Quantcast
Jump to content


Recommended Posts

Posted

Been researching on buying the new 2012 trooper and after reading some forums and not feeling warm and fuzzy about it. Anyone have suggestions on these yet? I know they have made many great changes on these units but parts is what concerns me......

Posted

Parts for these vehicles have started to cone into the states consistently from axles to diffs which by the way came down a couple hundred in price..to anything else you may need..and as always we have aftermarket mods for you if you're a go fast guy

Posted

Thanks, what web sites are available to research some after market parts to go fast, and winshields tops ect. Also I haven't seen any forums for the 2012 models yet.

Posted

We had one in the shop a month ago drove a lot smoother due to a suspension upgrade they come with also felt torquier than the straight header model of the past..the new one is a cast iron manifold and dual cats with a muffler..I guess the back pressure helps low end but does seem to die down a bit faster up top..new 2012s come bare no light bars winch and other little options older models had but that can easily be added..they have manual 4wd from the factory also

Posted

Good, those are some of things I have noticed as well. The I will be purchasing has the light bab, spare tire and 3500# winch for $11,300 which is a white one, the white looks little better than some of the choices. Thanks

Posted

Good, those are some of things I have noticed as well. The I will be purchasing has the light bab, spare tire and 3500# winch for $11,300 which is a white one, the white looks little better than some of the choices. Thanks

Nater,

Fill in your profile so we know where your located. Might help with pricing that way. Have seen 2012 going for as low as $8,900.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By Bobbers
      My wife accidentally ran the Axis 500 into a fence and tore the front end up (broke her arm too). Just wondering where the best place to get front end parts? I know she busted the knuckle but haven’t jacked it up yet. Thanks guys for any help!
    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By rdborra
      I had to remove the relay for the dump bed due to it popping the fuse for main key power. I have tried to find a short but nothing seems to out of normal. I also disconnected the dump motor and switch and still pops the fuse. Also, when the machine is warmed up i get about 5 to 10 of work out of before it stalls. Once I can get it to start again I have to use the choke to keep it running. 
    • By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
×
×
  • Create New...