Quantcast
Jump to content


Recommended Posts

Posted

Looking to get into a UTV, having said that I have been doing some research on the trooper. Have many questions already answered, but need the reassurance. I am a firm believer in you get what you pay for, but you can buy a lemon every day of the week.....from anyone. The looks of the trooper are eye catching, the motor sounds like it has potential. The lockers don't sound very good nor does the diff's. Are these a capable 4X4 or do they belong in the desert with the buggy's. Is the manual tranny worth it, or do you wish you had a low gear in the transfer case for bigger rubber. I am not into going 100 miles an hour. How nimble are they in the bush? I like my hunting in the great white north.....as in Canada:)

This is what i am thinking of.

T2 trooper, new cam grind for torque, tuner, 31" silver backs, clutch upgrade.... to start with.

My knowledge of mechanics is moderate and I do enjoy my garage. So I am not worried about have to maintain this machine as all of them need TLC.

Would like honest answers and no salesman crap. :) Let me know what you all think.

Posted

They are a good buggy but they need help with a few things I use mine in Canada like a swamp donkey drive the hell out of it you will be surprised what they go threw I run 30 inch XXl and don't think I would go any bigger for mud I would do diff upgrade no matter what year it is it will be better the lockers are good but need to be adjusted properly all wiring and fues need dielectric grease and move rad up on the bed or it will heat snorkel it for a start make sure the safety stuff was dune then read all posts they are easy to work on if you don't mind doing it and the super atv power steering is a must

Guest Lenny
Posted

Ther lockers and the diffs are fine provided they are set up correctly. That requires upgrading them. I run 121 HP thru my diffs and so far have not had any issues. I even once was burried about 12 inches in the sand, at a sand dune with 16x15 rear and 13x15 front paddle tires. The 16 and the 13 are the width of the tires in inches and the tires are 33" tall. I had to rev the engine to about 3500 rpms, in order to get the wheels to spin. I was in low gear and with both diffs locked. That is an awful lot of stress but the strain was't enough to brake the diff or the lockers. When set up they seem to be pretty darn strong. However you are right in that there are things that need to be addressed but the Trooper will for the most part out preform the competition except for maybe the wildcat. With the work i have done to mine, I'm fairly confident that I can beat one fairly easily but I have a substantial amount of mods on mine. I wouldn't trade it for a new Wildcat, maybe two of them and then the mod work would start all over again.

Lenny

Posted

Mine still stock with the diff up grade and I run General Grabber AT2 27x8.50 R14 95Q 6PR OWL $90.10 http://ssl.delti.com.../GRABBERAT2.jpg and do mostly mountain trails, it handles nicely in the bush and the trails and the hills and the sand, very capable machine,IMHO # 1, snorkel & really good air filter - save the engine, #2 diff upgrade, #3 power steering #4 tires, your choice. #5 gas & go have fun!!!

Posted

That is the info that I am looking for, thanks! Is there a big difference in years with these machines (one to stay away from, other than the 1st 50)? There is an '09 close by with low km's that i would like to have a look at. Wondering if there is anything i should keep an eye out for with the safety concerns everybody has with these machines? Is there much out there for suspension uprgades, or are you guy's fabbing up most things? How are the cab enclosures built for these machines with the glass up front?

Sorry for all the questions, but my search is limited and i have gone through the first 10pages already trying to dig up info. Thanks for all your input, i appreciate it!

Posted

Noblet,

Not sure where you are located, but I have a 2009 Trooper T2 for sale. I have attached some pics from my gallary under wyofun. Just throwing it out there. I am selling because i have not found the time to enjoy. I put 200 miles on it and it has 650 miles on it now.

It has been a fun great machine and definately turns heads.

Thanks,

wyofun

post-1553-0-17048400-1336062152_thumb.jpg

post-1553-0-39423200-1336062168_thumb.jpg

post-1553-0-56188000-1336062243_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Jim Kessell
      2005 American Landmaster
      EH65 Subaru Robins
      spits fuel from breather hose into the air cleaner and then down into carb.  What’s causing this ??
    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • By Polish DIY Lover
      Hi i'm jakub and i making DIY UTV. Some questions?
    • By shawn b
      my hisun died on me while driving it started losing power then stalled. it wants to start but wont . it didn't over heat. I replaced plug,fuel filter injector, and fuel pump.put code reader on it and says no codes. have any ideas possibly sensor? Any input on what it could be would be appreciated
×
×
  • Create New...