Quantcast
Jump to content


Recommended Posts

Posted

thinking about buying a 2008 trooper.are they reliable are parts easy to get .have hondas lovem.wanna try a joyner just need some info.thanks

Well just about every thing that Trooper does, good or bad, has been mentioned on this forum and we're all here to add our comments, so sit back, put your feet up and read. The Trooper has it's faults, but, INHO, there's no other vehicle like it, lots similar, but it depends on what you like.

I like the 4 cylinders and the standard tranny, the seating, the layout, it just seem to work well for my conditions.

Kinarfi

Posted

Well, I'm new here . Bought my 2008 trooper the end of july 2010,had 600 miles on it.I love it as does everyone who see's it. I have done the differential fix, the steering tightning fix, new tie rod ends,.. I have put 1000 miles on since I bought it, only a couple minor easy to fix problems, but many hrs of great fun & enjoyment. I actually have guys asking every trip if i will sell it!! I'm hooked,, Hope this helps, just my honest opinion,,,,Quig

Posted

Honestly I would NOT purchase my Trooper again. Love that I have it but there is no comparison with Honda. I have had to make WAY TOO MANY MODS to stabilize it. If I had to to it over again I would look at RZR or the New Can Am first. You will have to be major mechanically inclined or have a health wallet at time goes by to keep the Trooper on the road. Parts are not nearly as available and thus far the Company it's self is not dependable. Aftermarket is nearly non-existence even tho a couple remarkable dealers are trying. I have been to the UTV Rally in Moab and can say the others preform nearly as well and are easier to drive at times. Have no plans of selling mine but would not buy another. I have had mine since Dec '07 so have played with it a lot. Still have my '83 Suzuki PE and '04 Honda CRF450 so I do know what quality is in off-road equipment. I had hoped that by this time Joyner would have stepped up their game but they are / have p*ssed away the opportunity! I will always give my objective opinion even if it hurts. JMHO!

rocmoc n AZ/Baja

Posted

Honestly I would NOT purchase my Trooper again. Love that I have it but there is no comparison with Honda. I have had to make WAY TOO MANY MODS to stabilize it. If I had to to it over again I would look at RZR or the New Can Am first. You will have to be major mechanically inclined or have a health wallet at time goes by to keep the Trooper on the road. Parts are not nearly as available and thus far the Company it's self is not dependable. Aftermarket is nearly non-existence even tho a couple remarkable dealers are trying. I have been to the UTV Rally in Moab and can say the others preform nearly as well and are easier to drive at times. Have no plans of selling mine but would not buy another. I have had mine since Dec '07 so have played with it a lot. Still have my '83 Suzuki PE and '04 Honda CRF450 so I do know what quality is in off-road equipment. I had hoped that by this time Joyner would have stepped up their game but they are / have p*ssed away the opportunity! I will always give my objective opinion even if it hurts. JMHO!

rocmoc n AZ/Baja

I agreed with rocmoc I like my trooper but parts are hard to get.If I had to do it over it would be the rzrs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By TPlummer
      We recently purchased the Axis x550. Fueled it with 93 fuel and drove one time around the farm and the 02 fault error appeared. Any ideas? 
    • By JimWil
      Looking for a place/website to order a  replacement bench seat and a dump bed fender from.
      Pics are the original orange when purchased and after painting with a textured bed liner type coating.
      Just looking for those two parts as mentioned above.
      JimWil
    • By joynersfuntillitbreaks
      so i just picked up a 2008 1100 trooper and iv ordered a few parts for it now and 99% of what i got fits perfect my issue now is my rear wheel hub is stripped out got a new cv and it fits great but i order 2 different hubs from 2 different places now and they are both wrong the spline opening is to small to fit the factory cv shaft and yes the shaft factory part #s are the same paid 250 for an original new replacement if anyone has anything that works to replace the original hub please point me in the right direction 
×
×
  • Create New...