Quantcast
Jump to content


upgraded brakes

ERV JR

By ERV JR
in Joyner UTV SxS Forum

 Share

Recommended Posts

ERV JR Collaborator

ERV JR

Posted
Posted

I saw something on here and also on a youtube video about upgraded brakes . I have an 09 trooper , are the upgraded brakes for the early models or for all, also was it a campaign with parts provided for free ?

2scoops Proficient

2scoops

Posted
Posted

I saw something on here and also on a youtube video about upgraded brakes . I have an 09 trooper , are the upgraded brakes for the early models or for all, also was it a campaign with parts provided for free ?

You should have the "upgraded" brakes on the 2009. Early 2008's had smaller rotors. The brakes still stink though. I upgraded my front calipers with brembo dual pistons with some improvement. Lenny has had the most success. He added an extra caliper in front. My next step will be to go to smaller master cylinders and try that. We have a automotive size master cylinders pushing ATV size brakes (too much volme, not enough pressure).

Rocmoc was going to switch his brake lines around so they are not criss-crossing, but I haven't heard if he has done that yet or the results.

Guest Lenny

Guest Lenny

Posted
Posted

You should have the "upgraded" brakes on the 2009. Early 2008's had smaller rotors. The brakes still stink though. I upgraded my front calipers with brembo dual pistons with some improvement. Lenny has had the most success. He added an extra caliper in front. My next step will be to go to smaller master cylinders and try that. We have a automotive size master cylinders pushing ATV size brakes (too much volme, not enough pressure).

Rocmoc was going to switch his brake lines around so they are not criss-crossing, but I haven't heard if he has done that yet or the results.

I have my brakelines switched, 2 fronts on one master and 2 rear on the other. works good. I guess with the stock setup that if you were in 4x4 full lock out and one master cylinder went bad, you would still have brakes on all 4 wheels and you wouldn't be in 4x4 full lock unless you were trying to climb steep (or in mud) so this would make some sense. Switching the brakes would eliminate this marginal advantage plus 2 brakes won't stop it anyway. I have my parking brake on the driveshaft so I do have all 4 wheels braking if I'm in 4x4. Even if both of my masters go out, I still have good braking. Two calipers on each wheel is fairly easy and gives a lot better braking.

See the "Joyner Trooper dragging brakes" post for pictures of my brake setup.

2961515900104928832uTsJVT_th.jpg Edit by Kinarfi

Lenny

Guest Lenny

Guest Lenny

Posted
Posted

what is the bore dia in the stock master ?

The brake master is .625"

Lenny

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • CYJSP2009
      Joyner parts
      By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • Bobbers
      Axis 500 parts
      By Bobbers
      My wife accidentally ran the Axis 500 into a fence and tore the front end up (broke her arm too). Just wondering where the best place to get front end parts? I know she busted the knuckle but haven’t jacked it up yet. Thanks guys for any help!
    • strike250
      Free Massimo Buck 400 service manual
      By strike250
      I have the factory service manual available for the Buck 400. Just send me a message with your email and I'll get it to you. Although there is no charge for this, it would be great if  you would visit my website where you could donate any amount to help do things like this with others who need it. Again, there is no charge for this manual, and no obligation to donate. But if you did, I would thank you for sure. Have fun on the trails. www.warriorsoffroad.com
       
      Matt

    • lincolnsq175
      Are there any performance parts for ut400?
      By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
    • Alien10
      Coleman (or Hisun) Parts and Service experiences.
      By Alien10
      Maybe members can post where they have obtained parts and service for their Hisun produced UTVs and ATVs, including the Coleman lines.  Maybe post the model you have, what you bought,  and how the products were quality wise.  Also if you had any shop service done, where (city & state) and how it worked out for you.   
       

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...