Quantcast
Jump to content


After Jamboree wil be in UT


Recommended Posts

Guest Lenny
Posted

Coral Pink Sand Dunes State Park. There are a lot of really good trails there and great sand dunes. Rocmoc, if you stop by the first of May, we'll go over there and play on some of it. We would need about 3 days to see all of the variation. Kinarfi, you and Linda may like to join us. Besides I have an oscillscope.for you. Anyone else that wants to welcome to come along. State Park camping rates are only about $18 a night wit5h drive thru sites. Dry camping is also available a few miles down the road each way.

Lenny

  • Replies 33
  • Created
  • Last Reply

Top Posters In This Topic

Posted

I have reserved space 14 in this campground, http://www.reserveamerica.com/camping/map_of_Coral_Pink_Sand_Dunes_State_Park/r/campgroundMap.do?page=map&search=site&contractCode=UT&parkId=345131&topTabIndex=CampingSpot for May 4, 5 & 6. Will depart the morning of the 7th for home. There is a dry camping area before you get to the campground as you enter the park. At $56 for 3 nights I would save a small amount running the gen while dry camping and I like the quiet of NO GEN. There are other sites open for now but if you are going and want to be in the campground, don't wait. The Cancellation Fee is $13 if cancelled 4 days before the reservation date so not much at risk.

rocmoc n AZ/Mexico

Posted

I'm making plans to be there, I'll be coming down 89 past Mount Carmel, so Rocmoc's in space 14, I'll probably go for the dry camping and plan to be there on the night of 5/3 or early afternoon on the 4th.

kinarfi

Posted

Note, I don't think the campground has power. Just, water, shower, dump & paved sites so no sand in the MH. Everything but power. SO disregard my costing a little more.

rocmoc n AZ/Mexico

Posted
Note, I don't think the campground has power. Just, water, shower, dump & paved sites so no sand in the MH. Everything but power. SO disregard my costing a little more. rocmoc n AZ/Mexico

What are you saying? are you going to be in the 14 a night park or the free BLM with me and maybe others?

Posted

For now I have a reservation. Lenny is going to check out the dry camping & campground this weekend. Will decide after we compare info and decide. Watched two youtube videos, dry camping & campground locations. I like the campground but not if it requires daily fee to enter in addition to the campground fee. Will firm up after Lenny visit this weekend.

rocmoc n AZ/Mexico

Posted

Grrrr, the proximity is in the realm of possibility for me, but I have to work that weekend...one day. I will be in Moab on memorial weekend if anyone will be there let me know.

Posted

What a terrible life you guys are now living.You no longer have the joy of working 10-12 hours a day.Nothing better to do then visit different areas to get out in the great outdoors and go on trail rides..What a pity....Does that sound like its coming from someone envious??? YOU BET IT IS..... :angry::D

Guest Lenny
Posted

Thankx Ricksrb, Your right, being retired is nice. I learned something about retirement. When I was younger and still trying to come up with enough money to retire, the money I thought I needed was way too much. Ultimately I ended up with a lot less money then I once had but it doesn't matter. I'm by no means rich but I do have enough to get along on ok. I've always lived not needing much. As long as I have my shop and a toy or two I'm happy. I don't even own a car, just a pickup truck. I found out that retirement wasn't about money anyway but about time. Just being able to do what I want everyday is worth far more then the couple of million I once had. If I would have known that I only needed this much money to be happy, I would have retired a long time sooner.

Looking forward to the rest of you guys and gals joining us.

Lenny

Posted

Thankx Ricksrb, Your right, being retired is nice. I learned something about retirement. When I was younger and still trying to come up with enough money to retire, the money I thought I needed was way too much. Ultimately I ended up with a lot less money then I once had but it doesn't matter. I'm by no means rich but I do have enough to get along on ok. I've always lived not needing much. As long as I have my shop and a toy or two I'm happy. I don't even own a car, just a pickup truck. I found out that retirement wasn't about money anyway but about time. Just being able to do what I want everyday is worth far more then the couple of million I once had. If I would have known that I only needed this much money to be happy, I would have retired a long time sooner.

Looking forward to the rest of you guys and gals joining us.

Lenny

Same here,wont have much when the time comes.Just hope we can be in the same situation you are in,enough to get by and enjoy a few things.Just hope you guys arent tired of this recreation by the time we retire.You guys just go on enjoying yourselves and feeding us little bits and pieces of your adventures to keep us going.

