Quantcast
Jump to content


Recommended Posts

Posted

Does anyone know how many Troopers are out there?, I ask because if there are significant #s than maybe we will se the return of Joyner in N.America.

I wrote the factory last week asking them if they had any plans of coming back to N.A. I have not recievied a response yet.

I sure like the Trooper but I would think it won't be to long before critical parts will not be available anymore.

Secondly, does anyone have a simple test to confirm if the Diff upgrade was done in a Trooper?

I have the 09 but it still has the Electric 4X4 shift and when I put it up on blocks all the wheels can move back and forth 4 to 5 inches (slack) the rear being the higher number (5 inches slack approx_

Thanks

BC Trooper

  • 3 weeks later...
Posted

Does anyone know how many Troopers are out there?, I ask because if there are significant #s than maybe we will se the return of Joyner in N.America.

I wrote the factory last week asking them if they had any plans of coming back to N.A. I have not recievied a response yet.

I sure like the Trooper but I would think it won't be to long before critical parts will not be available anymore.

Secondly, does anyone have a simple test to confirm if the Diff upgrade was done in a Trooper?

I have the 09 but it still has the Electric 4X4 shift and when I put it up on blocks all the wheels can move back and forth 4 to 5 inches (slack) the rear being the higher number (5 inches slack approx_

Thanks

BC Trooper

Hi BC Trooper the way I was told how to check to see if your rear diff was upgraded is easy. Just lift the rear end off the ground so that you can spin the rear wheels and do not forget to put jack stands under it !!! then remove the diffs oil fill plug look inside the filler hole with a flashlight and you will see the ring gear bolts, if your diff wasnt upgraded it will only have 10mm bolts in it and will also have saftey wire going through the bolt heads. If your diff was upgraded it will have 12mm bolts in the ring gear and will have the bend up steel tabs so the bolts cannot come loose, the bend up tabs are really narrow and you will have to look hard for them. As you are looking at the bolts just turn the tire by hand to look at all bolts. I did it this way with mine and I could tell that mine was upgraded.

Posted

Does anyone know how many Troopers are out there?, I ask because if there are significant #s than maybe we will se the return of Joyner in N.America.

I wrote the factory last week asking them if they had any plans of coming back to N.A. I have not recievied a response yet.

I sure like the Trooper but I would think it won't be to long before critical parts will not be available anymore.

Secondly, does anyone have a simple test to confirm if the Diff upgrade was done in a Trooper?

I have the 09 but it still has the Electric 4X4 shift and when I put it up on blocks all the wheels can move back and forth 4 to 5 inches (slack) the rear being the higher number (5 inches slack approx_

Thanks

BC Trooper

Critical parts are not going to become un-availible, Joyner is a Multi nation vestment and they are being distributed all over the world except for the US, EPA and CARB approval is holding those units back at the moment, I hear that they will be back in the states soon, I hope so becuase talking to the other distributors around the world the 2011 Trooper is leaps and bounds above even where the late 3 level 2009's were. The trooper only being 2 years old, it did make vast improvements, and continues today.

Jarrad

Posted

Hi BC Trooper the way I was told how to check to see if your rear diff was upgraded is easy. Just lift the rear end off the ground so that you can spin the rear wheels and do not forget to put jack stands under it !!! then remove the diffs oil fill plug look inside the filler hole with a flashlight and you will see the ring gear bolts, if your diff wasnt upgraded it will only have 10mm bolts in it and will also have saftey wire going through the bolt heads. If your diff was upgraded it will have 12mm bolts in the ring gear and will have the bend up steel tabs so the bolts cannot come loose, the bend up tabs are really narrow and you will have to look hard for them. As you are looking at the bolts just turn the tire by hand to look at all bolts. I did it this way with mine and I could tell that mine was upgraded.

Thankyou I will check right away

Posted

Critical parts are not going to become un-availible, Joyner is a Multi nation vestment and they are being distributed all over the world except for the US, EPA and CARB approval is holding those units back at the moment, I hear that they will be back in the states soon, I hope so becuase talking to the other distributors around the world the 2011 Trooper is leaps and bounds above even where the late 3 level 2009's were. The trooper only being 2 years old, it did make vast improvements, and continues today.

Jarrad

Thankyou, I hope your right, I sure like my Trooper . seems like it was built for the terrain we have out here in BC Canada.

Posted

Jarrad is 100% correct, Joyner are huge in Europe where they have their own type of street homologation street legal Buggies and the same Buggies as you have. Joyner in the UK, Spain, Germany and Greece are well established with good turn over. A lot of people don’t realise just how big Joyner is in Russia. They are in the Middle East, Caribbean, Australia (where there is good turnover) and here in NZ, plus other small markets. The big wheel keeps on turning as does the development of all Joyner Vehicles. Parts will not become unavailable period. The North American counties are too important for Joyner not to have a presence, so hopefully they will be back soon.

Cheers Mike.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • By fishhouse3
      FOR SALE: 2021 CFMOTO ZForce 800 Trail with many extras and full warranty until 2027. Only 625 miles and 50 hours of use.
      In great condition, has a clean title and one adult owner. Has had all scheduled regular maintenance and has not been abused. Only used about six times on weekend trips to Hatfield-McCoy trails in WV.
      Under full CFMOTO Care bumper-to-bumper extended warranty until 8/2027 (paid $1,600). Full service and tune up just completed with new clutch, drive shaft, belt, rollers, etc (paid $1500). Plus it comes with over $3,500 in upgrades and accessories! Way too many included items to list here (see last pics for full details).
      This machine is ready to go and needs nothing - just hop in and hit the trails!  I have over $20k invested in this machine. Priced VERY fair to sell quick at less than half that!!!
      $9,999 WITHOUT warranty -OR- $10,999 WITH full extended warranty until 8/2027.
      Located in Chesterfield, VA 23832. Message me for more pics and info!





×
×
  • Create New...