Quantcast
Jump to content


New intake for Trooper

silverbullet

By silverbullet
in Joyner UTV SxS Forum

 Share

Recommended Posts

silverbullet Experienced

silverbullet

Posted
Posted

Silverbullet

We are going to make a new intake manifold for Trooper.It will be designed to make low end torque.

We are going to make it with internal cooling rods.We have a fab.guy on the payrole so things will get done faster.Will work with supercharger or Turbocharger or stock motor.The cooling rods will be inside intake it will not interfere with airflow.We are going to test temp with and without cooling tubes.

nocturnalsixer Rising Star

nocturnalsixer

Posted
Posted

I'm sorry if I missed the info in other post but I think it's not there. I am wondering about the intake manifold you are working on,

Will it be in stock position or would it be flipped upright like some of the members on the forum had done with their stock manifold by flipping it over.

So would your intake manifold be designed to fit like stock or in flipped upside down position or both or what?

Thanks

Brandon

Merchant Mariner Enthusiast

Merchant Mariner

Posted
Posted

I'm sorry if I missed the info in other post but I think it's not there. I am wondering about the intake manifold you are working on,

Will it be in stock position or would it be flipped upright like some of the members on the forum had done with their stock manifold by flipping it over.

So would your intake manifold be designed to fit like stock or in flipped upside down position or both or what?

Thanks

Brandon

I'm also curious about this. Will it be flipped our standard?

silverbullet Experienced

silverbullet

Posted
  • Author
Posted

Silverbullet.

R&D still working on the designe.What ever works is what we build.Want it to work on Supercharged or stock motors.Should add a 20 to 30 percent more H/P.We are hard working on it to get it right.Built with cooling system in side of manifould.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • FTG-05
      Want a new work UTV; who and what should I look for?
      By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • Greg Kilgore
      2021 Axis 500 Head Bolt Torque specs
      By Greg Kilgore
      Got a 2021 Axis 500.
      I'm needing the head bolt torque specs.
      Manual states 38nm.
      But saw a video Hisun put out on YT for a 550 stating 50nm + 45° turn of wrench. Didn't think they would be that much difference on a 500 and a 550.
      Seen another YT video on a 2013 500. He did 38nm.
      Really only want to do this job once and done. And done correct.
      Anybody got the answer?
      Going to start this rebuild in a few once this weather brakes. Flooding and then snow and cold here now. But spring is around the corner and the wife has to have this fixed or a Honda pioneer may be parked in driveway soon. She has to be able to ride.
       
    • SpaceGhost
      New guy with new (to me) machine
      By SpaceGhost
      As with any forum you join, there is a requirement for an obligatory introduction... and that seems fair. How else do you get that first post in there without jumping in with some stupid question right out of nowhere?

      Hi. I'm Space Ghost. Well, not really, but that was my call sign on my last deployment before an IED made me non-deployable, and I an now retired/disabled, and living on my wonderful VA disability. I did almost 28 years in total between the Army, Army Reserve, and National Guard. 1 deployment with the Reserve (Desert Storm) and 3 with the Guard (1 pre, and 2 post 9/11)

      Married (going on 30 years) one of each. (both out of the nest)
       
      Just picked up my first side by side a couple days ago. A 2020 Can-Am Defender HD10 DPS 6x6. 

       
      It's in pretty good shape, but as you can probably tell, it's sitting a bit high. Former owner put a lifting collar on the shocks. 

       
      The good = almost 17" of ground clearance. (30" tires) 
      The bad = incredibly steep driveline angles, and a pretty stiff ride. 
       
      They will be coming off. 
       
      Other than that... clean as a pin and appears very well maintained. 
       
      Looking forward to seeing what this forum can bring, and hoping I can bring something in return. 
    • CRV
      Hello .. I have a 2007 cub cadet big country
      By CRV
      I’m need a couple parts. Diff. Lock Actuator mainly. But I would like to find a donor that maybe has bad motor or something along those lines. 
      if anyone has or knows of anything please holler at me 
      thanks Randy 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...