Guest Lenny
Posted

Hey, l was building off road vehicles when I in high school. Not likely I'll get sick of it before I die. Just got away from it for along time trying to make enough to retire and now have finally gotten back to it.

Lenny

Posted

Called the park this morning. The Camping fee for using the campground includes the fee to enter the developed part of the park. There is NO FEE for using the rest of the park. So; if camped at the dry lake/ dry camping, NO FEES. But if you want to use the showeres or dump site, there will be a fee. I looked at GoogleEarth and the Dry Camping is at one end of the park and the Campground is in the middle.

Lenny & Kinarfi, if you BOTH decide to dry camp I will also. I will cancel my reservation and eat the $13 or save $43. Either way is a win as we will be THERE!!!!!!! Just let me know.

BUT I will have to find a place to dump my tanks as I will have been on the road for a few day by the time I reach Lenny's.

rocmoc n AZ/Mexico

Posted

I was always too busy as a kid getting in trouble and breaking stuff. My older brother is a great mechanic because of it... LOL.. Now I have the time to learn how to fix it after I break it....

Just need to convince wife to spend $$$ on a shop..... So I can quit working outside....

Posted

Called the park this morning. The Camping fee for using the campground includes the fee to enter the developed part of the park. There is NO FEE for using the rest of the park. So; if camped at the dry lake/ dry camping, NO FEES. But if you want to use the showeres or dump site, there will be a fee. I looked at GoogleEarth and the Dry Camping is at one end of the park and the Campground is in the middle.

Lenny & Kinarfi, if you BOTH decide to dry camp I will also. I will cancel my reservation and eat the $13 or save $43. Either way is a win as we will be THERE!!!!!!! Just let me know.

BUT I will have to find a place to dump my tanks as I will have been on the road for a few day by the time I reach Lenny's.

rocmoc n AZ/Mexico

Not sure which way you would be coming from but if heading north on the 15 through Mesquite Nv there is/was a rv park on the main drag we stoped at some years back and for a fee we dumped.Sorry but cant remember the name.Thats not too far from lenny.

Posted

Thanks Rick but I will be coming from Eloy, NV on the backroads of Nevada. Coming from the WEST. There is always somewhere! Lenny has a fish pond!

rocmoc n AZ/Mexico

Posted

I was always too busy as a kid getting in trouble and breaking stuff. My older brother is a great mechanic because of it... LOL.. Now I have the time to learn how to fix it after I break it....

Just need to convince wife to spend $$$ on a shop..... So I can quit working outside....

Isn't it always Sunny and Calm in LV? AND when it gets too hot, a night light under the stars!

rocmoc n AZ/Mexico

Guest Lenny
Posted

There is a place to dump just before you get to my house. It's ust off interstate 15, north of St George. Take exit 16 (state hwy 9 which leads to my house), go about 1/4 mile east and it's the first gas station on the left. You will need to get off to the right and go under hwy 9 to get to it. Dump site is in the rear. You can just help yourself.

Lenny

Posted

Thanks Rick but I will be coming from Eloy, NV on the backroads of Nevada. Coming from the WEST. There is always somewhere! Lenny has a fish pond!

rocmoc n AZ/Mexico

Is that Ely? Why not like in that chevy chase movie,the criswolds christmas i think.His brother in-law parked in the drive and in the middle of night dumping out in the gutter in front of his house..eeeeewwww...

  • 3 weeks later...
Posted

Will be there Friday a week from now, May 4th. Lenny is going to show up for at least a day if his Trooper is not repaired. Will be in the Campground IF Lenny is not able to repair his beast and is not there for the entire weekend.

rocmoc n AZ/Mexico

Guest Lenny
Posted

So far so good. Main frame damage is repaired. Can repair the shock by stealing a shaft from a pair of Fox shocks I have that will go on my truck. Need to shorten the Fox truck shocks anyway so this will work fine for me. I'm not going to worry about the new clutch if I don't get it in time. Current clutch should get me buy. I see Mike and Rochell in the sand rail and Jeff and I in my Trooper for the dunes. Then for the trails, I see Jeff and LInda in Jeffs Trooper and MIke and I in my Trooper. This makes everything sort of work. What do you think? Don't think Jeffs Trooper will do the dunes good. Getting into them is a bit of a steep climb and he may not make. He can try it though and if that works then all the wives can ride the dunes. I'll run paddles in the dunes and switch out to my regular tires for the trails. Jeanne said she would be more then happy to spend the time visiting with Linda and Rochelle. Unless I run into an unforseen problem, Jeanne and I plan on being there.

