Quantcast
Jump to content


Recommended Posts

Posted

Ric

Here are pics I took today.Also some of the extras(not inc set of barely used tires w/black stock rims)

There is an extra winch,ball joints ,set of new brakes, adj steering box w/dirt boots, etc,etc.... Anyway

you know more about all this stuff then I. I was amazed at what you could see from just a few older pics.

Stuff I hadn't even seen in person! Anyway, here she is!

real nice and clean looking.Have you done any advertising to sell it?

Posted

I listed it on craigslist here,locally.Got a few inquiries, but a lot of BS so far.

That site is ok, but the spam,scam and idiot factor is a little over the top.

Posted

I listed it on craigslist here,locally.Got a few inquiries, but a lot of BS so far.

That site is ok, but the spam,scam and idiot factor is a little over the top.

I'll take it. A money order is in the mail to you and you should receive it tomorrow. My driver will be there to pick it up this afternoon. Just kidding; If your over 10 years old and you fall for this one you have problems. I see this type of thing all the time on ebay, KSL and Craigslist. Scams are all over the internet like you said.

Lenny

Posted

I'll take it. A money order is in the mail to you and you should receive it tomorrow. My driver will be there to pick it up this afternoon. Just kidding; If your over 10 years old and you fall for this one you have problems. I see this type of thing all the time on ebay, KSL and Craigslist. Scams are all over the internet like you said.

Lenny

What about the one where they are sending a check for more then the asking price and wants you to keep a little extra and send them back the rest.

Posted

What about the one where they are sending a check for more then the asking price and wants you to keep a little extra and send them back the rest.

You talking about the one where they say they discovered $250,000 in a foreign account but regulations keeps them from getting it out so they will send it to you and you pay them 1/2 back and keep the rest. It's simple, all you do is give them all your checking account information. You don't think they just want to empty your account do you? No people aren't like that, are they?

Lenny

Posted

You talking about the one where they say they discovered $250,000 in a foreign account but regulations keeps them from getting it out so they will send it to you and you pay them 1/2 back and keep the rest. It's simple, all you do is give them all your checking account information. You don't think they just want to empty your account do you? No people aren't like that, are they?

Lenny

Ive had that one to.The one im talking about is the have someone that will pick it u and ship it to them but all they need is all my banking info to deposit more then what i am asking and give me extra for my troubles.once i get their money just send them back whats left over.Yea right,what will be left over once they have my banking info(not that there is anything they could get anyway).

Posted

A INEX Legends with the '37 Chevy Sedan body. This is one of the ladder classes for Nascar but you can also roadrace them. Top speed 150 mph. When I race a 3/8 mile track, I am doing around 90 mph when I go into the corner. Major rush. Problem is a new owner took over the Tucson track and eliminated our class. I don't feel like moving over to the dirt track and racing at 9-10pm at night isn't as fun as it use to be. I have been the oldest guy out there for the last few years. But had a ball and ready to move on to something else. Here is a link to it on Craigslist, http://tucson.craigslist.org/cto/2192824176.html

rocmoc n AZ/Mexico

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • By Prepper
      I'm working with a 2015 MSU-500.  Basic symptoms are it cranks well, but will not fire.  It has spark, and it has fuel spraying out of the injector (and spraying starting fluid into the throttle body and plug hole makes no difference).  It has compression.  I bought it not running, and no other information was available.  It has 775 miles on it and 127 hours.  It looks to be in very good shape.   Previous owner replaced fuel pump, ECU, coil, plug, and the fuse/relay box that mounts on the firewall, then gave up.
      My questions relate to cam/valve timing, considering the symptoms and diagnostics so far.  My thinking was the woodruff key sheared off and the crank spun, making it out of time.  My question is, by the pictures attached does anyone have an opinion as to the cam/valve timing being correct?  In the crankshaft picture you can see a timing mark visible.  In the camshaft picture I have arrows directed towards what I think are timing marks (which appear to be exactly 180 degrees from one another).  However, the long arrow in what appears to be bolt configuration in line with the piston/rod line.  Here is a puzzling note... in the position you see in the pictures... I have valve lash on both the intake and exhaust.  I think it's at TDC, given the visible crank timing mark and valve lash on both valves. 
      Any thoughts ?  Does this appear to be in proper valve time ?  Have I missed anything simple ?  Thanks in advance for your input.


    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By CYJSP2009
      Dear Friends, 
      2022 Brand new Joyner CV Axles and CV  Joint rebuild kits are comming 
      1.  S650.03.02.02.00 ---Joyner 650 Commando Rear
      2. TR1100.03.01.03.00 --- Joyner Trooper Front 
      3. TR1100.03.02.03.00 --- Joyner Trooper Rear
      4. D650.03.02.02.00 --- Joyner 650 Sand Spider Rear Left 
      5. D650.03.02.03.00--- Joyner 650 Sand Spider Rear Right 
      6. SV800.03.02.01.00 --- Joyner 800 Viper, SV1100 Drive shaft Left
      7.  14274 --- 650 ider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      8. 15803  ---  650 Sand Spider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      Attached are the part photos for reference. 
      Above parts are now on the way to USA, will be ready for inland delivery in middle of July. 
      Price: CV Axle: USD250/ Piece;  CV Joint kit (without grease): USD110  send to door. 
      There will be special discount availabe for deals completed within July 2022.  
      Buy 1 piece: Get 5% discount, 
      Buy 2 pieces: get 10% discount.
      Buy 3 pieces: get 15% discount, 
      Buy 4 and more than 4 pieces: get 20% discount. 
      Please kindly note Qty for each part is not big  and it is hard to forcast when there will be next offer for these kind of products unless there is sufficient confirmed order qty for productioin arrangement. 
      Payment method: Payoneer payment link ( can pay through bank account or credit card) or Paypal ( [email protected]) .  Payment commission paid by the buyer. 
      Interested parties, please contact [email protected]
      Thanks
      Good Luck
      Casey / Leaf Asia
      July-07-2022
       
       
       














    • By Frank Mac67
      My Axis 500 has been operating properly for almost a year with Zero problems. While I was away my granddaughter & friends were riding & playing in the snow. They went to the gas station to fill the tank & the vehicle would not start afterwards. I BEEN GIVING MULTIPLE STORIES: The ATV will not start. When I turn the key I can hear the fuel pump come on but nothing happens other than that. 
      - NO CLICK - NO OTHER NOISE
      *I CHECKED THE BATTERY 12.43volts
      *I replaced the solenoid inside the battery compartment. 
      Seems the next electrical component in line has battery connections IN & motor connections OUT with 2 other small wires connectedaswell(I do not know the name of this component).
      Can anyone help?
      I can not find an ordered list of electronic components starting at the battery.
      Can anyone help with this?
      Thanks in advance for any help.
       
×
×
  • Create New...