Quantcast
Jump to content


Eastern jamboree????


charlie

Recommended Posts

Ok guys us eastern riders need to get together. I ride with a guy with an rzr two custom golf carts and lots of quads. I'd like to meet and see some other Joyner people and buggies! I went to north strafford nh a few weeks ago with a large group and it was great 120 miles of trails and the views were great! We are planning on a trip next yr to jericho state park nh . It will be toward the end of June they have a big mud run there and obstacle course. The festival is two days my group is going to do atleast 3 nights 4 days. From my house in ply ma it's 5 hrs there's no camp grounds at the park but there is all over town! Here's the good part you have to register with nh 38 for a mounth pass but once u are registered you can drive your Joyner quad or whatever right threw town meaning Dunkin doughnuts gas pizza or whatever!

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...

not sure if anyone will be into this but heres some more info. Jericho fest is july 27-28 its a friday and sat in Berlin Nh there is 375 acres and lots of trails wits a utv and quad fest with competions and just general riding. I dont think there is a a fee for watching but there is for competing. You have to reg in the state of NH mounth pass is 38$ or a yr is 75$, need vin # color make model cc of vehicle there is plenty of campgrounds and a few hotels close by once you are regiestered with NH you can drive you vehicle threw town gas sations resturants and so on. Cederpond campground looks the best so far and the price is resonable. I am planning on going up the 25 that eveing or early on the 26th wich is a thurs and then leaving that sunday or monday

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • By Ridge Runner
      Hi
      i have a 2019 Coleman 550 Outfitter.  The tail gate has a pin on each side, that snaps into latch blocks that are mounted on the inside of the tail gate opening.  There are two M6x16 pan head screws(bolts?) that hold the latch blocks in place.  The screws enter from inside the bed body, and I can’t figure out how to access them.  This is right by the tail light assemblies.  I tried taking a pan head screw out of the fender lip, but found out there is not a nut firmly inplace, to hold the pan head screw in.  Bottom line I’m making it worse.  
      coleman was no help.  If I could figure out how they attached the tail light, then maybe I could put the latch screws in through the tail light hole.  Any ideas?
       
      thanks
      Ridgerunner
    • By MISTERTIRE66
      Recently inherited 08 joyner renegade r4 800.. seems to be sound mechanically but I cannot find bal joints. Any pone help with other replacement part number please.
    • By Mater Help
      I have a 2019 Bennche Warrior that I mostly use around my property for odd jobs. I also cruise the neighborhood and make short runs to the local pub and neighbors houses. The exhaust system is super loud. I was hoping to find something that will fit and work that is quieter. I have included a photo of the system that is on the unit now. Any ideas or recommendations? 
      Second question: Recently, it has become hard to shift from park to any gear if the engine is running. The shifter moves fine if the engine is off. It is almost as if the clutch (no pedal) is not disengaging completely. I have not tried to do anything to correct the condition yet but as it gets increasingly more difficult, I need to do something.  Looking for a place to start. Nothing in the service manual that I can find. 
      Any help will be greatly appreciated,
       
       

    • By sxr951
      2015 massimo 700.. need cylinder bolt!  it some special cut from factory,, its a 125 thread but its like between 8 and 10 mm  dont know where to find any ideas? thx
×
×
  • Create New...