Quantcast
Jump to content


Recommended Posts

Posted

We have been working with a ECU tuner .We have sent him all the connectors he needs to connect to Troopers .We should get one this week for testing.We have instaled a exhaust gas senser and exhaust temp senser on are Trooper ECU is set up all wrong. This info will be able to help him zero in on the exact set up on the controler.This also will work on the timing for max.torque. Be for we do any thing we will Dyno in all modes.We will see how good it works hopefully not to expensive.WE have been busy working on the ball joint issue.We have come up with an up grade to the stock ball joint we had custom ureathane boots made to fit tight and not rot or fall apart.We have instaled a grease fitting on the top and have found a grease made for cranes that will not break down or wash out.We are so sure that this will solve the ball joint issue,We are going to warrantey them for 1 year that the boot will not rot or fall off and ball joint will not fail.We will offer the grease if customer wants to perchase some it works great on the c/v's and steering boxes.It will make them run cooler than any grease that comes with c/v's

We have gotton our sintered metal brake pads they will stop a trooper with 31" tires.Great for- sand- water and mud.They should last longer than stock ones.They use these on race motorcycle's

We will have prices in about 1 week.On most products.Bilstein shocks for Trooper's coming soon and they will be affordable!

Silverbullet

Posted

Great Rick Let me know about that ecu

We should have ECU this week.We will dyno early next week.We wlll still have to due a few test to set it up.We want something that dose not go out of tune like some ECU did in the past.

Posted

Wow...Bilsteins! B) Are these the upgraded shocks that newer Joyners have; or strictly aftermarket? Adjustable? Remote reservoir?

We are working with bilstien to set them up for Troopers T2 T4 Vipers Geting the price down is the hard thing.These are aftermarket shocks not stock Joyner shocks the rear will have remote reservoir the front's we are still working on.

  • 2 weeks later...
Posted

We are working with bilstien to set them up for Troopers T2 T4 Vipers Geting the price down is the hard thing.These are aftermarket shocks not stock Joyner shocks the rear will have remote reservoir the front's we are still working on.

Anymore info on the shocks?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • By clint501
      I recently purchased a Hisun E1 and the other day the charger stopped working properly. The LED on the dash blinks red & green and the light on the side of the charger also blinks red & green. The fan on the charger does not come on like it used to do. There is no error code that I can see. Does anyone have any suggestions to remedy this?
    • By Homeowner A
      Coleman UT 400 has a strong sulfur/emissions smell from exhaust all the time.  Kind of like it’s running rich and a catalytic converter is trying to make it run cleaner so it smells bad. Also misfires when warm. Idles fine. Full throttle fine. In between it cuts out. Do these have catalytic converters?  Almost acts like it might be clogged if so. 
    • By CRV
      I’m need a couple parts. Diff. Lock Actuator mainly. But I would like to find a donor that maybe has bad motor or something along those lines. 
      if anyone has or knows of anything please holler at me 
      thanks Randy 
×
×
  • Create New...