Quantcast
Jump to content


Recommended Posts

Posted

New to Joyner and this forum. I need info on oil filters, spark plugs, air filters etc. Also a schedule of maintance for my unit. Any and all help will be appreciated.

Thanks in advance!

Smitty

Posted

New to Joyner and this forum. I need info on oil filters, spark plugs, air filters etc. Also a schedule of maintance for my unit. Any and all help will be appreciated.

Thanks in advance!

Smitty

Welcome Smitty,glad you found your way here.

Posted

Welcome. Where are you generally located? Maybe you could make it to one of our Jamborees. You sure are welcome to attend. One upcoming in the Spring of 2012.

Dealer & Supplier info can be found at http://www.utvboard.com/topic/1732-reliable-dealer-network/

rocmoc n AZ

What I would like to find is a replacement size oil filter, Fram,Wix etc.

Also spark plugs and air filter.

Again this for a 800 cc engine in the renegade.

For the next 6 months I will be in Benson Arizona.

Thanks,

Smitty

Posted

Did you read through the pinned parts and pieces thread? it's main for troopers, but isn't the renegade the same for the most part with a 3 cylinder instead of 4?

Yeah, see if they both use the same stock plug. At least maybe the plug design is the same but colder or hotter. Then you could adjust a replacement from the list for the Trooper. Good suggestion Kinarfi !

rocmoc n AZ

Posted

New to Joyner and this forum. I need info on oil filters, spark plugs, air filters etc. Also a schedule of maintance for my unit. Any and all help will be appreciated.

Thanks in advance!

Smitty

I have a 2008 Joyner Renegade R2 and have a couple of parts that I have found that work. Maybe they could be put on the list for replacement parts.

Front wheel bearing kit is a Moose Racing through a parts unlimited dealer 0215-0076 retail 32.95 fits Artic Cat but I have used these in my Renegade comes with bearing and seals for 1 wheel.

Differential axle seal 35x55x8 double lip found on ebay 10 for $35

Oil filter Fram ph3593a

If anyone needs a new alternator but dont want to pay $180 for a Joyner brand. I used 14971 $100 from autozone and fabricated a braket from some old joyner brake pads and a longer belt 4pk0800. Works good. It has a 3 wire plug but just used the 2 wires from original with spade connectors.

I also have some Can-am commander lower ball joints on order. They measured close on the vehicle but I will get back to you on that.

The spark plugs are the same as trooper I used the NGK iridium plugs but don't have that written down.

Posted

I have a 2008 Joyner Renegade R2 and have a couple of parts that I have found that work. Maybe they could be put on the list for replacement parts.

Front wheel bearing kit is a Moose Racing through a parts unlimited dealer 0215-0076 retail 32.95 fits Artic Cat but I have used these in my Renegade comes with bearing and seals for 1 wheel.

Differential axle seal 35x55x8 double lip found on ebay 10 for $35

Oil filter Fram ph3593a

If anyone needs a new alternator but dont want to pay $180 for a Joyner brand. I used 14971 $100 from autozone and fabricated a braket from some old joyner brake pads and a longer belt 4pk0800. Works good. It has a 3 wire plug but just used the 2 wires from original with spade connectors.

I also have some Can-am commander lower ball joints on order. They measured close on the vehicle but I will get back to you on that.

The spark plugs are the same as trooper I used the NGK iridium plugs but don't have that written down.

Great info, keep it coming.Thank you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Cory J
      Belt started slipping when I used it in high gear. It works okay in low unless I'm trying to power it up a hill and then it slips.., Ordered a new belt and went to change it and found a good bit of oil in the belt housing. Has anyone experienced this? Belt looks fine. Only have 300 miles on this thing..
    • By Jim Kessell
      2005 American Landmaster
      EH65 Subaru Robins
      spits fuel from breather hose into the air cleaner and then down into carb.  What’s causing this ??
    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By JOSEPH LAMAR
      I have a 2020 axis 500 and I have replaced the TPS twice and the whole throttle body assembly once and still have code 122. I can barely drive the thing. It bucks and surges like crazy
    • By Texjpr
      2002 ranger 500 4x4 stopped running and wouldn't restart. Service manual wiring diagram helped identify the hub safety switch as the culprit. Using jumper wires to bypass  switch allowed the engine to start and run normally. Inspection of switch showed melted epoxy and a strong smell of burnt electrical. Unable to find replacement part either used or new. Is there a work around other than jumper wiring?
×
×
  • Create New...