Quantcast
Jump to content


Recommended Posts

Posted

http://www.myclassifiedcentral.com/Article_23863_2008TeamJoynerTrooperT2Review.aspx

A 1,083 cc, manual transmission UTV Story by Tom Roderick, Jul. 18, 2008 http://www.atv.com/manufacturers/others/2008-team-joyner-trooper-t2-review-858.html

The expression of each passerby is essentially the same: a long, hard stare indicating the recognition process at work, followed by the wrinkled brow of unfamiliar identity. If we stop the vehicle we're quickly approached and greeted with the statement, "That's cool," and the quick follow-up question, "What is it?" to which Jerry McCoy of McCoy Motorsports cheerfully replies, "It's a Joyner."

Most have never heard of the Tempe, Ariz. UTV manufacturer, but their interest is apparent and Jerry McCoy enthusiastically obliges their curiosity.

"It's powered by a 1,083 cc, fuel-injected, four-cylinder engine manufactured by Chery," he begins while reaching for the conveniently located brochures and business cards he packed before leaving the parking lot. "It has a five-speed manual transmission, is EPA and CARB approved, comes stock with 13 inches of ground clearance and, get this, retails for only $12,000."

It's the combination of the fuel-injected four-cylinder engine and low price that slackens the jaws of the inquisitive.

The model we're tooling around the Upper Tellico OHV Area is the Team Joyner USA Trooper T2, the twin-seat version of its four-seat counterpart, the Trooper T4. And speaking of seats, the high back bucket ones in the Trooper T2, featuring five-point harnesses, are the plushest backside supports to ever grace a stock UTV. At the end of a long day of slow-grinding our way up and down Tellico's elevation changes, Jerry and I hop out of the Trooper to load it on the trailer without the fatigue often associated with an afternoon spent in the grip of lesser seating accommodations.

Located in the Unicoi Mountains of North Carolina, a component of Southern Appalachia, Upper Tellico OHV is an 8,000-acre park varying in elevation from 2,500 feet to nearly 5,000 feet with miles of rugged, steep terrain. Although strangely unmarked by identifying signs, as if locals were wanting to keep out strangers (In Appalachia? Go figure.), the park is a gem on the North Carolina/Tennessee border. After a while of Jerry driving the Trooper and me snapping the Canon, Jerry slides into the passenger seat while I take over shop behind the steering wheel.

An immediately apparent difference between the Trooper and its Japanese competitors is the use of a five-speed, plus reverse, manual transmission. For those who enjoy actively participating in off-road recreation the manual transmission is a welcome benefit. The almost- too-light hydraulic clutch and standard gear pattern make shifting easy and when navigating steep, rocky single-tracks or when speeding down a fire road the additional skills needed to masterfully synchronize and manipulate clutch and gears heighten the sense of fun and satisfaction. Due to the low gearing and abundant torque of the four-cylinder Chery engine, most of the steep terrain, including rocks and logs, Jerry and I cover is easily managed in second gear.

On the Trooper's dashboard just to the right of the steering column are two toggle switches and two levers. The first toggle switch engages 4WD while the second one operates the winch. With the front wheels under power and all four wheels spinning independently the operator can now lock together the rear or front wheels by throwing the first or second lever respectively.

Combining the Trooper's drive options with 13 inches of ground clearance and 12 inches of front travel from the individual dual A- arms and 12 inches of rear travel from the individual trailing swing arms, most trail obstacles are easily cleared by simply driving over them, but occasionally some finessing is needed to traverse certain encumbrances. Providing our Trooper some extra ground clearance are the McCoy-installed 14-inch blacked-out ITP wheels and 30-inch ITP tires, raising ground clearance by 2.5 inches. The McCoys also installed the optional Safari rack and lightbar kit, increasing the retail price of the vehicle and combined accessories to approximately $13,000.

McCoy Motorsports, renowned in the motorcycle realm as a top tier performance-derived customizer of two-wheelers, offers a power pack for the Trooper that increases horsepower by 25%, from 85 to 105, and top speed from 65 mph to 75 mph. The Pikeville, Ky. business has also been influential in providing Team Joyner with useful input regarding model upgrades and technical changes.

"The cool thing about Joyner is that they listen to qualified dealers when they know somebody does fabrication or is into racing or high- performance," says Jerry. "They listen to what you have to say and they kind of leaned on us."

For example, the McCoys suggested that Joyner employ a CV joint in the Trooper and once Joyner determined it a good idea the company implemented the change immediately.

The four-cylinder engine powering the Trooper is constructed by Chery Engine Company, a subsidiary of Chery Automobile Company. Located in Wuhu City, China, Chery Automobile Co. is China's fourth largest automobile manufacturer -- an impressive accomplishment considering the company's first car rolled off the assembly line in December, 1999. The 1,083 cc engine, located closely behind and below both the driver and passenger, emits a quiet yet pleasurable burble and combined with its fuel injection system didn't cough or chug when asked to perform at either low or high revs.

While the Trooper's manual transmission provides expected amounts of engine braking, the hydraulically actuated, four-wheel disc brakes seemed to lack some initial bite but are otherwise capable of stopping the 1,730-pound machine.

The ample rear storage area is great for carrying tools, spare parts, coolers, firewood and a host of other essentials. Factory accessories for the Trooper include a roof rack, brushguard, GPS and communications systems. McCoy makes items such as a windshield, diamond plate top and more. Factory upgrades available for other models, such as the Commando, and apparently coming soon for the Trooper, include a canvas enclosure kit (think of a softop Jeep) and a hard shell enclosure kit, a heater unit and by the end of the year an air-conditioning unit.

