Quantcast
Jump to content


Alpine Loop to Cascade Springs to Tibble Fork ride


Kinarfi

Recommended Posts

Went for a 66 mile ride to see the fall colors coming on and picked some Elder Berries and saw some Moose, or is it mooses? :D

2183569390104110397qOTGjA_th.jpg 2348027280104110397pjHSkn_th.jpg

Sounds like the life or Riley. Younger folks won't know what that means but us over the hill folks will remember. if it's mouse and mice then it should be Moose and miice. Let me know what you may need for that adapter. Don't have the motor mount and shaft info to know what exactly is needed.

Lenny

Link to comment
Share on other sites

Sounds like the life or Riley. Younger folks won't know what that means but us over the hill folks will remember. if it's mouse and mice then it should be Moose and miice. Let me know what you may need for that adapter. Don't have the motor mount and shaft info to know what exactly is needed.

Lenny

I'll get you some measurements and such

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By BernieG
      I could really use some help identifying some disconnected components on a Yard Sport YS400. The first part is this pipe, which comes out of the exhaust port area or the cylinder. It looks like it had a piece of rubber hose on it, but the hose is gone, and I have no idea what it was previously connected to.

      The second item is this vacuum valve looking thing.  Again only one line is still attached.  What is it's function and what other lines should be connected to it?

      The last thing is this hose, which exits the side top of the fuel tank (not the fuel line hose) but is not connected to anything

       
      Any help the community could provide would be greatly appreciated.  This UTV belongs to a friend, and I am trying to help him get it running correctly for his kids.
    • By NicholasNWM09
      Hello Everyone,
      COOL NEW Product Alert! 
      A company called NEW Wire Marine or NEW Wire has Badass custom panels for UTV, Buggy/Hunting trucks. From Fully wired switch panels with laser etched rockers with backlights in 5 different colors, to just parts like voltmeters, phone, USB and 12 v chargers. Rockers can be printed, or custom laser etched rockers and they even have sleek labeled pushbuttons. They are a first-class company with a great knowledgeable staff and outstanding customer service. Switches are based on 12v or 24v circuits and they also have marine grade wire and connectors, which is perfect for waterproofing your system!
      Go check them out!
      Check out the websites : https://newwiremarine.com/ and https://rockerswitchpros.com
       
       
       
       
    • By NicholasNWM09
      Hello Everyone, COOL NEW Product Alert! A company called NEW Wire Marine or NEW Wire has Badass custom panels for UTV, Buggy/Hunting trucks. From Fully wired switch panels with laser etched rockers with backlights in 5 different colors, to just parts like voltmeters, phone, USB and 12 v chargers. Rockers can be printed, or custom laser etched rockers and they even have sleek labeled pushbuttons. They are a first-class company with a great knowledgeable staff and outstanding customer service. Switches are based on 12v or 24v circuits and they also have marine grade wire and connectors, which is perfect for waterproofing your system! Go check them out!!!Honda - xxxx - UTV Pioneer - xx'.pdf
    • By moto mutts
      Ahoy there, me hearties!
       
      Set yer sights on the grand spectacle known as the Shiver Me Timber SXS Fun Run! Cast yer lot with the crew of UTV Offroad Adventures as we embark on a daring escapade to seek both booty and trails in the Moabi Regional Park. This be where the Colorado River flows, a mere 11 leagues southeast of Needles, California. So don yer finest eye patches and make way with your trusty parrot!
       
      Behold, UTV Offroad Adventures proudly presents the legendary Shiver Me Timber SXS Fun Run! 'Tis an event that would make even the bravest buccaneers quiver with excitement! Aye, this three-day revelry promises a safe and organized escapade like no other. Venture forth and uncover hidden treasures aplenty as ye navigate your off-road vessel along waterfront trails, through shifting sand dunes, ancient bridges, and tunnels of yore. Come Friday night, there'll be a ride spanning a hearty 15 nautical miles. On both Saturday and Sunday, ye shall have the privilege to choose from two separate rides, ranging betwixt 50 to 90 nautical miles. And fear not, for the festivities shall include feasts, campfires, quick-draw poker, raffles, and an abundance of merriment, laughter, and revelry. This be an affair for sailors of all ages and UTV backgrounds. Join us in the quick-draw poker rounds, where every piece of eight we gather goes to aid local charities.
       
      Our epic off-road voyage shall commence from none other than Pirate Cove Resort. Nestled amidst the swaying palms and embraced by pristine, sun-kissed beaches along the Colorado River, all of this be situated upon the storied path of Historic Route 66. 'Tis an oasis where RV encampments and cabin rentals await, alongside UTV rentals and more treasures than ye can fathom.
       
      For those wielding mobile devices: For full event particulars, the location chart, the course itinerary, and to enlist yer name among the crew, set yer sights upon the Menu option above, arrr!
       
      Go to www.utvoffroadadventures.com for all the info

    • By lozomex
      After a few days of heavy rainfall I got in my Sidekick and noticed that the belt seemed to be slipping as I was making my way out on a large property.  I turned around and could barely make it back to my shop.  After removing the cowelling I noticed about a quart of water drained out.  I dried the area, the cover and checked the belt.  No signs of dammage, belt looks great and no foreign debris other than water in the area.  I put it back together and there was a definite improvement.  The Sidekick is driveable now but the belt still slips but only at a higher speed and only when the throttle is punched.  I'm wondering whether I may have inadvertently damaged it while it was wet and have ordered a new belt.  I have looked on line to see if there is a guide or procedure, specifically for the CVT belt removal and replacement for the 850 but can find none.  Does anyone have experience with this?
×
×
  • Create New...