Quantcast
Jump to content
This Topic


Desert Bloom Rally February 14-17, 2013

factory25

By factory25
in UTV Events and Rallies

 Share

Recommended Posts

factory25 Rookie

factory25

Posted
Posted

Five 2 Productions is very excited to announce the Desert Bloom in Quartzsite, AZ February 14-17 brought to you by Sanderson Ford. Come enjoy some of the best trails in the southwest while participating in raffles, poker runs, manufacturers midway, drive in movies, dinner cruise and so much more. To register or more information go to www.desertbloomrally.com. Fun for the whole family, don’t miss out!

post-1656-0-75837100-1346701242_thumb.jpg

  • Like 1
  • 2 weeks later...
factory25 Rookie

factory25

Posted
  • Author
Posted

Rally Update!!! I just got off the phone with Erin at Turn 2 Productions and they have jumped on board with the Desert Bloom Rally in full force and will be on hand filming all four days of the rally. They will then edit the footage into a wonderful DVD featuring the stars of the show, the rally participants. It will be a great way to relive the wonderful event and show your friends what they missed. The DVD will be free for the first 50 vehicles to sign up. Thank you Turn 2 Productions!!!

rocmoc Grand Master

rocmoc

Posted
Posted

This is going to be a great event. There is every type of terrain and lots of area to boondock/dry camp in. Wish we could make it but we are already commited. We have to make our plans a year plus out as we have too many demands for our time.

rocmoc n AZ/Mexico

factory25 Rookie

factory25

Posted
  • Author
Posted

Joyner USA at the DBR?!?!?!? That would be huge news. How can we make that happen? We had 3 of those bad boys at the first edition of the rally. We want the tradition to continue. How can we help?

BuggieDude Contributor

BuggieDude

Posted
Posted

We are discussing our Event Calendar for 2013 this month, I will be in contact as soon as I know. Thank you for the enthusiastic response, we are hoping to show the consumers that Joyner USA is here to stay, and we are just as excited to be there.

factory25 Rookie

factory25

Posted
  • Author
Posted

Dude,

Please email me at jason@five2productions.com and we can discuss some options with the DBR. We have an amazing ride-and-drive area set up and plenty of room to set up a large indoor or outdoor display. We can do a customer appreciation promotion or anything else you may want or need. My cell number is 623.570.0474. Thank you.

  • 2 months later...
factory25 Rookie

factory25

Posted
  • Author
Posted

We at Five 2 Productions hope everyone had a great Thanksgiving! It will be the blink of an eye and Christmas will be here. Now that the weather is perfect, we have begun to run trails for the DBR. Here is some video from our last trip. See you in February!!!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • ToughLuck
      2021 Massimo MXU 1000 Runs Rich
      By ToughLuck
      I have a 2021 Massimo MXU 1000.  Last winter the front drive shaft sheared off inside the motor and it was cheaper to buy a new motor than to take it apart in order to remove the front drive shaft that was broken inside the case…
      Now it is running rich, seems to maybe be geared too high, does not accelerate well once you hit about 28mph.  I’ve replaced the O2 sensor.  MAF is next (I accidentally ordered the wrong one, but when I removed the old one you can clearly smell fuel).  
       I’m not a motorhead but I can turn a wrench.  Any ideas how to get this motor optimized?  The motor has about 300 miles on it.  I broke it in as recommended in the manual. 
    • CapnWalleye
      2016 Hisun 500 runs rough no power
      By CapnWalleye
      Just picked up a Hisun 500 that had shift issues (corroded fan gear) which I fixed. It also didn't seem to be running smoothly then all of a sudden it got worse. It seems to miss on both idle and when pushing the gas pedal to the floor and doesn't seem to be running at full power. I've been working with a local person who is walking me through some steps, but I'd like some input from this group as well. What I've done:
      - drained the fuel tank and replaced it with 93 octane fuel and added heet to help with any water problems.
      - replaced the fuel injector.
      - disconnected the battery (several times) to allow the module to reset.
      - set the valve clearance, both intake and exhaust, within specs ... intake was tight but exhaust seemed fine.
      - replaced the battery.
      - replaced the O2 sensor.
      Nothing has helped. Not sure what the next steps are, but would appreciate any expertise that can be offered here.
       
    • CapnWalleye
      2016 Cub Cadet 500 runs rough
      By CapnWalleye
      Just picked up a Cub Cadet 500 that had shift issues (corroded fan gear) which I fixed. It also didn't seem to be running smoothly then all of a sudden it got worse. It seems to miss on both idle and when pushing the gas pedal to the floor and doesn't seem to be running at full power. I've been working with a local person who is walking me through some steps, but I'd like some input from this group as well. What I've done:
      - drained the fuel tank and replaced it with 93 octane fuel and added heet to help with any water problems.
      - replaced the fuel injector.
      - disconnected the battery (several times) to allow the module to reset.
      - set the valve clearance, both intake and exhaust, within specs ... intake was tight but exhaust seemed fine.
      - replaced the battery.
      - replaced the O2 sensor.
      Nothing has helped. Not sure what the next steps are, but would appreciate any expertise that can be offered here.
       
    • CRV
      Need some help. Looking for some parts too
      By CRV
      Howdy new member here . My hobby's Rabbit dogs , gamefowl . I'm retired from my real job but I stay busy with the hounds and gamefowl . So to help around the farm I ran across an old 2007 CC Big Country 4x2 to haul feed , water , sprayer and my sorry a$$ .It is in pretty good shape , 781 hrs. good plastic , tires, ect. . But as anything outside and 18 years old it needs seats ! The thing I have found wrong mechically the Diff. Lock Acturtor is broken where it mounts to the bracket ( partly why Im here ) . Hoping someone here can help  ! Just my wish list but Id like to find a roll cage and a composit/plastic top for it Im thinking I'll need a donor to salvage these things from ( again partly why Im here ) .Is there another brand that uses this same actuator? If anyone reads this and has or knows of any of threse parts PLEASE HOLLER !! 
      Again Howdy brothers & sisters

    • hetovi
      Best UTV Windshield for Extreme Conditions
      By hetovi
      Hey everyone,
      I’m in the market for a UTV windshield that can withstand extreme conditions, including high winds, dust, and off-road impacts.
      I’ve seen a lot of options out there, but I’m unsure which one will provide the best protection and durability.
      Does anyone have experience with windshields that excel in these environments? Are there specific brands or materials you recommend?
      I’m particularly interested in options that offer both durability and clarity.
      Any tips or personal experiences would be greatly appreciated!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...