Quantcast
Jump to content


Joyner Parts for Renegade and Trooper

doonrunr

By doonrunr
in Joyner UTV SxS Forum

 Share

Recommended Posts

doonrunr Newbie

doonrunr

Posted
Posted

Just an introduction as I have not been a member on this forum.

Unfortunately....it is not because I plan to be active here.

Due to the recent actions(or NON) of TJUSA and JMC this last year I have been forced to close the doors of my business EDGE Powersports. If I cannot get parts or machines then there really is no point. I have become discouraged by my lack of ability to service customers and their needs.

So now to the point of my post here.

I do have some leftover new parts that would fit the Renegade and Trooper machines. Though there is not much but perhaps someone here would be interested. These parts are dealer cost.

1 Box internals 800 renegade fron differential...These are new. They were removed from new renegade diff as JMC sent me the wrong one. -SOLD!

2 Starters 800/1100 Joyner....will fit either Renegade or Trooper -1 SOLD!

1 electric odometer assembley 800 Renegade

1 Trooper T2 rear drive line upgraded CV style

Sincerely

Glade Mason

ricksrb Mentor

ricksrb

Posted
Posted

Just an introduction as I have not been a member on this forum.

Unfortunately....it is not because I plan to be active here.

Due to the recent actions(or NON) of TJUSA and JMC this last year I have been forced to close the doors of my business EDGE Powersports. If I cannot get parts or machines then there really is no point. I have become discouraged by my lack of ability to service customers and their needs.

So now to the point of my post here.

I do have some leftover new parts that would fit the Renegade and Trooper machines. Though there is not much but perhaps someone here would be interested. These parts are dealer cost.

1 Box internals 800 renegade fron differential...These are new. They were removed from new renegade diff as JMC sent me the wrong one.

2 Starters 800/1100 Joyner....will fit either Renegade or Trooper

1 electric odometer assembley 800 Renegade

1 Trooper T2 rear drive line upgraded CV style

Sincerely

Glade Mason

Glade,

Sorry to hear about the closure.Could you post prices? I know you said at dealer cost but what are the prices?

Thanks,

doonrunr Newbie

doonrunr

Posted
  • Author
Posted

Glade,

Sorry to hear about the closure.Could you post prices? I know you said at dealer cost but what are the prices?

Thanks,

ROCMOC just bought a starter and the differential parts.

The other starter $75

The rear T2 driveline $100

and the Speedo sender unit $45.

Sorry there is not more. I know you guys have had to adapt to this poor situation. I love the machines and regret this action that I have been forced to take.

Glade

ricksrb Mentor

ricksrb

Posted
Posted

ROCMOC just bought a starter and the differential parts.

The other starter $75

The rear T2 driveline $100

and the Speedo sender unit $45.

Sorry there is not more. I know you guys have had to adapt to this poor situation. I love the machines and regret this action that I have been forced to take.

Glade

Thank you for posting the prices,I will check on the starter.I think i have a spare,if not i will PM you.

Guest Lenny

Guest Lenny

Posted
Posted

Good price on the driveline. I spent $30 just for the replacement boot and the install is a pain.

rocmoc n AZ

I sent you a PM

Lenny

doonrunr Newbie

doonrunr

Posted
  • Author
Posted

Do you still have the driveline available?

Yes I still have these parts available

The other starter $75

The rear T2 driveline $100

and the Speedo sender unit $45.

OH.....Just rounded up a throttle cable if anyone interested. I have 2 locker cables that I found too.

$30 for the throttle and $20 for the locker cables.

Glade

  • 3 weeks later...
doonrunr Newbie

doonrunr

Posted
  • Author
Posted

Yes I still have these parts available

The other starter $75

The rear T2 driveline $100

and the Speedo sender unit $45.

OH.....Just rounded up a throttle cable if anyone interested. I have 2 locker cables that I found too.

$30 for the throttle and $20 for the locker cables.

Glade

BUMP

  • 2 weeks later...
Jarrad Community Regular

Jarrad

Posted
Posted

I happen to have 2 late 09 models here that came in yesterday that are green. One has 16 miles other has 13 miles. Also a red late 09 with super low miles

russell Newbie

russell

Posted
Posted

im in need of spyder gears and pins for a 08 t2,does any one know if any other ones are compatible,or has anybody welded whats left of the spider gears <lincoln locker??? I HAVE PUT 20 MILES ON IT SINCE IVE HAD IT <i took it apart to put an upgrade kit in it and it was to late

Jarrad Community Regular

Jarrad

Posted
Posted

You say you put 20 miles on it since you have had it, how many miles are on the unit? And what is wrong with the spider gears that they need replaced?

russell Newbie

russell

Posted
Posted

bought it from a buddy that bought it brand new,he put 460 miles km? it sat is his garage 4 the last 2 years,just never wanted to play .well like a regular problem the set screw either sheared off or backed it self out ate up all the spider gears and broke both pins.ring and pinion look great they might of even shimmed those correctly.lol a couple of the ring gear bolts were stripped to but did not hurt anything yet .do you guys have parts or just full diffs?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Clayton Walker
      Im New here but just got my Uforce Fitted for Hunting Season
      By Clayton Walker
    • Kingfish
      Now that I have done the LI-Ion batt conversion, I need to do something about the suspension
      By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • mac66
      Anyone have a Bad Boy Bandit?
      By mac66
      Apparently, these are Hisun or at least they use Hisun engines. I can't find much info on them online yet.  Ran across a used one with just 100 miles on it as a very reasonable price.  Just curious.
      Okay, more info...they are owned by Textron Corp who also owns Bell Helicopter, Cessna & Beechcraft aircraft, Ez-Go & Cushman and Arctic Cat and a bunch of other companies.
      So are thy cheap Chinese crap machines or are they good to go?
    • sxr951
      anyone ever have to beat your starter out with a hammer till it broke in half?.lol
      By sxr951
      corrosion had its oring neck area  jammed in.. and besides that had corrosion in the starter just shorted when ran direct jumper cable to the starter post power to it

    • eManualonline.com Save 30% OFF Sitewide, Use code: XMAS30
    • donny
      New here in NC
      By donny
      Hey everyone new to forum I have a 2014 Odes raider and a 2009 Suzuki Ozark 250 both down atm 😔

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...