Quantcast
Jump to content


Emergency brake seal kit

rwwiefer

By rwwiefer
in Joyner UTV SxS Forum

 Share

Recommended Posts

rwwiefer Contributor

rwwiefer

Posted
  • Author
Posted

I have been searching the Chinese market on master cylinders in general, getting close. One thing I have been finding is most of the parts on these are directly off import cars, quad's and motorcycles. Just havn't found the exact bolt pattern yet. Left messages at 3 dealers in Az but no one responds. Thought about maybe installing a line lock like they use in drag racing for a parking brake option.

Link to comment
Share on other sites
Kinarfi Veteran

Kinarfi

Posted
Posted

My parking brake master cylinder failed and I was lucky enough to get one from a friend to replace it with, I think the problem with them is that the plunger is not protected from the element by a boot or anything else. May I suggest the every one put a piece of foam rubber around the shaft to help keep out the dirt and moisture.

Good luck with your search, let me know if you find something and I'll add it to parts and pieces.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • mac66
      Anyone have a Bad Boy Bandit?
      By mac66
      Apparently, these are Hisun or at least they use Hisun engines. I can't find much info on them online yet.  Ran across a used one with just 100 miles on it as a very reasonable price.  Just curious.
      Okay, more info...they are owned by Textron Corp who also owns Bell Helicopter, Cessna & Beechcraft aircraft, Ez-Go & Cushman and Arctic Cat and a bunch of other companies.
      So are thy cheap Chinese crap machines or are they good to go?
    • sxr951
      2015 massimo 700.. need cylinder bolt!
      By sxr951
      2015 massimo 700.. need cylinder bolt!  it some special cut from factory,, its a 125 thread but its like between 8 and 10 mm  dont know where to find any ideas? thx
    • sxr951
      anyone ever have to beat your starter out with a hammer till it broke in half?.lol
      By sxr951
      corrosion had its oring neck area  jammed in.. and besides that had corrosion in the starter just shorted when ran direct jumper cable to the starter post power to it

    • Jason S
      2022 Bobcat 34XL Brake pedal depress to start getting impossible
      By Jason S
      Good afternoon,
      I have a 2022 Bobcat 34XL.  Over time, I have to press harder and harder on the brake pedal before the ignition will fire. Now I have to practically stand on it with all my weight to get it to start.  Does anyone know if there is a spring or something that might need replacing, or have had this issue before? I don't have any schematics of the brake sensor/assembly.
      TIA
    • Michael Wood
      2018 Massimo Buck 400 Brake Issues
      By Michael Wood
      I have a 2018 Massimo Buck 400 with 278 miles. 
      Having issues with my brakes. Took the buggy hunting and when I let my foot off the gas pedal it pulls without pressing on the brake. I looked and the pads on all 4 wheels are all toast. The E-Brake hasn’t been on since I have had it. I am guessing it may be a master cylinder issue because all 4 pads are gone. They all seem to have worn evenly that’s why I think the master cylinder. Just got the machine used from a older couple and they said it sat for some time in there pole barn. Possibly the brake lines? Calipers? I took one brake apart and when I depressed the caliper it didn’t stay. Any help is muck appreciated. 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...