Quantcast
Jump to content


Aftermarket Shocks for Trooper


dude47

Recommended Posts

The back right corner of my trooper is starting to sag. Think my dad worked it a little hard on the whoops and blew out the shock. Does anyone have a resonably priced set up they used for aftermarket shocks? I can't justify putting 3k worth of shocks on a machine I only paid 4k for used lol.

Thanks for your input in advance!

Link to comment
Share on other sites

Pretty sure but not positive about these numbers for the fronts, less sure about the rears, if you are seriously considering FOAs, I'll check harder to get you the right numbers and more info about what I have.

Qty. Item Name Unit Total
Reservoir Shocks 2.5 FRONT SHOCKS
size - FOA-06
Compression Valve - Light/Medium
Rebound Valve - Light/Med
Mount width - 1.5"
$150.00 $150.00
Reservoir Shocks 2.5 REAR SHOCKS
size - FOA-08 ?????? maybe 10 inch
Compression Valve - Medium
Rebound Valve - Medium
Mount width - 1.5"
$155.00 $155.00
2.5" Springs FRONT SPRING
size - 2.5x14x200
color - Black
$49.00 $49.00
2.5" Springs 1 OF 2 REAR SPRING edited corrected
size - 2.5x10x400
color - Black
$49.00 $49.00
2.5" Springs 2 OF 2 REAR SPRING edited corrected
size - 2.5x10x600
color - Black
$49.00 $49.00
Dual Rate Spring Hardware REAR SPRING SEPARATOR
size - 2.5 shock
collar/crossover -
$25.00 $25.00
Sub-Total: $477.00
Link to comment
Share on other sites

I put on Fox Shocks $ 1000, Coil Springs $ 300 from Off Road Warehouse with 1 free revalve.

Fox Shox 2.0 X 6.5 Coil-over Remote Reservoir Shock

  • Shaft: 5/8'' (.625)

  • Finish: Black / Zinc

  • Ext. Length: 19.35

  • Col. Length: 12.85

  • Reservoir: 2.0 X 8.0

  • Hose: -5 X 12.0

  • Mounting: 1/2 X 1.250

Fox Shox 2.0 X 8.5 Coil-over Remote Reservoir Shock

  • Shaft: 5/8'' (.625)

  • Finish: Black / Zinc

  • Ext. Length: 23.35

  • Col. Length: 14.85

  • Reservoir: 2.0 X 8.0

  • Hose: -5 X 12.0

  • Mounting: 1/2 X 1.250

Link to comment
Share on other sites

How well does your trooper do on whoops and bumpy hard pack? I am very interested in going with foas. They are reasonably priced. Also I have gotta ask how you made your rear fenders?

During this bad weather, (winter), I just reworked the front shocks to have more rebound dampening and haven't had a chance to try them, but I'm sure they are as good as any other shock, way better than stock, and you can rebuild them. The rears were doing quite well, but the front had too little rebound dampening and I have just fixed that, I hope, but need to test it.

I'll have to take some photos of my fenders for you, but the plastic came from http://www.speedwaymotors.com/in the form of a 10’ or 25' X 22" X 1/8” rolls (http://www.speedwaymotors.com/Colored-Plastic-Rolls-25-Ft,31414.html ) and the frame work is a piece of 1" X 1/2" channel iron bent around the tire and supported by 2 1/2" square tubes and stabilized at the front.

photos later today, hopefully.

Link to comment
Share on other sites

  • 3 weeks later...

I put on Fox Shocks $ 1000, Coil Springs $ 300 from Off Road Warehouse with 1 free revalve.

Fox Shox 2.0 X 6.5 Coil-over Remote Reservoir Shock

Amy modifications for mounting them.


