Quantcast
Jump to content


Recommended Posts

Posted

I'm in need of ramp assist for my utv trailer. I found a few, just ckg to see if anyone here knows anything about which is good,or better.Or has found & used different one. I can't lift much or bend very well, sooo, I need something to help? Wife won't lift it either!!! : )

Quig

http://www.easternmarine.com/Double-Barrel-Trailer-Gate-Assist-RA27C--0/

http://www.easternmarine.com/BUYERS-EZ-Gate-Trailer-Tailgate-Lift-Assist-5201000/

Posted

If you have one of the trailers with the heavy expanded metal ramps, it is a pain. My utility trailer has one and it is everything I can do to left it at this time. Who knows in another couple of years. I have seen people add a metal upright post with a wheel at the top. Then mount a boat wench on the side and routed thu the wheel. The wench does all the work.

rocmoc n AZ/Mexico

Posted

If you have one of the trailers with the heavy expanded metal ramps, it is a pain. My utility trailer has one and it is everything I can do to left it at this time. Who knows in another couple of years. I have seen people add a metal upright post with a wheel at the top. Then mount a boat wench on the side and routed thu the wheel. The wench does all the work.

rocmoc n AZ/Mexico

Yep, expanded metal ramp, with extra braces for weight of trooper.. Did you look at examples i attached? Looks like they would work, I hope.. Gorilla lift is good, but you buy 2 at about 190.0 each,plus shipping. these I attached were only 119.95,& shipping..

Posted

Yep, expanded metal ramp, with extra braces for weight of trooper.. Did you look at examples i attached? Looks like they would work, I hope.. Gorilla lift is good, but you buy 2 at about 190.0 each,plus shipping. these I attached were only 119.95,& shipping..

You'l love the way I fixed mine, being handicapped, it was a must, It's simple and works great and I built it my self for under $100.00, and no, it's not let the wife do it!!!! :lol:

I'll take some pictures of and post them tomorrow. I got a winch like what you pull a boat onto it's trailer and added a bar with a pulley at the top to give the winch the mechanical advantage to lift the gate. Simple, no stooping to get the ramp, worst part is the time it takes, but only compared to that of a healthy 30 year old, but I'm 60+ and have the time, not the flexibility.

PS, almost missed this request because it wasn't on the joyner page.

Posted

You'l love the way I fixed mine, being handicapped, it was a must, It's simple and works great and I built it my self for under $100.00, and no, it's not let the wife do it!!!! :lol:

I'll take some pictures of and post them tomorrow. I got a winch like what you pull a boat onto it's trailer and added a bar with a pulley at the top to give the winch the mechanical advantage to lift the gate. Simple, no stooping to get the ramp, worst part is the time it takes, but only compared to that of a healthy 30 year old, but I'm 60+ and have the time, not the flexibility.

PS, almost missed this request because it wasn't on the joyner page.

Appreciate any ideas,,

PS, sorry,put it here to get attention of maybe other "old" utv people? : ) :rolleyes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Robby
      Hello, I have a 2013 500 utv hisun. Was running ok and cut out while parked. Bike will not start now. It turns over, but won't fire. I have no spark and no fuel. I replaced fuel pump, ignition coil, spark plug, cdi, voltage rectifier and all the fuses and relays. Could bad stater cause no fuel because I can't hear the fuel pump priming. Any info on where to start looking for problem.
    • By Cory J
      Belt started slipping when I used it in high gear. It works okay in low unless I'm trying to power it up a hill and then it slips.., Ordered a new belt and went to change it and found a good bit of oil in the belt housing. Has anyone experienced this? Belt looks fine. Only have 300 miles on this thing..
    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By NC4wd
      Has anyone found a lift kit that fits an Axis 500? Mine is a 2021.
    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
×
×
  • Create New...