Quantcast
Jump to content


2016 cub cadet challenger efi fuel pump


Recommended Posts

  • 5 weeks later...

Not sure of what you  need,  Are you talking about the rubber sleeve on the pump?  If so I cannot help you but You might try contacting the sellers on eBay they might help you.  Sorry I shouldn't have responded.

Link to comment
Share on other sites

I am fighting a fuel pump problem.  I have changed everything, Pump , Regulator, Filter It will start run any where you want to go.  Park it turnit off and the fuel pump will not come on due to low voltage.  Any on have any ideas?

Link to comment
Share on other sites

yes Battery is good and it is charging.  Mine is a 2008 Tracker and it was funny changed pump drove it and parked it.  Next day fuel pump not working no voltage to pump.  Found a relay that no one knows any thing about shows a picture of something in the manual;, but no item number.  There is also two fuses that are no listed in the parts manual.  The maintenance manual I have for this unit has a publication of 2006.  My unit is a 2008.  Things sure changed.

I'm Sorry I said I could not help you I may have lied to you.   I have a foam rubber wrapping that came on my old pump.  The rubber is still usable if you need one.  Let me know.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Jon V
      Good afternoon. When the timing chain came off its lower gear (previous owner had over-tightened the tensioner), I ordered new parts.. chain, oil-pump chain, tensioner etc.. But now that it's time to put it back together, the main crankshaft makes a clang noise and stops when you turn it by hand. I want to solve this before assembling everything. The camshaft cover is off so that the valves aren't being activated. Should the transmission be in neutral to turn the crankshaft? The engine was running fine until the chain came off the lower gear. Then it would spin when the starter motor engaged so I assumed the crankshaft was spinning. Any advice is appreciated.
    • By LarryLarryQuiteRepairy
      Hello,
      Background: Bought a used 2012 700, added 2 small LED lights, wiring for a sprayer and changed front CV axles. 
      Had no electrical issues until recently. The old battery stopped charging so we got a new one, Rhino still wouldn't charge it.
      -Started next day, drove 15-20min, then out of nowhere the check engine light came on and temp too. 4WD started to automatically engage and disengage repeatedly. Charging display started jumping all around between 11 to 13 to 15v.
      -Relays, fuses, and battery connections seemed good.
      -Continuity on rectifier would jump btwn OL and 00.0
      -Rectifier wires from stator all read 20-21v at idle
      -Rectifier diode test had 1 bad reading. So, I replaced it with a new one (but still using original plugs) 
      Started it up, still shows no change (12.1v idle, 12.8 with some RPM)
      Also, I feel like now I maybe also smell burning plastic?
      Does anyone have experience with this problem or have a recommendation of where to go next?
    • By Robby
      Hello, I have a 2013 500 utv hisun. Was running ok and cut out while parked. Bike will not start now. It turns over, but won't fire. I have no spark and no fuel. I replaced fuel pump, ignition coil, spark plug, cdi, voltage rectifier and all the fuses and relays. Could bad stater cause no fuel because I can't hear the fuel pump priming. Any info on where to start looking for problem.
    • By MayLily
      What is the valve clearance for 2021 Hisun Axis 700 UTV?
    • By corkie
      I have  replaced the fuel pump assembly 3 times in the last 3 years. The motor always goes bad and will not come on when you turn the ignition on.  Anyone else having this problem?
      I have a Hisun utv 500.
×
×
  • Create New...