Quantcast
Jump to content


Where's everybody?

Quig

By Quig
in General Discussion - Anything

 Share

Recommended Posts

Quig Community Regular

Quig

Posted
Posted

Quig is bored, no one posting anything!! Someone talk,or even to me. I'm not smart, so be easy, or just bs. Mods, feel free to delete.

Kinarfi Veteran

Kinarfi

Posted
Posted

Quig is bored, no one posting anything!! Someone talk,or even to me. I'm not smart, so be easy, or just bs. Mods, feel free to delete.

I see that & agree, I'll be posting some photos in a while that may get me harassed or nick named Mr. Clean, I'll delete this later if it doesn't stir up something.

Kinarfi

Quig Community Regular

Quig

Posted
  • Author
Posted

I see that & agree, I'll be posting some photos in a while that may get me harassed or nick named Mr. Clean, I'll delete this later if it doesn't stir up something.

Kinarfi

Would love to just bs, swap stories. anything? Thanks. Always interested in how to's & what to's,,,Quig

ricksrb Mentor

ricksrb

Posted
Posted

Would love to just bs, swap stories. anything? Thanks. Always interested in how to's & what to's,,,Quig

Nice to see something here.I was beginning to think everyone else was out riding and I was stuck here by myself.(LOL)

Quig Community Regular

Quig

Posted
  • Author
Posted

Nice to see something here.I was beginning to think everyone else was out riding and I was stuck here by myself.(LOL)

I got enclosure on, & lexan windshield,, need to go somewhere!! Also waiting on ball joints, mine should be ok, I hope for awhile. Just cold & windy here, no snow yet..

Have some new foldable mirrors coming, need longer arms on them because of enclosure, found some in jc whitney for jeep.

ricksrb Mentor

ricksrb

Posted
Posted

I got enclosure on, & lexan windshield,, need to go somewhere!! Also waiting on ball joints, mine should be ok, I hope for awhile. Just cold & windy here, no snow yet..

Have some new foldable mirrors coming, need longer arms on them because of enclosure, found some in jc whitney for jeep.

does your enclosure have the canvas sides and come from joyner? I purchased a kit for my T-4 from a guy that bought some at the joyner auction and it had the windsheild,hard top,rear widow and canvas sides but came with no directions on how to hang the top of the sides.Not sure if I will use them anyway but would be nice to know.

Quig Community Regular

Quig

Posted
  • Author
Posted

does your enclosure have the canvas sides and come from joyner? I purchased a kit for my T-4 from a guy that bought some at the joyner auction and it had the windsheild,hard top,rear widow and canvas sides but came with no directions on how to hang the top of the sides.Not sure if I will use them anyway but would be nice to know.

Mine is trooper 2,, I got one of brostars new ones. It is fantastic, it is completely enclosed,& great instructions on how to install. But, it is also one piece. He put up pics on forum.

Quig Community Regular

Quig

Posted
  • Author
Posted

Nice, thanks rocmoc,..that was good,,,,, See, you guys are out there!!! lol

When you get old, like me, you don't have many buds, so you guys talk to me more, lol,, ok? or, each other,

rocmoc Grand Master

rocmoc

Posted
Posted

Hello Quiq,

I was thinking the same thing where have all the people gone and I was going to post my earlier post but you beat me to it. So I had to post my song anyway. Glad you enjoyed it. We are still on the road in the RV but will be home Monday. Been gone 3 weeks.

Have to make some RV repairs before we meet Rick in LH. Door on the Frig broke the lower hinge and is falling off, one of my spring hangers has worn a slot in the spring/shackle bolt hole so the shackle bolt is moving up and down with a couple of the axle springs and a lady ran a stop sign in the SF Bay area and hit my truck. Already has been estimated and it came in at $2470 of repairs to my truck. But we are fine and doing well. BUT can't wait to get home!

Lenny I wll make my own new hinge as I read on the internet that is a common failure with the RV frigs. Will us ALUMINUM!

On the positive side I will have the $ to order at least the rear shocks and hopefully will have enough soon to order the fronts also. Problem is I have to get new corner weights for the Trooper since I made all the changes to the cage the Trooper is lighter and weight is redistributed.

Well that is what is happening with us. Take care all and hope you are looking at getting that Turkey.

rocmoc n AZ

brostar Proficient

brostar

Posted
Posted

does your enclosure have the canvas sides and come from joyner? I purchased a kit for my T-4 from a guy that bought some at the joyner auction and it had the windsheild,hard top,rear widow and canvas sides but came with no directions on how to hang the top of the sides.Not sure if I will use them anyway but would be nice to know.

Rick, email me at [email protected] and I will forward onto you the instructions you need for you enclosure. It's a file from the old Team Joyner crowd and I can not post it here.

Here is my video in the theme of things for the rest of you. Oh yeah and roc, Micky J is both older and younger than you.

http://www.youtube.com/watch?v=oxcvPFKgl2g&feature=related

Cheers Mike.

Quig Community Regular

Quig

Posted
  • Author
Posted

Hey Quig, your probaly more bored now with out taste of music and seen as how your missing us all, the song below is just for you.

