Quantcast
Jump to content


Jamboree Site  

8 members have voted

  1. 1. Where do you want the Jamboree to be at?

    • South of Hanksville where Lenny and Kinarfi went
      6
    • Moab, no place selected as of yet
      0
    • make your own suggestion
      2
  2. 2. will you be coming

    • yes
      6
    • no
      2


Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Guest Lenny
Posted

voted! See everyone there! We will be in Marysvale before the Jamboree if anyone would like to try the Paiute.

We usually hit the Paiute Trail in August when things are hot in Hurricane. Have you always gone to the Marysvale area of the Paiute? Have you tried other areas? We've explored between Beaver and Marysvale and we are looking to meet up with family in a different area this year. Any suggestions? Have you done any of the Paiute Trails between Hwy. 89 & Hwy. 62? What about the Fish Lake area?

Before the Jamboree this year, I believe we are going to try the Burr Trail that heads east out of Boulder Town...I've heard some good things about this Backway. It should take us over to Hwy. 276 just south of the Jamboree camp site. The trails around the Box-Death Hollow Wilderness have always been of interest to Jeanne. It's west of Boulder Town / Hwy. 12 in the Dixie National Forest. Have you done this area? We may try that out too if we have time...we have driven by it way too many times without stopping.

Looking forward to seeing you and George again this year at the Jamboree!!

Lenny

Posted

We usually hit the Paiute Trail in August when things are hot in Hurricane. Have you always gone to the Marysvale area of the Paiute? Have you tried other areas? We've explored between Beaver and Marysvale and we are looking to meet up with family in a different area this year. Any suggestions? Have you done any of the Paiute Trails between Hwy. 89 & Hwy. 62? What about the Fish Lake area?

Before the Jamboree this year, I believe we are going to try the Burr Trail that heads east out of Boulder Town...I've heard some good things about this Backway. It should take us over to Hwy. 276 just south of the Jamboree camp site. The trails around the Box-Death Hollow Wilderness have always been of interest to Jeanne. It's west of Boulder Town / Hwy. 12 in the Dixie National Forest. Have you done this area? We may try that out too if we have time...we have driven by it way too many times without stopping.

Looking forward to seeing you and George again this year at the Jamboree!!

Lenny

If you can squeeze in the Burr trail, by all means, DO IT, Been there once and want to do it again. Fantastic scenery. Start at Escalante, stop and walk up to calf creek fall, and then continue on to Burr trail to the Jamboree.

Jeff

Posted

I'll need a 2xl and an xl, but I want a shirt pocket for my glasses or I'll not see you and run over you. May I suggest an artist's characterization off a green Dino with a ball cap and a YELLOW Trooper with oversized tires and extra big fenders that basically looks like mine, but definitely looks like a trooper ;):lol:B):blink: OK??????

Linda says to expect to pay $10 - $15 per shirt.

Kinarfi

Guest Lenny
Posted

I'll need a 2xl and an xl, but I want a shirt pocket for my glasses or I'll not see you and run over you. May I suggest an artist's characterization off a green Dino with a ball cap and a YELLOW Trooper with oversized tires and extra big fenders that basically looks like mine, but definitely looks like a trooper ;):lol:B):blink: OK??????

Linda says to expect to pay $10 - $15 per shirt.

Kinarfi

Maybe we can get Mopartist to do the artwork, him being an animation artist. I'd rather not have a pocket.

Lenny

Posted

Maybe we can get Mopartist to do the artwork, him being an animation artist. I'd rather not have a pocket.

Lenny

Well since sooner or later, Rocmoc :lol: is going to have to take orders, shirt pocket or not could be one the options. While mopartist is making drawings, we need a emoticon with the foot in the mouth! :lol:

Posted

I wish I could make it and meet all of the trooper legends, but it is just not in the cards for me this year. My summer is uber-packed with family events.

Posted

I wish I could make it and meet all of the trooper legends, but it is just not in the cards for me this year. My summer is uber-packed with family events.

We are sorry to hear that. We'll mix getting to meet you.

Kinarfi

Posted

Maybe we can get Mopartist to do the artwork, him being an animation artist. I'd rather not have a pocket.

Lenny

Hello Kinarfi

I was messin around with Photoshop and thought I'd give the design for the Jamboree a shot. I didn't do the lettering yet because i wasn't sure what you guys wanted. If this will work; let me know; I can set the lettering display, or make changes if you want. I did the color in light blue so that it didn't favor any particular Trooper. Yellow is kinda hard on T-shirt design as the inks don't cover very well.

-Ken

2043838290104282158ShOwhg_th.jpg Click on it for larger view

Let's have some comments, I think Mopartist has done a good job, I like the idea of not favoring any one particular Trooper, even if it's not yellow :P , may want to modify the Dinos a little bit away from Flintstones, just a comment. from kinarfi who hyjact this reply so it stay under Mopartist's post.

Posted

Hello Kinarfi

I was messin around with Photoshop and thought I'd give the design for the Jamboree a shot. I didn't do the lettering yet because i wasn't sure what you guys wanted. If this will work; let me know; I can set the lettering display, or make changes if you want. I did the color in light blue so that it didn't favor any particular Trooper. Yellow is kinda hard on T-shirt design as the inks don't cover very well.

