Quantcast
Jump to content


Recommended Posts

Posted

The Joyner spare parts draught is over thanks to No Limits Powersports, your source for Joyner Parts. They will be landing the first container of two in the next couple of days. These two containers are packed solid with genuine Joyner parts. For more info please don’t hesitate to contact Snowman6479 right here on UTV Boards or No Limits direct. Please support the people that have backed Joyner from the beginning, into the good old days, then through the dark days we are now climbing out of and into the future. These guys have been there through thick and thin and are the retail flagship for the brand. They will be our future too, so why would you look elsewhere. Do yourself a favour and back the people that backed our brand.

Cheers Mike.

Posted
  On 1/11/2011 at 5:00 AM, brostar said:

The Joyner spare parts draught is over thanks to No Limits Powersports, your source for Joyner Parts. They will be landing the first container of two in the next couple of days. These two containers are packed solid with genuine Joyner parts. For more info please don’t hesitate to contact Snowman6479 right here on UTV Boards or No Limits direct. Please support the people that have backed Joyner from the beginning, into the good old days, then through the dark days we are now climbing out of and into the future. These guys have been there through thick and thin and are the retail flagship for the brand. They will be our future too, so why would you look elsewhere. Do yourself a favour and back the people that backed our brand.

Cheers Mike.

Thats great to hear,maybe they can give us a general list of what they have once unpacked.

Posted

Quick update. Still sorting through it all right now but here is a list of diffs so far.

Renegade front 1

Renegade rear 4

Trooper front 2

Commando rear 7

Trooper rear 10

Posted
  On 1/14/2011 at 7:23 PM, rocmoc said:

I hope the higher numbers aren't an indication of the weakest link, LOL!

rocmoc n AZ/Mexico

The diffs are a weak link. My first diff had chips out of the pinion gear from poor alignment. We all know that the diffs can shear the bolts off and Joyner didn't provide a fix but just a new diff. I can see where they went through a number of them. It's important to get the diff set up correctly and then it should be much more reliable. Rick, if those were the prices, I would buy them all if you didn't get them first.

Lenny

Posted
  On 1/14/2011 at 7:56 PM, Lenny said:

The diffs are a weak link. My first diff had chips out of the pinion gear from poor alignment. We all know that the diffs can shear the bolts off and Joyner didn't provide a fix but just a new diff. I can see where they went through a number of them. It's important to get the diff set up correctly and then it should be much more reliable. Rick, if those were the prices, I would buy them all if you didn't get them first.

Lenny

yes,I already sent him a check for em all.(LOL)

  • 4 weeks later...
Posted
  On 1/14/2011 at 5:28 PM, Jarrad said:

Quick update. Still sorting through it all right now but here is a list of diffs so far.

Renegade front 1

Renegade rear 4

Trooper front 2

Commando rear 7

Trooper rear 10

I have a 06 C2 and need a rear diff as well as some more power... Got any of either for me?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to ylf0302@hotmail.com and cc to casey2leafasia.biz & 908926390@qq.com)
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By Bobbers
      My wife accidentally ran the Axis 500 into a fence and tore the front end up (broke her arm too). Just wondering where the best place to get front end parts? I know she busted the knuckle but haven’t jacked it up yet. Thanks guys for any help!
    • By D MAYNARD
      I have an Axis 500 4x4 UTV that I was given.  It looks like an almost new machine with 39 hrs on it however it was apparently under water from the hurricane . I have no spark at the plug. I have replaced the plug, the plug wire, & the stator so far. Can anyone advise me of what i need to check and or replace to get this thing running? Any advise would be greatly appreciated. 
                                    Thank You,
                                  D Maynard 
       
    • By CYJSP2009
      Dear Friends, 
      2022 Brand new Joyner CV Axles and CV  Joint rebuild kits are comming 
      1.  S650.03.02.02.00 ---Joyner 650 Commando Rear
      2. TR1100.03.01.03.00 --- Joyner Trooper Front 
      3. TR1100.03.02.03.00 --- Joyner Trooper Rear
      4. D650.03.02.02.00 --- Joyner 650 Sand Spider Rear Left 
      5. D650.03.02.03.00--- Joyner 650 Sand Spider Rear Right 
      6. SV800.03.02.01.00 --- Joyner 800 Viper, SV1100 Drive shaft Left
      7.  14274 --- 650 ider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      8. 15803  ---  650 Sand Spider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      Attached are the part photos for reference. 
      Above parts are now on the way to USA, will be ready for inland delivery in middle of July. 
      Price: CV Axle: USD250/ Piece;  CV Joint kit (without grease): USD110  send to door. 
      There will be special discount availabe for deals completed within July 2022.  
      Buy 1 piece: Get 5% discount, 
      Buy 2 pieces: get 10% discount.
      Buy 3 pieces: get 15% discount, 
      Buy 4 and more than 4 pieces: get 20% discount. 
      Please kindly note Qty for each part is not big  and it is hard to forcast when there will be next offer for these kind of products unless there is sufficient confirmed order qty for productioin arrangement. 
      Payment method: Payoneer payment link ( can pay through bank account or credit card) or Paypal ( casey@leafasia.biz) .  Payment commission paid by the buyer. 
      Interested parties, please contact casey@leafasia.biz. 
      Thanks
      Good Luck
      Casey / Leaf Asia
      July-07-2022
       
       
       














    • By staind
      Looking for information on installing a OBD port or a lite to read codes in ECM. 
      I can not find a OBD port or a lite to read codes on this R2 with 800cc. 
      I have code readers and adapters for most ATV's. From what I've found so far. They don't have a connection for to read codes. I may be wrong. That's why I'm asking. 
      This R2 has had new IAC, TPS, MAP, fuel pressure regulator and fuel pump replaced. This was done by neighbor to try to stop surging. It still surges on start up and then settles down. But once you hit the accelerator it revs up to 2000+ rpm and stays till you block off IAC port in throttle body with finger. Once you do that it once again settles down and idles perfectly.
      I want to know what the ECM is reading to help dio it.
      This joyner is the first one I've run across. Well second one in a week. (my neighbors 2 of them) The other was a trooper with the 1100cc chery motor that had been setting for years. After cleaning up the fuse box connections. It runs like a top. Had to replace all gages with aftermarket gages. Water, oil, gas, amp. Only problem one was the water temp using original sending unit. Had to install 150 ohm resistor on the input wire to get it to read correctly + - 5 degrees. Close enough. Gas sending unit was/is for a boat tank 6" tall. All SS so it should last forever. 
      thanks Dan D. aka staind
×
×
  • Create New...