Quantcast
Jump to content


Recommended Posts

Posted

There are 2 image areas for upload, one is your Profile Image which is on your profile page, status updates and some other areas, and the other is your Forum Avatar which shows up in topics. They are easily accessible in your account settings by dropping the arrow by your username when logged in to open the mini menu options.

To upload a Forum Avatar, you can also go to this link directly: http://www.utvboard....ers&area=avatar

Posted

There are 2 image areas for upload, one is your Profile Image which is on your profile page, status updates and some other areas, and the other is your Forum Avatar which shows up in topics. They are easily accessible in your account settings by dropping the arrow by your username when logged in to open the mini menu options.

To upload a Forum Avatar, you can also go to this link directly: http://www.utvboard....ers&area=avatar

I guess I'm doing something wrong it tells me this. The file you uploaded is too large but right under it it said this (This will scale the image down for you if it's too big in pixel size) so what's up. I'm trying to upload my Personal Photo Thanks

Posted

I guess I'm doing something wrong it tells me this. The file you uploaded is too large but right under it it said this (This will scale the image down for you if it's too big in pixel size) so what's up. I'm trying to upload my Personal Photo Thanks

The image may still be too large. The system will scale it down to fit within the site 150px X150px, but we still do not allow overzised images on upload. Please try it again as I have just increased the settings to @ 2 MB per image allowable. Just make sure the image is under 2MB in size.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By hdtran
      That's the question! Or, if you want to add details:
      (a) How do you use the UTV? (roads? off-road to get to trees? etc.)
      (b) If you are wearing a helmet--how frequently? What type of helmet?
       
      My own answers: (a) Most of the time off-road to get to downed trees, cut the trees to logs and haul the logs back for splitting. (b) Very rarely, a ski helmet and not a motorcycle helmet.
    • By sxr951
      corrosion had its oring neck area  jammed in.. and besides that had corrosion in the starter just shorted when ran direct jumper cable to the starter post power to it

    • By BernieG
      I could really use some help identifying some disconnected components on a Yard Sport YS400. The first part is this pipe, which comes out of the exhaust port area or the cylinder. It looks like it had a piece of rubber hose on it, but the hose is gone, and I have no idea what it was previously connected to.

      The second item is this vacuum valve looking thing.  Again only one line is still attached.  What is it's function and what other lines should be connected to it?

      The last thing is this hose, which exits the side top of the fuel tank (not the fuel line hose) but is not connected to anything

       
      Any help the community could provide would be greatly appreciated.  This UTV belongs to a friend, and I am trying to help him get it running correctly for his kids.
    • By The Road Hound
      Hi, 
      New to the forum. 
      Came here looking for some experienced UTV users who can enlighten me about which brand should I pick for my very first UTV or SXS. 
      I'm between 3 brands and 3 models: 
      *Kawasaki MULE PRO-FXR   1000.
      *Yamaha wolverine rmax2. 
      *Can am Commander XTP. 
      The use I'm willing to give it is mostly to go to the range with my wife, load steel targets and all our shooting gear, we shoot a lot, rifles, Shotguns and Handguns for practice, training and competition. (Range is about 10 miles from home) 
      But also I want something that I can take to the trails and have fun on dirt, mud, rocks, puddles or creeks. 
      Any objective information will be appreciated, specially which is more reliable and durable. 
      Thank you and happy 4th of July. 
       
×
×
  • Create New...