Quantcast
Jump to content


Recommended Posts

Posted

This afternoon (NZ time) I have decided to stop importing Joyner in New Zealand. This especially includes any spare parts and for that I feel bad for my customers over here that need them. The decision has not come lightly, but it’s one I’m forced to make. I wish the guys at Joyner USA Inc. all the best as I do all the Joyner dealers that gone through so much pain in the 18 months or so. These are good Joyner people and hope you Joyner owners will carry on supporting them. I admire them for staying loyal and hope the brand takes off again. A lot of hard work has gone into the new Joyner models, in particularly by Ken Morris. I just hope the manufactures don’t stuff it up :unsure: .

I too am very loyal to the brand, but can no longer entertain the thought doing any business with the Joyner manufactures for reasons I’ll keep to myself, for now.

Take care you guys & gals and for those going to the Jamboree have a bloody good time and stay safe.

Ka kite anō

Mike.

Posted

Well. don't know what to say? But make sure you stay in contact on forum, have enjoyed visiting with you, & appreciated your help! Please continue to visit on forum,, Hope everything else is going ok in your life,, wish you the best,, friend always,,Quig,,from Idaho

Posted

Thank you all for your kind words. It really was a painful decision but I really had no choice. I still love the Joyner brand and that’s one good reason to move on now and keep those memories.

One of the other reasons that I have come to this decision is the continuation of the earthquakes that are slowly killing our economy. Another two big ones this week feel on the same day and another 150 commercial buildings destroyed. We are witnessing the death of Christchurch and we as a nation can afford it. All that been said, that’s not the main reason I have called it quits, not even close.

It would be impossible not to continue popping into UTV Boards every day for a look and don’t worry, I’m not going to disappear from here. After all, I have to keep up my contacts to get spare parts for my Trooper. Oh the irony in that.

Cheers Mike.

Posted

silverbullet

Hi mike if you need some one to support your customers.Just send me email i can supply them with great customer service and the parts they will need for day to day use.Plus our performance parts we are set up to ship to New Zealand. I hope you give us a chance.

Thanks

Rick

Posted

Rick I have advised my customers to try Joyner Australia, only because he is the closest, but I never hear anything from him after I have sent emails. I’ve even supplied one of his customers with parts because he can’t be bothered. I really need to make sure my ex-customers are looked after as there is no way I will leave them in the lurch and will go all out to source parts for them. Thanks for your offer and will mention your name as enquiries come in. I am working on something concerning Joyner parts, so we will see how this works out.

I really feel bad for my customers and to be honest, that's probably the main reason I’ve kept going for the last six months.

Cheers Mike.

  • 2 weeks later...
Posted

This afternoon (NZ time) I have decided to stop importing Joyner in New Zealand. This especially includes any spare parts and for that I feel bad for my customers over here that need them. The decision has not come lightly, but it’s one I’m forced to make. I wish the guys at Joyner USA Inc. all the best as I do all the Joyner dealers that gone through so much pain in the 18 months or so. These are good Joyner people and hope you Joyner owners will carry on supporting them. I admire them for staying loyal and hope the brand takes off again. A lot of hard work has gone into the new Joyner models, in particularly by Ken Morris. I just hope the manufactures don’t stuff it up :unsure: .

I too am very loyal to the brand, but can no longer entertain the thought doing any business with the Joyner manufactures for reasons I’ll keep to myself, for now.

Take care you guys & gals and for those going to the Jamboree have a bloody good time and stay safe.

Ka kite anō

Mike.

Goodluck to you Mike, looking forward to see you on this forum again, I hope that everything will work out for you !!! Goodluck in what ever you do.

Stevozz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
×
×
  • Create New...