Lenny

Posted

Sounds good, we will all be at the driy camp location Friday. We won't get there unil late afternoon as we are stopping to tour some Caverns Fri AM. If we can get to the caverns early enough Thursday to catch the last tour we will be earlier to the dunes.

We love caverns!

rocmoc n AZ/Mexcio

Posted

I'll be there too. I may surprise you as to how my rig handles the sand. Let some air out of the tires, and I do good, and I know you have air for blowing them back up.

Since Lenny sounds like a go, we'll see you at the dry camp.

Kinarfi

Guest Lenny
Posted

Letting air out can make a big differance. I'll run as low as 4 psi on the front and 6 on the rear for sand.

Lenny

Posted

Going to be FUN. Perfect weather, high of 86 daytime and low 60's at night. Anyone else going to make it? This is a possible location for next year's Jamboree!

rocmoc n AZ/Mexico

Posted

We are here! This place is one of a kind with the closest other being Coos Bay, OR. There is lots of area here to beyond running in the dunes so first take is it would make a great Jamboree location. Lenny, Kinarfi and myself have made the trek. The area is Beautiful & quiet. Will unload in the AM and make our first run!

rocmoc n AZ/Mexico

Posted

First the GOOD!

The area is in total SUPER. We played some in the sand and rode a 24+ mile loop. The loop had an ending that matches most any ride or area. Lenny did great in the sand, will let him give details & Kinarfi did better than either Lenny or myself expected. Sand is red with plant life ranging from cactus to trees. The sand is the really soft and pulls every HP out of an engine.

The Bad,

I was worried about the elevation change for my sand rail. It is setup for sea level and we are over 6,000 ft. No matter how much I adjusted the carb, removed the baffle and removed the spark arrester, I could not get the engine to perform. Just too large of jets for the elevation.

Everyone played in the sand for a while until I quit as I was not going to hurt the engine for the sake of a little more fun. We came back to camp, had lunch and went out on the loop. I rode first with Lenny and finished the loop with Kinarfi. It is a great trail with sand, fast sections, slow techy section, slick rock, elevation change & VIEWS. If not for the Hanksville, Ut jamboree, I would say the best.

Don't like being a passenger so we are headed home in the AM but we will be returning.

rocmoc n AZ/Mexico

Guest Lenny
Posted

Had great fun at Coral Pink Sand Dunes area. Decided that my big paddle tires are just too much for the T2 with the power I'm producing. It goes really good in the dunes but puts too much stress on the drive train. As a result, I damaged my front differential by blowing out the 4 wheel drive engagement mechanism. Decided to sell the paddles and stay on the trails instead. I like the trails best anyway and with my 31" regular tires I do really good in the dunes anyway, just not as good. As a result, put my regular tires back on and did the trail riding in 2 wheel drive. That worked out fine except in one spot that was a long nasty and sandy climb up from a river crossing. Even though I only had 2 wheel drive, I did get up it with a bit of help from Kinarfi. The trails we rode when Rocmoc was there were good trails with lots of variety from fast straights to tight twisty turns to rocky steeper climbs and great senery. I did manage to flatten a tire on our first trail ride. Even though i patched it, it still slow leaked through out the rest of the riding forcing us to stop now and then to air it back up. The second ride with Kinarfi was equally good with also a good variety of ups and downs, turns and fast stuff along with even better senery. This ride was 6 hours from start to finish covering 53 miles which gives you an idea of the speed we were able to maintain. Kinarfi did the third ride with him and his wife alone as I was sick of fussing with the flattening tire. I'll let him describe that ride and tell you about the trail that turned him back because it went just down and down. Not sometyhing to do when out alone. Can't wait to get back there again. There are many many trails that we have never ridden yet.

Great trip with good people. Kinarfi had remembered his camera so maybe he will post pics.

Lenny

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • By Ridge Runner
      Hi
      i have a 2019 Coleman 550 Outfitter.  The tail gate has a pin on each side, that snaps into latch blocks that are mounted on the inside of the tail gate opening.  There are two M6x16 pan head screws(bolts?) that hold the latch blocks in place.  The screws enter from inside the bed body, and I can’t figure out how to access them.  This is right by the tail light assemblies.  I tried taking a pan head screw out of the fender lip, but found out there is not a nut firmly inplace, to hold the pan head screw in.  Bottom line I’m making it worse.  
      coleman was no help.  If I could figure out how they attached the tail light, then maybe I could put the latch screws in through the tail light hole.  Any ideas?
       
      thanks
      Ridgerunner



×
×
  • Create New...