Quantcast
Jump to content


Recommended Posts

Posted

HI ALL

Started to upgrade the rear diff & when I opened it up I have broken pin that holds the Spider gears in.

Does anyone have one that they would want to sell? It would be the one with the big end and groove for the screw.

Thanks

Jeff

Posted

HI ALL

Started to upgrade the rear diff & when I opened it up I have broken pin that holds the Spider gears in.

Does anyone have one that they would want to sell? It would be the one with the big end and groove for the screw.

Thanks

Jeff

If you can't find one, let me know and you can send the broken one to me and I'll see if I can make one for you.

Lenny

Posted

Pretty sure I have one, will look in the garage tomorrow.

rocmoc n AZ

Thack Rocmoc

That would be great if you do let me know what you would want for it. It is the one with the large end.

Posted

Thack Rocmoc

That would be great if you do let me know what you would want for it. It is the one with the large end.

I have both of them. I am sending you a PM with contact info.

rocmoc n AZ

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By mcraigchr
      Howdy y'all,
      I have the service manual, but it leaves me with questions.
      1)  It is time to change the diff fluid.  The service manual says 80w-90 for the rear and Dextron 3 ATF for the front!  Is that correct?  That seems odd to me.
      2) The service manual also speaks of the need to change the transmission fluid but gives no detail about it.  What needs to happen here?
      3). The service manual also discusses changing the final drive fluid with 80-90 Hypoid.  Is the final drive actually the tranny?
      Any details about the changing of the fluid or what fluid to use ... or even other things that need to be changed that the manual does not mention would be appreciated.
      Thanks,
      Craig C.  
    • By Tejun
      Neighbor rode their Coleman with the park brake apparently not fully released. Needless to say, things got pretty hot and even started smoking and the smoke was definitely gear oil smell. Looks like oil is coming from the area just behind the disc for the park break. Looking at parts diagram, there is an oring behind the nut/washer that attaches the flange to pinion shaft. I'm not finding anything on YT that would help with disassembly. Anyone have some experience with removing rear driveshaft ?
    • By camojay
      When we first heard the noise, we immediately stopped driving it...at first we thought it might be a linkage issue, but after further inspection looks like the sound/jolting is coming from the rear diff. Took a video below...
      Anyone know what is creating the diff to skip/jump like this? We drained the diff oil and didn't look terrible, no metal.
      Other info that may be useful:
      1400 miles on it
      Recently tightened the E brake
      P.s. never posted on this forum before, let me know if the video does not work
      20240817_133539_1.mp4    
    • By Homeowner A
      Is there a better performing higher volume injector than what they come with or what is the best replacement for the original?  
×
×
  • Create New...