I step out for a minute, you guys go nuts!! lmao,, see, lots of bored people, lets keep it going, at least once a day? lol, Enjoyed it all!! I'm younger than I thought, "59"

ricksrb Mentor

ricksrb

Posted
Posted

I step out for a minute, you guys go nuts!! lmao,, see, lots of bored people, lets keep it going, at least once a day? lol, Enjoyed it all!! I'm younger than I thought, "59"

rocmoc Grand Master

rocmoc

Posted
Posted

We are in San Diego and rain arrived. Looked at the weather at home, dry and beautiful. Home on Monday!

How much snow? We are with friend who live in St. Charles, Id and will be returning home starting Monday.

rocmoc n AZ

Quig Community Regular

Quig

Posted
  • Author
Posted

We are in San Diego and rain arrived. Looked at the weather at home, dry and beautiful. Home on Monday!

How much snow? We are with friend who live in St. Charles, Id and will be returning home starting Monday.

rocmoc n AZ

[/quote

2" maybe, melting off fast. mts were supposed to get 5 to 10" I live close to TwinFalls. Not familar with St. Charles?

Quig Community Regular

Quig

Posted
  • Author
Posted

St. Charles is in the SouthEast corner on Bear Lake.

rocmoc n AZ

Found it on my topo map, never been there or very close. Looks like it would be beautiful country. Have heard about Bear lake.

Quig Community Regular

Quig

Posted
  • Author
Posted

Well, big storm came in, wind,snow,drifts, roads closed,schools closed, supposed to get worse tonite & wed. 25 below with wind chill, really sucks.

Quig Community Regular

Quig

Posted
  • Author
Posted

Well, big storm came in, wind,snow,drifts, roads closed,schools closed, supposed to get worse tonite & wed. 25 below with wind chill, really sucks.

Well, 1st real ride in the snow,,Wow! What a blast! enclosure worked great, no wind, not bad tempature inside . Handled real well, until snow got up to undercarriage, 12" was fine, but deeper,started worrying, & it started to high center. Cookies, & hills were a blast. Front end & engine compartment completely packed with snow. Wheels & tires look like powder donuts.

Kinarfi Veteran

Kinarfi

Posted
Posted

St. Charles is in the SouthEast corner on Bear Lake.

rocmoc n AZ

A few more miles south and you would have been in Utah. Come back in when it's warm and I'll introduce you to American Fork Canyon and some other beautiful mountains.

Kinarfi

Quig Community Regular

Quig

Posted
  • Author
Posted

A few more miles south and you would have been in Utah. Come back in when it's warm and I'll introduce you to American Fork Canyon and some other beautiful mountains.

Kinarfi

Well, if you are talking to Quig? That might happen,, You answered Rocmoc? Anyway, would love to come see your mts. Wife is ill, so would have to figure sometime when I could get someone to be with her, but will try, Always looking for new places, & buds who know where to ride,,,, Thanks...Quig

rocmoc Grand Master

rocmoc

Posted
Posted

Well, if you are talking to Quig? That might happen,, You answered Rocmoc? Anyway, would love to come see your mts. Wife is ill, so would have to figure sometime when I could get someone to be with her, but will try, Always looking for new places, & buds who know where to ride,,,, Thanks...Quig

Kinarfi knows I am not coming North into the Cold. Think he was talking to you.

We are home and starting to fix stuff. We are bearly reaching 60 degrees today but it is bright & sunny. Sure nice to be home!

rocmoc n AZ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Jacob E freeman
      2018 cub cadet challenger 750 over heats no one knows why
      By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • Clayton Walker
      Im New here but just got my Uforce Fitted for Hunting Season
      By Clayton Walker
    • diamondjfarm
      Good mornin' all. Just joined.
      By diamondjfarm
      I got an old 2003 Arctic Cat 375 Auto, and just bought a 2008 AC 650 side by side. Got a new starter, solenoid, and battery for the 650. Gonna change the crankcase oil and filter while I'm at it.
      Anything I oughta watch out for from them that's done the starter/solenoid on this model?
      Don't have a manual yet for the 650. Any recommendations for oil weight/grade?
      Thanks.
    • strike250
      Free Massimo Buck 400 service manual
      By strike250
      I have the factory service manual available for the Buck 400. Just send me a message with your email and I'll get it to you. Although there is no charge for this, it would be great if  you would visit my website where you could donate any amount to help do things like this with others who need it. Again, there is no charge for this manual, and no obligation to donate. But if you did, I would thank you for sure. Have fun on the trails. www.warriorsoffroad.com
       
      Matt

    • Greg Kilgore
      Cooling fan. Not just for radiators.
      By Greg Kilgore
      We all know summer is hot inside the cabs of our SXS. So I've rigged up a couple of fans to help cool down the cab.
       
      I didn't want to drill the fan's "support rails" into the ROPS (Roll Over Protection System), aka roll bars. So I used water clamps to hold them in place. 
       
      I just need to replace the wires I ran with bigger gauge. Then finish the wiring to switches, relays, and battery. But the hardest part. The actual mounting of the fans is complete. Also just in case anyone plans on doing this. I may have to only use 1 fan in the middle instead on 2. Due the the draw on the battery.
      The fans are 12", 12V 80W. So I'm figured they were 6.7 amps apiece. Used the WAVe formula to get unknown values Watts=Amps*Volts then solve for unknown. I know the watts and volts from sticker on fan. So just used above formula to get amps. So a 7 amp fuse should be OK and a 10 amp fuse will be good. 
      So pulling 14 amps from the battery all day may be too much for the charging system to keep up with. And I haven't even installed the radio yet. So I will have to test and let you know.
       
      See pics below.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...