Quantcast
Jump to content


Mud guards

DevilDog

By DevilDog
in Joyner UTV SxS Forum

 Share

Recommended Posts

Kinarfi Veteran

Kinarfi

Posted
Posted

Took a ride this AM at Bull Dog Canyone. a few pictures of Superstition Mountains, need mud guards what have you all come up with?

Looks like a good place to ride and see the sites, fenders, I broke one of the front fenders on an aspen tree, and since they were to small any way, I replaced them with several different things and settled on these made out of a roll of plastic, they may not be the most elegant, but they DO keep the mud off, and more importantly when driving where the cattle or sheep have been, they keep the poop off too!!! Now all that gets to me is the splashing if I'm going too fast. If you like, l'll take some more detailed photos.

2231115420104110397PqnQKL_th.jpg

2634717080104110397plqGJt_th.jpg

Here's some photos of gumballs fenders, 2726299500104282158VhyKzw_th.jpg

Kinarfi

Link to comment
Share on other sites
dirtydog Contributor

dirtydog

Posted
Posted

Took a ride this AM at Bull Dog Canyone. a few pictures of Superstition Mountains, need mud guards what have you all come up with?

Hi DevilDog.

I did similar fix as Gumball. Here's the source I got somewhere on this forum for plastic.

http://www.speedwaymotors.com/Colored-Plastic-Rolls,1557.html EDIT BY Kinarfi, That's where I got my Plastic Also

Rain is good for AZ and fun for us! Let the mud fly!!

Dirtydog in Phx

Link to comment
Share on other sites
Guest Lenny

Guest Lenny

Posted
Posted

I used 1/8" thick conveyor belting I found on Ebay. It has reinforcing fibre mats in it's construction which gives it some structural integerity so it doesn't sag easily. Mine hold their shape really well. I recently changed my front fenders, extended then, so I get some pictures to show what I did.

Lenny

Link to comment
Share on other sites
dirtydog Contributor

dirtydog

Posted
Posted

Hey DirtyDog - Lets get together and go riding.

I'm up for that when I get this thing done. Doing wheel brgs, broke my fuel sender and modding my rear rack. Can you post pics of your spare tire mount? Should be finished by end of this week. Where can we meet? I live near Cave Creek.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Kingfish
      Now that I have done the LI-Ion batt conversion, I need to do something about the suspension
      By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • Ridge Runner
      2019 Coleman 550 Outfitter, need help accessing tail gate latch screws
      By Ridge Runner
      Hi
      i have a 2019 Coleman 550 Outfitter.  The tail gate has a pin on each side, that snaps into latch blocks that are mounted on the inside of the tail gate opening.  There are two M6x16 pan head screws(bolts?) that hold the latch blocks in place.  The screws enter from inside the bed body, and I can’t figure out how to access them.  This is right by the tail light assemblies.  I tried taking a pan head screw out of the fender lip, but found out there is not a nut firmly inplace, to hold the pan head screw in.  Bottom line I’m making it worse.  
      coleman was no help.  If I could figure out how they attached the tail light, then maybe I could put the latch screws in through the tail light hole.  Any ideas?
       
      thanks
      Ridgerunner
    • Paul Angstadt
      Hi y'all. New to this stuff. in Florida.
      By Paul Angstadt
      Hi everybody. I just bought a 2012 Hisun with the 700cc engine. Was wondering where i could find a service manual for this thing?
      Its going to need some parts that are missing, like the air intake hoses and other things. Also the dash display is out. the only light that works is neutral light. Not even sure on the model. from pics I've seen, it looks like an HS700. Kind of grey with the black stripes on the hood. Just hoping i can find parts for it.
      Thank you for any advice you can give me. By the way, it does run and goes forward and reverse.
      Paul
    • Venom
      American Sportworks Bull Dog 300 BD300 Restoration
      By Venom
      Hi All,
      I picked up an old beat up 2010 American Sportworks Bull Dog 300 BD300.  I would like to restore her...  Does anyone know a good source for parts other than the OEM?  I find $130 for brake pads is kind of unreasonable... I also need a steering rack and other things... I took apart the steering rack and it needs a new bearing and oil seal... Of course the OEM only sells the complete rack for over $200..  I found the correct bearing for $6.00. I am having trouble finding the correct oil seal.. 
      Anyone that has info on one of these machines, please chime in...  I am used to the ease of finding info on Polaris, Honda, Can Am, Kawasaki, etc.....,  Info and parts on these seems to be scarce..  Some of the parts on it look like Golf Cart parts as well as some look like Go Kart parts..
       

    • diamondjfarm
      Good mornin' all. Just joined.
      By diamondjfarm
      I got an old 2003 Arctic Cat 375 Auto, and just bought a 2008 AC 650 side by side. Got a new starter, solenoid, and battery for the 650. Gonna change the crankcase oil and filter while I'm at it.
      Anything I oughta watch out for from them that's done the starter/solenoid on this model?
      Don't have a manual yet for the 650. Any recommendations for oil weight/grade?
      Thanks.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...