Quantcast
Jump to content


Recommended Posts

Posted

Does any have a part number for the fuel pump sock for a 2016 challenger 700 efi. Does not show on any parts diagram but the old pump has one on it.

  • 5 weeks later...
Posted

Not sure of what you  need,  Are you talking about the rubber sleeve on the pump?  If so I cannot help you but You might try contacting the sellers on eBay they might help you.  Sorry I shouldn't have responded.

Posted

I am fighting a fuel pump problem.  I have changed everything, Pump , Regulator, Filter It will start run any where you want to go.  Park it turnit off and the fuel pump will not come on due to low voltage.  Any on have any ideas?

Posted

yes Battery is good and it is charging.  Mine is a 2008 Tracker and it was funny changed pump drove it and parked it.  Next day fuel pump not working no voltage to pump.  Found a relay that no one knows any thing about shows a picture of something in the manual;, but no item number.  There is also two fuses that are no listed in the parts manual.  The maintenance manual I have for this unit has a publication of 2006.  My unit is a 2008.  Things sure changed.

I'm Sorry I said I could not help you I may have lied to you.   I have a foam rubber wrapping that came on my old pump.  The rubber is still usable if you need one.  Let me know.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Buddee
      2010 Hisun 500 - Carbed'.  She sat for about 3 weeks since last use.  Couldn't get it started.... has spark but plug was not wet.  Bought new plug, cleaned the carb, confirmed fuel pump (pulse type) is working.  Still nothing.  Put gas in the plug hole.... started right up and idled as normal and drove perfect.  Used it for the rest of the day without issue.  Tried to start again next morning.... same problem.  Poured gas in plug hole again.... started up and best kind again.
      Anyone have any insight to what's going on?
    • By JDawg
      Was using the machine all day to haul wood...no issues until the end...
      When I try to start it, the dash lights come on but starter does not...seems like no power to the starter.
      It is in park, but when I put the brake on to start, it registers N.
      Won't start in neutral either...
      Tried rocking it, did not help...
      Help...
    • By vachi
      hi everyone i have this 2021 Hisun forge 250 that won't start. no spark no fuel.   when i turn the key on i dont hear the relays click or fuel pump come on. it does have power but the relay doesnt ground the pump or the ignition coil. dont know if there are any safety switches on this model or not.  it does crank and all the accessories work. i  hot wired the pump and it does work.  i found a wiring diagram but it's very hard to figure out and was hoping someone has seen this before. all fuses are good. thanks in advance. 
    • By Jim Kessell
      2005 American Landmaster
      EH65 Subaru Robins
      spits fuel from breather hose into the air cleaner and then down into carb.  What’s causing this ??
    • eManualonline.com Save 30% OFF Sitewide, Use code: XMAS30
    • By Robby
      Hello, I have a 2013 500 utv hisun. Was running ok and cut out while parked. Bike will not start now. It turns over, but won't fire. I have no spark and no fuel. I replaced fuel pump, ignition coil, spark plug, cdi, voltage rectifier and all the fuses and relays. Could bad stater cause no fuel because I can't hear the fuel pump priming. Any info on where to start looking for problem.
×
×
  • Create New...