parts for massimo, hisun,etc in florida?

[sxr951]

parts for massimo, hisun,etc in florida? where can i get parts for the massimo 700.. like bolts and console i  didnt see any bolts on amazon to go with cylinders and any thing when rebuilding a 700 engine 

[Jack Angel]

I've had to obtain parts through Massimomotors.com. They are in Texas. Some parts will come right away from them, while others come from shipped from overseas. I was able to get a few things off Amazon. I couldn't find anything locally that they wouldn't have to order, so I did it myself.

[Greg Kilgore]

Shouldn't double post.

 

Take bolt to a good hardware store. Use the nut/bolt thread guild they usually have. Match up the bolt. Don't try and force it in the tool.

 

Maybe www. Motor Cycle doctor .com may be able to help.

[sxr951]

LOL.. your funny.. just go to a hardware store..lol  
 these bolts as i found out (after wasting alot of time at ace and calling bike shops) are "proprietary parts" which in this case means they have a runoff of odd threads or diameter or both . so you have to buy your integral parts from massimo. 

which is fine just wish i knew before .
 i'll prob drill out one bolt hole of its stainless insert and run a HELICOIL to 3/8 x 125 stainless bolt

[Greg Kilgore]

Glad you found the bolts/studs/information you need.

May want to share the diameter and thread pitch with the rest of the community. In case someone else needs the info.

Stainless is fun to drill.

Personally, I wouldn't call Ace a good hardware store.

[Dale Stansbery]

  On 8/9/2024 at 2:35 PM, sxr951 said:

parts for massimo, hisun,etc in florida? where can i get parts for the massimo 700.. like bolts and console i  didnt see any bolts on amazon to go with cylinders and any thing when rebuilding a 700 engine 

Expand  

Did you take a look at the parts diagram?...https://alpha-sports.com/massimo_parts.htm?q=massimo-parts  I suppose there may be a unique situation that only a 1 off bolt or screw may work, but everything I see on the parts diagrams are standard metric bolts. They are after all trying to minimize costs, and creating unique hardware hardly seems productive.

[Dale Stansbery]

Bolt M9x109, for instance this head bolt is available at Motorcycle Doctor.

[sxr951]

  On 8/10/2024 at 4:10 AM, Dale Stansbery said:

Did you take a look at the parts diagram?...https://alpha-sports.com/massimo_parts.htm?q=massimo-parts  I suppose there may be a unique situation that only a 1 off bolt or screw may work, but everything I see on the parts diagrams are standard metric bolts. They are after all trying to minimize costs, and creating unique hardware hardly seems productive.

Expand  

1...wow!! GOOD FIND! THX HEAPS! even has bolt thickness .to bad their all wrong..lol.
2....i got 8.07 mm  however i have two diff  10mm from ace and one will slide thru the head guide holes to the cylinder and one will not ,to thick.  . if i decide to tap  the cylinder block hole  out
3... more later thanks much

[sxr951]

after i cleaned her up with baking soda blast the one pic can see where the head gasket was burnt thru leaking radiator water into the cylinder when i bought it from freak-a-zoids hill billys

[rtate1050]

How about ARP fasteners . They have about anything that you might need . Also , try Summit Racing. Either one will go out of their way to help you to get what you need.

[sxr951]

is msu 700 same as a masimo 660?  or where would parts microfiche? be for a 660?

 

[sxr951]

[Greg Kilgore]

  On 8/10/2024 at 3:01 PM, sxr951 said:

1...wow!! GOOD FIND! THX HEAPS! even has bolt thickness .to bad their all wrong..lol.
 

Expand  

Ya know, for someone that came here looking for help and information on how to repair their machine and locate parts. THEN spit in the face of people trying to help. Isn't a very friendly thing to do.

 

I couldn't give 2 shits if you fix this POS now.

Sincerely 

An Eastern Kentucky HILLBILLY.

[klm]

does sound like kind of an asshole don't he.

[Joe Breaux]

I had first thought of suggesting to him a heli-coil to use a different bolt but didn't want to be accused of redneck Bubba repair

[Greg Kilgore]

  On 8/19/2024 at 5:43 PM, Joe Breaux said:

 redneck Bubba repair

Expand  

I resemble that remark. 

😂 😂