Quantcast
Jump to content


Miles

charlie

By charlie
in Joyner UTV SxS Forum

 Share

Recommended Posts

charlie Experienced

charlie

Posted
Posted

Hey everyone I'm just curious what year troopers are out there and how many miles u have on them when did u start seeing big issues and I don't mean wheel bearings and such! I mean motors tranny frame cracks so on

nocturnalsixer Rising Star

nocturnalsixer

Posted
Posted
Hey everyone I'm just curious what year troopers are out there and how many miles u have on them when did u start seeing big issues and I don't mean wheel bearings and such! I mean motors tranny frame cracks so on

Mine is 09 with roughly 2000 miles on it...i have broke a rear swing arm,

1200 miles the fusebox went bad and kept blowing fuse to ecm.

Now 2000 miles...both my front wheels toe out especially badly on passenger side when steering wheel is straight passenger side wheel points out and away from trooper. I haven't looked into why that's happening.

I haven't gone under the trooper to look for any cracks since it's pretty much coated with dirt and mud and gravel dust under the trooper lol *knocks on wood*

Sent from my DROID RAZR using Tapatalk 2

nocturnalsixer Rising Star

nocturnalsixer

Posted
Posted
2500 miles mines 09 no major problems yet. dedub. turbo going on as we speak.

I want/NEED turbo but funds don't don't allow for that right now, the outlaw 2 are 50 lb each and i can't drive in 4th gear that well or get past 45/50 mph

Sent from my DROID RAZR using Tapatalk 2

dedub Collaborator

dedub

Posted
Posted

Nice!!!!! How was the power was the acceleration what u thought it be

yes lot more torque. not much on big in thats i went with small charger spin up quick. i've not got on big hill yet.
nocturnalsixer Rising Star

nocturnalsixer

Posted
Posted
yes lot more torque. not much on big in thats i went with small charger spin up quick. i've not got on big hill yet.

Really i thought 7psi would be good boost with extra power....what size turbo are you using?

Sent from my DROID RAZR using Tapatalk 2

dedub Collaborator

dedub

Posted
Posted

Really i thought 7psi would be good boost with extra power....what size turbo are you using?

Sent from my DROID RAZR using Tapatalk 2

not shore the number inlet 1.78 out let 1,50 garret.
  • 1 month later...
  • 2 weeks later...
Tinman Community Regular

Tinman

Posted
Posted

and 4000 miles. Fusebox went at 2000. Did diff upgrades from Lenny (THANKS LENNY!) fixed other bits and pieces, nothing major. Abuse the hell out of it though.

Kinarfi Veteran

Kinarfi

Posted
Posted

13,417.9 kilometers and I have been working on it continually, but not necessarily because it needs, I just enjoy doing it and I don't have anything else to do with my time, can't work, so it is something to keep me sane, sort of.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Hunterman22
      2021 Hisun Axis 500 No Start - Need Help Please
      By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • Dennis
      bd 300 bulldog shifting issues
      By Dennis
      I have  a bulldog i bought from home depot in 2013.  In the last season it started refusing to shift from neutral to either forward or reverse.  I changed the trans axle fluid and made sure the cables were lubricated and free.  With a lot of coaxing, I can sometimes get it to shift.  once I start driving it, things improve until I let it set awhile.   Any suggestion on where to go from here?
    • fishhouse3
      2021 CFMOTO ZForce 800 Trail with many extras and full warranty until 2027
      By fishhouse3
      FOR SALE: 2021 CFMOTO ZForce 800 Trail with many extras and full warranty until 2027. Only 625 miles and 50 hours of use.
      In great condition, has a clean title and one adult owner. Has had all scheduled regular maintenance and has not been abused. Only used about six times on weekend trips to Hatfield-McCoy trails in WV.
      Under full CFMOTO Care bumper-to-bumper extended warranty until 8/2027 (paid $1,600). Full service and tune up just completed with new clutch, drive shaft, belt, rollers, etc (paid $1500). Plus it comes with over $3,500 in upgrades and accessories! Way too many included items to list here (see last pics for full details).
      This machine is ready to go and needs nothing - just hop in and hit the trails!  I have over $20k invested in this machine. Priced VERY fair to sell quick at less than half that!!!
      $9,999 WITHOUT warranty -OR- $10,999 WITH full extended warranty until 8/2027.
      Located in Chesterfield, VA 23832. Message me for more pics and info!





    • Clayton Walker
      Im New here but just got my Uforce Fitted for Hunting Season
      By Clayton Walker
    • Kingfish
      Now that I have done the LI-Ion batt conversion, I need to do something about the suspension
      By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...