-Ken

2043838290104282158ShOwhg_th.jpg Click on it for larger view

Let's have some comments, I think Mopartist has done a good job, I like the idea of not favoring any one particular Trooper, even if it's not yellow :P , may want to modify the Dinos a little bit away from Flintstones, just a comment. from kinarfi who hyjact this reply so it stay under Mopartist's post.

bump

Posted

Awwww....Ya don't like "Deeno" ? I could do Barney and Baby Bop maybe! :lol: (My daughters favorite from 20 years ago) Naw; just kiddin; I could do something more original. I dunno if it would be as cute as Deeno though. :)

Posted

Okay there has to be more then 7 members wanting to go.Remember as said before EVERYONE IS WELCOME,dont have to own a Trooper or a Joyner.I see the 7th person to vote has a suggestion for location.How do we find out where that might be?

Guest Lenny
Posted

If they select other, then they can submit a thread with the their selection along with the details....

Posted

put the dog collar on this and it looks just like me(LOL)

burping_dinosaur_photosculpture-p153086752031500373tro3_380.jpg

What the heck,heres the wife too...

huge_photo_sculpture_photosculpture-p153762813586112835q9gl_380.jpg

Can I get your wife's email, or cell #? I want her to see her pic!!! Or you will pay me so much a month, forever!!! ur bud? Quig

Guest Lenny
Posted

bump

Should the dinos be like sort of old like me? Can we do a caricature of the Trooper that exaggerates or distorts the essence of it to create an easily identifiable visual likeness a touch mean and sort od dangerrous for old guys to be driving? Nice work Mopartist. Thanks for the effort.

Lenny

Posted

Ya know; it's funny you said that Lenny. I was thinking for some reason that we were all so old that we revert back to age 6. Why the heck am I doing kiddy cartoons? I dunno; but I'll revamp and start over. Wierd; my hot rod artwork never appealed to little kids. :blink:

Dinerinprogresssmall.jpg?t=1302754941

post-209-0-64771200-1302754536_thumb.jpg

Posted

Ya know; it's funny you said that Lenny. I was thinking for some reason that we were all so old that we revert back to age 6. Why the heck am I doing kiddy cartoons? I dunno; but I'll revamp and start over. Wierd; my hot rod artwork never appealed to little kids. :blink:

Dinerinprogresssmall.jpg?t=1302754941

Very cool..

Posted

Can I get your wife's email, or cell #? I want her to see her pic!!! Or you will pay me so much a month, forever!!! ur bud? Quig

I dont know why she would be upset,shes wearing her make up...

Guest Lenny
Posted

That is nice work. Can I have that Shelby Cobra out front?

Lenny

Posted

I like the concept of a bunch of troopers around a central theme, maybe a big rock, a small plateau, maybe a fire. some stock some big wheels, maybe we should all take a photo of out vehicle and send it in and then caricature that, maybe even us.

May the road runner a red superbee and that's what I had.

Kinarafi

Alway wished I could draw, what talent, you're doing good.

Guest Lenny
Posted

I like the concept of a bunch of troopers around a central theme, maybe a big rock, a small plateau, maybe a fire. some stock some big wheels, maybe we should all take a photo of out vehicle and send it in and then caricature that, maybe even us.

May the road runner a red superbee and that's what I had.

Kinarafi

Alway wished I could draw, what talent, you're doing good.

I'm thinking that a bunch of Troopers would be too much for a T-shirt. You would have to be too close to see what was really in the picture.

Lenny

Guest Lenny
Posted

Hey Lenny, since you are towing with your truck, can you bring you tail gate so we can use your truck to do this? :lol:

2903413490104282158NHXBEP_th.jpg

Only if you will strip and get in it at the Jamboree.

Lenny

Posted

Ok; so I dunno much about silk screening and T-shirt prints; but if this will work; you can use it if you want. (I learned some new tricks in photoshop, and wanted to try them out.)

post-209-0-96572300-1302821631_thumb.jpg

Posted

I'll need a 2xl and an xl, but I want a shirt pocket for my glasses or I'll not see you and run over you. May I suggest an artist's characterization off a green Dino with a ball cap and a YELLOW Trooper with oversized tires and extra big fenders that basically looks like mine, but definitely looks like a trooper ;):lol:B):blink: OK??????

Linda says to expect to pay $10 - $15 per shirt.

Kinarfi

Did a little price checking and Utah has an import fee so the price to Utah residents is going to be in excess of $30 per shirt.

LOL! not really.

rocmoc n AZ/CA

Posted

Ok; so I dunno much about silk screening and T-shirt prints; but if this will work; you can use it if you want. (I learned some new tricks in photoshop, and wanted to try them out.)

Love the pic only we need a OLD dinosaur behind the steering wheel. And I love the fact the color of the Trooper is a non-factory color! Not eveyone likes YELLOW, red or whatever!

rocmoc n AZ/CA

Guest Lenny
Posted

Ok; so I dunno much about silk screening and T-shirt prints; but if this will work; you can use it if you want. (I learned some new tricks in photoshop, and wanted to try them out.)

I think we are getting closer. I like the old dino character too as Rocmoc sujested. Can we get the front tire to look a bit wider on top.

Lenny

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By JOSEPH LAMAR
      I have a 2020 axis 500 and I have replaced the TPS twice and the whole throttle body assembly once and still have code 122. I can barely drive the thing. It bucks and surges like crazy
    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • By joynersfuntillitbreaks
      so i just picked up a 2008 1100 trooper and iv ordered a few parts for it now and 99% of what i got fits perfect my issue now is my rear wheel hub is stripped out got a new cv and it fits great but i order 2 different hubs from 2 different places now and they are both wrong the spline opening is to small to fit the factory cv shaft and yes the shaft factory part #s are the same paid 250 for an original new replacement if anyone has anything that works to replace the original hub please point me in the right direction 
    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.



×
×
  • Create New...