In addition to the Trooper, T2 Team Joyner USA offers 12 other models varying in capacity, style and size from the 250 cc, two-seater, single-cylinder Sand Viper for $4,000 to the two-liter, 5-passenger Sand Runner for $20,000. All Joyner UTVs come with an included three- month warranty (three less than its Japanese competitors) but McCoy Motorsports offers a choice of various extended warranties.

According to the Team Joyner web site the company was founded in 2003 and boasts a 300,000 sq. ft. manufacturing facility with more than 300 employees. Of course that's all in China, but company owner John Burns Sr.'s vision is "to bring an alternative recreational vehicle to the US market that would be recognized by consumers."

If the Trooper is an indication of his dedication to that vision, he may well be on his way.

For more information, visit http://www.tobefast.com/.

Posted

Well, that goes back to when most thought the Trooper actually had 12" of front and rear travel. Actually it was more like 9-1/4" and 7-1/2". The horse power was exagerated quite a bit too. But just the same, with a bit ( big bit) of work and upgrading I find the Trooper to be a very capible machine that will blast the trails, out running most everybody. Its rock crawling ability is impressive. Its a shame that Joyner took such a good concept and did such a poor job in executing it. They could have taken the market by storm but instead, because of poor quality design and fabrication, they ended up with a relativly small groop of devoted followers, me being one of them. Now its too late for them to capture a market as the big guys are starting to produce, instead of a beefed up golfcart like the Rhino, but little off road race vehicles like the Wildcat. Another few years, and they will be available at the same leverl as a full race ready 450 motocrosser. Just think, 150 to 200 horse power, 20 to 22 inches of quality suspension travel and a manually shiftable automatic. Did I say diesel so it also pulls like a catapiller dozer. Unfortuantely, I have too much work and money into mine to think about switching. But, it is now one neat, reliable and fun play toy that runs real strong and soaks up the woops for lunch.

Lenny

Posted

Yeah there nice but your talking almost 20,000.00 out the door.....Hell I don't want to pay that much for a car or truck for daily travel lol..I think what we have is pretty good for the price. You are right if they would have spent a little more time and money in R and D they would have a hell of a machine...Like most of us have now that we worked on....

Posted

Ok guys ya I like the trooper I just wish there was more good news than bad news on this site! I got a lot invested in mine as well Lenny and I can honestly say without this forum I'd give up on the t2! I just wish I had the fab skills or the winning powerball ticket to have Lenny make mine as badass as his ! I wanna make the t2 perfect but not bring a grt welder and a full wallet slow me down!

Dan u r already thinking a motor swap???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Polish DIY Lover
      Hi i'm jakub and i making DIY UTV. Some questions?
    • By shawn b
      my hisun died on me while driving it started losing power then stalled. it wants to start but wont . it didn't over heat. I replaced plug,fuel filter injector, and fuel pump.put code reader on it and says no codes. have any ideas possibly sensor? Any input on what it could be would be appreciated
    • By TPlummer
      We recently purchased the Axis x550. Fueled it with 93 fuel and drove one time around the farm and the 02 fault error appeared. Any ideas? 
    • By Chucky 1
      I purchased a new 2023 Landmaster UTV L4 in October of 2023.  UTV didn't seem to have as much power of the demo L4 that I drove but figured once it broke in it would be better.  After about a week the unit started bogging down backfiring and stopping.  Gas fumes really bad, wait a few minutes and it would start up again.  Brought it back to the dealer and after keeping it for a few weeks said he couldn't find anything wrong with it.  Got it back home and it started acting up again, brought it back to dealer a week later and he said he found couple things that might cause it to do run bad and he was able to replicate the issue but didn't really know what was wrong.  Got it back home again after being at dealer for several weeks and the unit started running bad again right away.  Brought it back to dealer and he went back and forth with Kohler about possible fixes but just checked somethings and try to swap a few parts but still runs bad.  I called Landmaster HQ to speak with someone about a refund and was told that was handled at the dealer level.  Dealer called Landmaster and they told him they didn't do refunds or exchanges especially with units that had problems.  The dealer is now trying to get a new engine to but I have not heard anything as of yet.  I did file complaint with Better Business Bureau and they accepted my claim and reached out to Landmaster.  The National Service Manager called me and said the he had been contacted by the BBB about the complaint and he would look into it.  I told him that I would just like to have my down payment of $2,000.00 returned and never mind the over $1,000.00 I have paid in notes for a UTV that I cannot even ride on without hoping it gets me around the neighborhood.  I have found out that the 2024 Landmaster UTVs will have Vanguard engines due to issues with the Kohler engines.  Very disappointed in what is "Proudly Made in the USA" and the way Landmaster has treated this disabled veteran! 
    • By PossumTruck
      Greetings,
      I have a client that wants me to install a heater of some sort to aid in cold weather starting (she uses it at her business, has had issues starting the last few days in sub-zero). I would prefer a coolant heater to a pan heater (silicone pad), but I cant for the life of me find the diameter of the coolant hoses. Heck, I'm not even sure if it would work as well in this application given how long the hose is compared to tractors and trucks I have installed them in. 
      Any advice you could give me would be GREATLY appreciated. 
×
×
  • Create New...