Quantcast
Jump to content


Trooper 1100 Turbo Kit?


goindeep

Recommended Posts

Hey guys,

so i have built my own turbo kit in house and it works awesome! seeing these turbo kits for sale for 3 and 4k seemed a little steep for me..

i built my entire kit intercooled and all for less then half of that price so i am considering selling these kits.. if i could produce a complete bolt on kit that could be installed with simple hand tools in your garage strait for $1800 and intercooled for $2500 would any of you be inerested? i would like to post pics but not sure how to? i have also snorkled my trooper and not just the air filter but diff vents, the two chrome catch cans (crankcase vent and radiator vent) along with raising the ECM and fuse boxes to head level.. this as well could be sold as a kitfor very little cost. i can also do the work in-house if needed (install all of this for you) for only a couple of hundred... is this stuff you guys would be interested in? Turbo kits will be complete al the way down to an Autometer Vac/Boost guage, fuel controller etc.... i have seen a HUGE increse in power! if you have more questions you can call me at 713-824-8891 i'm in the Houston Texas area.

Also Lenny would you mind calling me so i could pic your brain for a min? some questions about this site (how to post pics, stetting up my profile etc.) as well as a few other things.

Thanks i love this forum and really look foward to helping in the future! and really like seeing extreme joyners on the trail!

Link to comment
Share on other sites

well the project took a lot of fabrication but done once now it would be pretty easy to duplicate.. if someone can tell me how to post pics on here i will.. it looks really good and turns a lot of heads, especially when they hear the blow off valve! have a few people here in Houston i am already building them for so i figured i would keep going... and rocmoc i would agree! it would help a lot in the mud too! maybe that will be my next project....

Link to comment
Share on other sites

its close to the same as that one beside using what i would call a better turbo and components... mine would be one off built for your specs.. but honestly they do have a nice kit.. feel free to call me and i can go over everything with you as well as send you pics. i am not trying to get rich over this, i just really like the Joyner and love disproving their bad wrap! mine is a serious head turner and i would like to see more like it! i would put mine against any Ranger RZR and leav'em behind!

Link to comment
Share on other sites

Guest Lenny

If I remember correctly, the turbo lkit on Ebay shows 120hp. I'm not convinced that it can produce that much unless he is boosting more than 10psi and running preformance fuel. Without changing engine compression or running special fuels, that kind of boost will create problems with pre-ignition which is bad for an engine. Also without matching the ports and going to a larger throttle body, the engine is still somewhat choked off. I've done all these things along with opening up the head ports for better laminar air flow. I am also using an after market ECU so I can tune all parts of the air fuel ratio, VE and ignition tables for best preformance plus I'm running 26 pound inectors and a high voltage ignition. I'm getting 121hp on 91 octane pump gas. The only way you will really know what the power output is, is to see a dyno test, printed out chart,.of the build. Silverbullets build will be interesting because he is bettering the crank, rods and pistons so he can probably run the engine to 8 or 9 thousand rpms which will greatly increase the potential power possibilities. I knew I wouldn't have the fastest Trooper for long. Who knows what is out there, I may not have the fastest anyway.

Lenny

Link to comment
Share on other sites

  • 3 weeks later...
  • 6 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • By Browner010
      Recently I had an overheating issue on my 2022 Coleman Outfitter 550 (Hisun UT550) and to check to make sure it was fixed I took it out for a ride around the block. After a couple cycles on the LED coolant meter, I took it for a couple mile ride and on my way back I heard a loud metallic snap then a grinding noise. It was still able to move under its own power but very slowly. I was about 2 blocks from the truck so 'I limped it home and up onto the trailer. I know I need to tear it apart and look for what broke, but anyone have a guess as to where to start? I'm seriously getting tired of this damn machine! 750 miles on it and already replaced the belt, wet clutch, primary clutch, clutch roller weights among a few other things. Seriously, this friggin machine has spent more time on the lift than on the road. I thought I bought this new because it was from the owner of a tractor supply, but he registered it under the stores name making me the 2nd owner voiding any and all warranties.
      Any Ideas what to look for would be appreciated.
      Thanks
    • By REDfletching
      Spent today at a Honda dealership looking at their 520 side by side, then on the way home past our Lowes noticed they had several new UTVs on site, so we U-turned and ducked in there. We were impressed that all that came for $9,999 metal whole length skid plate, nice sized bed, roof, windshield, side mirrors, winch, upgrade looking tires… all of which would have added thousands of dollars to an already expensive Honda 520. Now Honda does have a great reputation from my trusted UTV experienced buddy, so it has that going for it.
    • By Paul Angstadt
      Hi everybody. I just bought a 2012 Hisun with the 700cc engine. Was wondering where i could find a service manual for this thing?
      Its going to need some parts that are missing, like the air intake hoses and other things. Also the dash display is out. the only light that works is neutral light. Not even sure on the model. from pics I've seen, it looks like an HS700. Kind of grey with the black stripes on the hood. Just hoping i can find parts for it.
      Thank you for any advice you can give me. By the way, it does run and goes forward and reverse.
      Paul
×
×
  • Create New...