  • Shaft: 5/8'' (.625)

  • Finish: Black / Zinc

  • Ext. Length: 19.35

  • Col. Length: 12.85

  • Reservoir: 2.0 X 8.0

  • Hose: -5 X 12.0

  • Mounting: 1/2 X 1.250

Fox Shox 2.0 X 8.5 Coil-over Remote Reservoir Shock


  • Shaft: 5/8'' (.625)

  • Finish: Black / Zinc

  • Ext. Length: 23.35

  • Col. Length: 14.85

  • Reservoir: 2.0 X 8.0

  • Hose: -5 X 12.0

  • Mounting: 1/2 X 1.250

Link to comment
Share on other sites

My whole air shock setup cost me about 1300-1400 rides Awsome can't power slide though without body roll but I like it a lot

Good to hear. They have been trying the new air shocks on the Supercross bikes and they have not preformed as well as the old setups. Most of the riders have returned to there old setups siting lack of feel in the air shocks.

rocmoc n AZ/Mexico

Link to comment
Share on other sites

Ya Rocmoc I really like it, air shocks are coming a long way and over the weekend I watched a show called xtreme 4x4 and theres these new off road airstrutts coming out its almost like a dual rate air shock with lots of adjustment not with just pressure but valving and they also cut the wieght down. Im gonna try post the link when I think to watch it again. What the latest with the JEEPS

Link to comment
Share on other sites

  • 2 years later...

I put on Fox Shocks $ 1000, Coil Springs $ 300 from Off Road Warehouse with 1 free revalve.

Fox Shox 2.0 X 6.5 Coil-over Remote Reservoir Shock

Amy modifications for mounting them.

  • Shaft: 5/8'' (.625)

  • Finish: Black / Zinc

  • Ext. Length: 19.35

  • Col. Length: 12.85

  • Reservoir: 2.0 X 8.0

  • Hose: -5 X 12.0

  • Mounting: 1/2 X 1.250

Fox Shox 2.0 X 8.5 Coil-over Remote Reservoir Shock

  • Shaft: 5/8'' (.625)

  • Finish: Black / Zinc

  • Ext. Length: 23.35

  • Col. Length: 14.85

  • Reservoir: 2.0 X 8.0

  • Hose: -5 X 12.0

  • Mounting: 1/2 X 1.250

You mentioned two different sets here. I take it the bottom info is for the rear shocks?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • By Jon Spruill
      Hey Guys, I have been chasing a stalling condition for about two weeks now. The bike will crank up and idle fine, then after about 20 seconds it will fall on its face and stall. It happens at both idle and while running at various rpms. You can turn the key off, turn it back on and it will fire right back up without trouble. I have verified spark on both cylinders with a spark tester. I have also added an inline fuel filter, and pulled the injectors to verify proper pulse on each. Things I have replaced - (relearn procedure performed after each component replaced): spark plugs, ECU, relay/fuse box, fuel pump, & throttle position sensor - all with no improvement of the condition. The only warning light I get when the condition occurs is the oil lamp. The bike only has 14 miles. I am at a loss and appreciate any help and suggestions! Thanks
    • By Jon V
      Good afternoon. When the timing chain came off its lower gear (previous owner had over-tightened the tensioner), I ordered new parts.. chain, oil-pump chain, tensioner etc.. But now that it's time to put it back together, the main crankshaft makes a clang noise and stops when you turn it by hand. I want to solve this before assembling everything. The camshaft cover is off so that the valves aren't being activated. Should the transmission be in neutral to turn the crankshaft? The engine was running fine until the chain came off the lower gear. Then it would spin when the starter motor engaged so I assumed the crankshaft was spinning. Any advice is appreciated.
    • By jimvmcgee
      I have a 2023 560 T Boss that I just noticed that back up lights not working, the camera come's on. The book tells you about tail light replacement, so was wondering if the lens is just there.
    • By Isaac
      I have a 2013 odes dominator when I get in it.  It ideals fine but when you give it gas it bogs and goes and bogs and won’t go passed 30 can anyone help me 
×
×
  • Create New...