Quantcast
Jump to content


Silverbullet Trooper Build

silverbullet
 Share

Recommended Posts

silverbullet Experienced

silverbullet

Posted
Posted

well we have finally started tear down on our new shop project vehicle sent to us from Utah. we will be posting pictures and tutorials as we go. for now motors is getting machined to be able to take a set of our 9.0-1 compression pistons with the teflon coating on the skirts

post-339-0-12603200-1336085416_thumb.jpg

  • Like 1
huunz Collaborator

huunz

Posted
Posted

Are these similar to the pistons for the 650?

Will you be lightening the motor as you work on it? I've found a ton of excess casting bungs and holes for the engine to go into the original car application.

silverbullet Experienced

silverbullet

Posted
  • Author
Posted

no lightening or smoothing of the motor on this build, as far as pistons all of our forged pistons are from the same manufacturer so they do have some resemblances. we will have more pictures soon we are waiting on machine work to be done

  • 3 weeks later...
silverbullet Experienced

silverbullet

Posted
  • Author
Posted

its coming along had a little wait in machining just because there were so many people trying to get stuff done for the long weekend.

we are waiting on the rods,pistons, and crank to come back from cryogenic freezing.

cryogenic freezing is the process in which the parts are submerged into a -300* environment for undisclosed periods of time making the molecules "relax" and ultimately resulting in a virtually stress free rod and crank.

this assembly will dissipate heat 30% more efficiently, and it will take much more abuse.

cams should be back this week.

we should have some pictures up of the final assembly by the end of the week.

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • FTG-05
      Want a new work UTV; who and what should I look for?
      By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • Homeowner A
      Hisun Coleman UTV repair shop DFW TX?
      By Homeowner A
      Could someone please recommend a reputable shop to troubleshoot and repair a Coleman UT 400 in the DFW TX area?  
    • SpaceGhost
      New guy with new (to me) machine
      By SpaceGhost
      As with any forum you join, there is a requirement for an obligatory introduction... and that seems fair. How else do you get that first post in there without jumping in with some stupid question right out of nowhere?

      Hi. I'm Space Ghost. Well, not really, but that was my call sign on my last deployment before an IED made me non-deployable, and I an now retired/disabled, and living on my wonderful VA disability. I did almost 28 years in total between the Army, Army Reserve, and National Guard. 1 deployment with the Reserve (Desert Storm) and 3 with the Guard (1 pre, and 2 post 9/11)

      Married (going on 30 years) one of each. (both out of the nest)
       
      Just picked up my first side by side a couple days ago. A 2020 Can-Am Defender HD10 DPS 6x6. 

       
      It's in pretty good shape, but as you can probably tell, it's sitting a bit high. Former owner put a lifting collar on the shocks. 

       
      The good = almost 17" of ground clearance. (30" tires) 
      The bad = incredibly steep driveline angles, and a pretty stiff ride. 
       
      They will be coming off. 
       
      Other than that... clean as a pin and appears very well maintained. 
       
      Looking forward to seeing what this forum can bring, and hoping I can bring something in return. 
    • CRV
      Hello .. I have a 2007 cub cadet big country
      By CRV
      I’m need a couple parts. Diff. Lock Actuator mainly. But I would like to find a donor that maybe has bad motor or something along those lines. 
      if anyone has or knows of anything please holler at me 
      thanks Randy 
    • CSM_Retired
      Kioti Daedong K9 2400 Shop Manual
      By CSM_Retired
      View File Kioti Daedong K9 2400 Shop Manual
      This manual is to provide servicing personnel with information on the general speci- fications, service, operating principle, troubleshooting, exploded view including part name, removing and installing procedures for K9 2400/K9 2440 UTV (Utility Vehicle) with high-end technology.
      All information in this manual is based on the latest product information available at the time of publication. Therefore, some of the information in this manual may differ from the machine you have.
      KIOTI has a principle to apply update to the next edition of the manual if there is any. However, KIOTI has no obligation to modify the contents in this manual, especially the contents in the manual which is already distributed or published.
      The modified information is available in KIOTI's online electronic manual system (DEMSS).
      This manual is ultimately to satisfy customers with best performance of this UTV. If there is any typo, wrong information or question for this manual, feel free to contact KIOTI.
      Submitter CSM_Retired Submitted 01/02/2025 Category KIOTI  

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...