Quantcast
Jump to content


Recommended Posts

Posted

hey guys I know theres a lot of info on here about shocks whats been done what worked, suspension mods and so on. I wanna upgrade my shocks soon some Im doing some research and looking at price. Im considering radflo shocks and if im correct it seems like on the forum a 2.0 with 8 inch of travel is a good idea. What I wanna do is basically get a shock that I can put in the stock location and I was thinking id go with an extra inch of travel to be safe. so what SIZE would you guys recomend that being said. I have read the info here on this site and I would do a crazy shock setup but I do not have the fabricating skills and there is only one shop in my area that could help and his price is insane

thank u charlie

Posted

Going an inch longer is OK as long as you are able to compress to the required length. If you don't you will bottom out on the shock and lose travel.

rocmoc n AZ/Mexico

Posted

I have a 6 inch up front and 8 inch in the rear. Both are in stock mounting brackets. The fronts are right at the cv bind at full extension but dont quite bind. The rears have to have limit straps or the axels will rub right before full extension. Not as nice a setup as the other guys. But works for me.

Posted

thanx Rocmoc and Banjo I assume your talking 6" travel in the front and 8" travel in the rear right????? Ya I saw some guys have some real nice work done on here with suspension but lack of fabricating skills and not a deep enough pocket to pay for it I gotta comprmise

charlie

Posted

I have a 6 inch up front and 8 inch in the rear. Both are in stock mounting brackets. The fronts are right at the cv bind at full extension but dont quite bind. The rears have to have limit straps or the axels will rub right before full extension. Not as nice a setup as the other guys. But works for me.

What did you put up front?

Posted

I used the Fox 2.0 coilovers with reservoirs. The 6 inch bolts in the front just right, but you may need to use a limit strap there just in case. The 8 inch bolts in the rear, but it exteneds a little too far so a limit strap is a must there. The 6 inch is a single spring and the 8 inch is a 2 spring.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By KimAC
      I need a pair of front shocks for a Landpride Treker 4200NT, from 2005?  Does anyone know of a good salvage yard - or another source?
      The old shocks have "SEBAC 11685 12 3" stamped on them (or something very close - it's hard to read). I think SEBAC are (were?) an Italian company.
      Is there a compatible shock I can use? I don't have easy access to a scrap yard where I can compare shocks etc.
      Thanks,
      -Kim
    • By JSwearer
      Does anyone have any suggestions for aftermarket shocks.  I have a T-Boss 550 and took it riding in some rough trails and the stock suspension was uncomfortably rough.
      Thanks
    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • By REDfletching
      Spent today at a Honda dealership looking at their 520 side by side, then on the way home past our Lowes noticed they had several new UTVs on site, so we U-turned and ducked in there. We were impressed that all that came for $9,999 metal whole length skid plate, nice sized bed, roof, windshield, side mirrors, winch, upgrade looking tires… all of which would have added thousands of dollars to an already expensive Honda 520. Now Honda does have a great reputation from my trusted UTV experienced buddy, so it has that going for it.
×
×
  • Create New...