Quantcast
Jump to content


Oil filter crossover found!


huunz

Recommended Posts

I do not know if there is a resource on here for the US brands of oil filters, but after several trips to auto parts stores, I found the STP brand S3614 oil filter fits the Joyner 650 Sand Spider, the two-cylinder model. A Fram filter looks like it should fit, but it is just a tiny bit too long, and contacts the frame rail. The STP filter is a crossover in the books, but in actuality, it is about 1/4 inch shorter, so it will squeeze in there. This new filter let me remove the dual PH8A filters i had that took so long to get oil pressure up when I started it. There are pictures in my gallery.

But anyway, is there a resource for people who have done that kind of research to put their findings up?

Link to comment
Share on other sites

I do not know if there is a resource on here for the US brands of oil filters, but after several trips to auto parts stores, I found the STP brand S3614 oil filter fits the Joyner 650 Sand Spider, the two-cylinder model. A Fram filter looks like it should fit, but it is just a tiny bit too long, and contacts the frame rail. The STP filter is a crossover in the books, but in actuality, it is about 1/4 inch shorter, so it will squeeze in there. This new filter let me remove the dual PH8A filters i had that took so long to get oil pressure up when I started it. There are pictures in my gallery.

But anyway, is there a resource for people who have done that kind of research to put their findings up?

Go to pinned http://www.utvboard.com/topic/392-parts-pieces-and-information-for-our-troopers-joyners/page__view__findpost__p__475 and leave a reply with the info and I'll cut and paste it in. Take a look and try to match what's there, please.

Kinarfi

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Jim Kessell
      2005 American Landmaster
      EH65 Subaru Robins
      spits fuel from breather hose into the air cleaner and then down into carb.  What’s causing this ??
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By JimWil
      Looking for a place/website to order a  replacement bench seat and a dump bed fender from.
      Pics are the original orange when purchased and after painting with a textured bed liner type coating.
      Just looking for those two parts as mentioned above.
      JimWil
    • By TPlummer
      We recently purchased the Axis x550. Fueled it with 93 fuel and drove one time around the farm and the 02 fault error appeared. Any ideas? 
    • By joynersfuntillitbreaks
      so i just picked up a 2008 1100 trooper and iv ordered a few parts for it now and 99% of what i got fits perfect my issue now is my rear wheel hub is stripped out got a new cv and it fits great but i order 2 different hubs from 2 different places now and they are both wrong the spline opening is to small to fit the factory cv shaft and yes the shaft factory part #s are the same paid 250 for an original new replacement if anyone has anything that works to replace the original hub please point me in the right direction 
×
×
  • Create New...