Quantcast
Jump to content


Recommended Posts

Posted

James Ruesch, the owner of Ruesch Motor Company has milked DOZENS of dealers out of hundreds of thousands of dollars, and has somehow remained out of jail. I repeat, the creator and master mind of Ruesch Motor Sports (UTV, Side by Side, Panther Alpha Male) Ruesch Media, and many more that he (James L. Ruesch) founded is a SCAM ARTIST.

We don't take or say this lightly and completely understand the implications of this kind of statement, IF IT WAS SAID FALSELY. Be assured it is not.

Also be sure to visit http://www.ripoffreport.com/motor-vehicle/ruesch-motor-company/ruesch-motor-company-ruesch-ut-46d2e.htm

That will just get you started. If your still not convinced reply here and well be happy to unload the warehouse of crap we and dozens of other dealers have had to endure.

James Ruesch has taken, scammed, stolen HUNDREDS OF THOUSANDS of dollars from the new dealers that he "Trained" in Las Vegas and has either not delivered any product to them OR has given them machines that are in VERY VERY poor condition/quality.

The machines are what many people originally thought when he first came to market… They are CHEAP CHINESE CRAP. (see the last post from link above, it's from the manufacturer them selves!)

He is not building these machines from the ground up, but is using an existing Chinese UTV company and then tweaking the machines a bit to call it his own .

BUYER/DEALER BEWARE! ASK A LOT OF QUESTIONS AND ASK FOR FINANCIALS! (You wont see um)

(RE: The James Ruesch Scam, James Ruesch Financial Status, James Ruesch China Chinese UTV, Ruesch Motor Company, Panther Alpha Male, Ruesch UTV)

Posted

This would carry a lot more creditability if you did not hide behind a alternative log-in name. Who are you? I always have concern when people share very little info in their profile!

Sadly there are TONS of persons & scams out there we all must beware of and usually on both side of an issue or event.

rocmoc n AZ/Baja

Posted

theloser, I've just found your post and I must say, I'm shocked to read this. I always thought of Ruesch as a well organised UTV company. I've also read the link and that's not good reading. Could you please let us know more about you like rocmoc said above, just to make sure your not the scam, but in saying that, I'm willing to believe what you have said. Even if you want to P.M rocmoc (the super moderator) to confirm with him, but stay private.

Wow, the world is going crazy.

Cheers Mike

  • 2 months later...
Posted

I also did a little digging on the Reusch brand. In digging I discovered that "TheLoser" has posted the exact same verbage on another site under the screen name "Beenhad". I also discovered that the Chinese MFG. that makes the UTV that he was selling, is offering them for about 4K USD a pop. I think that I would just about take a chance on one at that price.. I know that my sons Kawasaki 90 ATV and also the Polaris 90 and also the Polaris Kids SXS 170 are made by Kymco. My kids bike has been flawless. I have seen many of the SunL 150cc gocarts running around.

Myron

Posted

Think resale! That is where we with Joyners have been bitten with all the JMC cr*p. If you can't get it used at a good price, save your money, IMHO! Takes the excitement out quickly when you see your investment's valve cut in half over night. LOL, am I talking about toys or a home. Guess it is the same thing.

rocmoc n AZ

  • 10 months later...
Posted

Think resale! That is where we with Joyners have been bitten with all the JMC cr*p. If you can't get it used at a good price, save your money, IMHO! Takes the excitement out quickly when you see your investment's valve cut in half over night. LOL, am I talking about toys or a home. Guess it is the same thing.

rocmoc n AZ

With a lot of the reading I've been doing it seems to me that you are very knowledgeable with regards to Joyners'. I am contmeplating buying a 2008 T2 with low mileage and the seller says the upgrades have been done to steering, susp etc. What would be your best guess or advice on the 2008 model, the price is right at $6500 I think. Or should I spend a few more bucks and buy a newer model. I am assuming there were no 2010 models because of the closure of JMC. Your advice would be appreciated rocmoc as I plan on making the purchase by the end of Nov 11. Thanks

Posted

There are advantages to the 2008, fuel tank in the front is a major one IMHO, & disadvantages. The same holds true with the later models. The BEST model is probably the new 2011, YES there are new Troopers. The saying I hold to is buy the best that you can afford. In my opinion even if you purchase a new 2011 there will be mods that we have completed here that you will want to still do. Joyner has watch this site and asked the dealers what mods we have done. They have incorporated some of them but not all. The BEST upgrades are Tires/Rims, Cage mods, Shocks & Power Steering IMHO! These will cost so plan for the future.

A few of the biggest upgrades that HAD TO COMPLETED on the 2008 are

The brace on the rear diff must be replaced. The upgrade is stronger rectangle tubing. The original, it will fail, is round tubing.

Rear U-joint driveline replaced with a CV-joint driveline. The U-joint driveline will fail.

Brake rotors upgraded to larger rotors, there was an upgrade kit with master cylinder, new caliper mounts & larger rotors. The original were too small.

Fuel tank filler tube rotated upwards so you can get fuel in the thing.

Sending unit will fail and the replacement was only guaranteed for 30 or 45 days as I remember, wasted money. I have not replaced or fixed mine yet.

These are the main issues on the 2008 that come to mind at the moment.

The intake Air Cleaner is junk on ALL of them, replace immediately with a K&N or similar or you will be rebuilding you engine soon.

ALL of them require, IMHO, Lenny's diff upgrade kit. The later models were suppose to be better but we have not had any feeback.

Hope this helps.

rocmoc n AZ

Posted

With a lot of the reading I've been doing it seems to me that you are very knowledgeable with regards to Joyners'. I am contmeplating buying a 2008 T2 with low mileage and the seller says the upgrades have been done to steering, susp etc. What would be your best guess or advice on the 2008 model, the price is right at $6500 I think. Or should I spend a few more bucks and buy a newer model. I am assuming there were no 2010 models because of the closure of JMC. Your advice would be appreciated rocmoc as I plan on making the purchase by the end of Nov 11. Thanks

IMHO Buy a RZRS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By hisun junk
      As I tried to do a conversion with the Yamaha 660 motor, I realized the 660 was never fuel injected so it would not work for the fuel injected hisun motor swap. But the good thing is the hisun 750 motor is a clone of the 660 Yamaha but with the components for the fuel injection (cam/crank position sensor). So that left me with a new rebuilt Yamaha 660 and still a broke 750 hisun motor. I took apart 750 think the timing chain had broke from all that I've heard about these motors. The chain was not broke, but just off cam and crank gears! The chain tensioner was at fault!  I've ordered Yamaha 660 replacement parts, chain, two exhaust valves (which got bent when chain came off while motor was spinning) and seals. The piston has 2 little nicks where it had hit valves but no damage otherwise. The head is being redone at the machine shop and I'll be putting it back together in the next couple of weeks. Also I finally tracked down a Service Manual with all the info on the 550/750 Challenger.

    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
    • By Polish DIY Lover
      Hi i'm jakub and i making DIY UTV. Some questions?
    • By shawn b
      my hisun died on me while driving it started losing power then stalled. it wants to start but wont . it didn't over heat. I replaced plug,fuel filter injector, and fuel pump.put code reader on it and says no codes. have any ideas possibly sensor? Any input on what it could be would be appreciated
×
×
  • Create New...