Quantcast
Jump to content


Recommended Posts

Posted

Hey guys I just purchased a 2010/11 Joyner t4. I have 200 miles on it and have been hearing a rattle in the front end. I've looked all up under the front and can't find anything that looks like a culprit. I was wondering if anyone else has had this problem or suggestions.

Sean

Posted

Should be the Steering Rack. Grab the tie rod from the rack to the wheel and jerk it up and down. If that is it, Lenny on this site has a kit to fix the rack. If not, take a look at the shocks.

rocmoc n AZ/Mexico

Guest Lenny
Posted

Make sure all the bolts are tight. The Chineese assemblers don't always get um tight.

Lenny

Posted

Found that out the hard way. My rear seat came loose last night and damn near fell out. So I've checked every bolt that buggy has to offer.

Posted

Lenny if you get this my tie rods do have a slight rattle too, I would greatly appreciate it if you could show me how to repair that and/or sell me the mod that rococo told me about.

Thanks one again for the help!

Sean

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By KimAC
      I need a pair of front shocks for a Landpride Treker 4200NT, from 2005?  Does anyone know of a good salvage yard - or another source?
      The old shocks have "SEBAC 11685 12 3" stamped on them (or something very close - it's hard to read). I think SEBAC are (were?) an Italian company.
      Is there a compatible shock I can use? I don't have easy access to a scrap yard where I can compare shocks etc.
      Thanks,
      -Kim
    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
×
×
  • Create New...