Quantcast
Jump to content


Sand Spider shock project

huunz

By huunz
in Joyner UTV SxS Forum

 Share

Recommended Posts

huunz Collaborator

huunz

Posted
Posted

I've been slowly working on my 650 Sand Spider, got the rear Fox AirShox in, the Weber carb, and now have started on the front Fox AirShox. The pictures are up with captions in my gallery section.

Some minor problems - the oil filter setup allows the oil to drain back to the motor when it sits for a while. This means I have low oil pressure and an oil light at startup, so I have to wait for the oil to come up before I can take off. I don't know what the long term affect will be on the engine.

Kinarfi Veteran

Kinarfi

Posted
Posted

I've been slowly working on my 650 Sand Spider, got the rear Fox AirShox in, the Weber carb, and now have started on the front Fox AirShox. The pictures are up with captions in my gallery section.

Some minor problems - the oil filter setup allows the oil to drain back to the motor when it sits for a while. This means I have low oil pressure and an oil light at startup, so I have to wait for the oil to come up before I can take off. I don't know what the long term affect will be on the engine.

oil filters are supposed to anti drain back , maybe your next filter won't do that, or maybe you should try a different brand.

huunz Collaborator

huunz

Posted
  • Author
Posted

oil filters are supposed to anti drain back , maybe your next filter won't do that, or maybe you should try a different brand.

I used Fram PH 8A filters. They have been the defacto standard for the large dual filter setups, but this is the first time I've mounted the filters higher than the crankcase. I may have to do some research into anti-drainback type filters that cross over. They did add one whole quart of capacity to the system, and i didn't have to buy a single part, it was all on the shelf. B)

I found an anti-drainback check valve in the Jeg's catalog, but it was fifty bucks, so I passed.

huunz Collaborator

huunz

Posted
  • Author
Posted

The Weber is working awesome. Starts right up, lots of power, at least relative to what it used to have, and easy to drive.

What will the cam do Silverbullet? And is it for the two cylinder 650, or the three cylinder?

huunz Collaborator

huunz

Posted
  • Author
Posted

The Wix filter might fit the stock joyner, but won't replace the Fram PH8As that are now in place. The Frams, by the way, are "anti-drainback".

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Aaron Colona
      2022 t-boss 760 oil filter
      By Aaron Colona
      Just bought a brand new 760 about a month ago. I'm at 20 hours which the book says is when you need to change the break in oil. 
       
      I must be crazy, but I can't find the oil filter. I've googled a million videos...everything seems to be 2019 or lower...and/or a 550.  They all show the filter easily seen by looking in past the rear passenger tire on the engine. There is absolutely nothing there on mine. 
       
      1.there seems to be very little info if you Google a 760, or anything Massimo newer than like 2019. 
       
      2. Does anyone have a current model year 760 that can answer my riddle for me? 
    • Karlibob
      2020 Tracker 800 sx front end noise
      By Karlibob
      I have a 2020 800 sx with about 16 hours on it.  From day one I have heard a clunking noise from the front end going over bumps.  Has anyone else experienced this?  Also this past weekend while out riding I heard a noise that sounded like the dump bed bounced three or four different times, again has anyone experienced anything like that.  Thanks, gary
    • Chile
      MSU 700 Oil Burning
      By Chile
      2018 Massimo 700 MSU. The machine started burning oil all of a sudden. One day fine-- next morning burning oil. Looking for advice. Do I pull the engine to inspect the top end or can it be done with the engine in place? Pro? Cons?
      Any and all assistance is greatly appreciated in advance.
      Chile
       
    • Ed Michael
      Older Landmaster LM 650 Fuel Problem
      By Ed Michael
      My older LM 650 is blowing fuel into the air cleaner.  Any idea on what would cause this?  It is the Suzuki motor.  Not sure what model year it is.
      Thanks
      Subaru SxS.mp4
    • Prepper
      Which is the best oil to use ?
      By Prepper
      I have been doing a little research on which engine oil is best for UTV engines.  There seems to be some disagreement over using a good quality regular engine oil, and the necessity of using "M2" (or wet clutch suitable) oil.  My understanding is the "wet clutch" suitable oil has less friction reduction properties (hence a more responsive clutch with less slippage).  While less friction reduction properties would seem to be better for the wet clutch... it would not be best for the internal engine parts like camshaft bearings and other moving parts where friction is detrimental and would lead to premature failure.  Some folks swear you need M2 oil, while others say they have been using regular motor oil for years and their clutch is just fine.  Could they both be right ???
      Any thoughts ?
       

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...