Quantcast
Jump to content


Recommended Posts

Posted

Hi Silverbullet.

We have made a deal with one of the best know suspension raceing companys.To build from the bottom up ball joints for the Trooper Renegade Commando Spyders.Besides being top quality they will be rebuildable.We will stock all parts needed to rebulid them.And carry them in stock.They will be sold in sets.We strive to make Joyners better all the time.Coming soon!

Forged Pistons stock compression in stock 1100cc.Headgaskets also in stock.

Thank You

Rick

Posted

Great keep up the good work I will take two sets just let me know when you get them. What about a better brake caliper the rattling noise drives me crazy

Posted

Plumber, the rattling noise is a GOOD noise. It means your pad is free to do it's job. They place clips on street cars to keep them from rattling but increase drag on the pads to the rotor surface. Racer always remove the clips to get max speed/power. IT IS A GOOD SOUND! All of my toys rattle except the two street vehicles.

rocmoc n AZ/Baja

Posted

Plumber, the rattling noise is a GOOD noise. It means your pad is free to do it's job. They place clips on street cars to keep them from rattling but increase drag on the pads to the rotor surface. Racer always remove the clips to get max speed/power. IT IS A GOOD SOUND! All of my toys rattle except the two street vehicles.

rocmoc n AZ/Baja

rocmoc,

This is true but the rattling noise drives me crazy

  • 12 years later...
Posted
On 10/18/2010 at 6:43 PM, silverbullet said:

Hi Silverbullet.

We have made a deal with one of the best know suspension raceing companys.To build from the bottom up ball joints for the Trooper Renegade Commando Spyders.Besides being top quality they will be rebuildable.We will stock all parts needed to rebulid them.And carry them in stock.They will be sold in sets.We strive to make Joyners better all the time.Coming soon!

Forged Pistons stock compression in stock 1100cc.Headgaskets also in stock.

Thank You

Rick

Where can I buy them?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Nutcase
      I have a Joyner Trooper 1100 4 place that has been sitting for a number of years. I have everything taken care of but i can't get the fuel through the injectors. Fuel pump puts full pressure on them but they don't turn on or spray fuel. Any ideas?
    • By JSwearer
      Does anyone have any suggestions for aftermarket shocks.  I have a T-Boss 550 and took it riding in some rough trails and the stock suspension was uncomfortably rough.
      Thanks
    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By JimWil
      Looking for a place/website to order a  replacement bench seat and a dump bed fender from.
      Pics are the original orange when purchased and after painting with a textured bed liner type coating.
      Just looking for those two parts as mentioned above.
      JimWil
×
×
  • Create New...