Quantcast
Jump to content


John Deere 825I

DevilDog

By DevilDog
in John Deere UTV SxS Forum

 Share

Recommended Posts

  • 4 years later...
Dan B Community Regular

Dan B

Posted
Posted

The 825i uses the exact same Chery engine as the Renegade with the 812cc engine.  It's transverse mounted to accommodate the CVT transmission.  It wouldn't surprise me that much of the Trooper engine parts (1183cc) are interchangeable with the 812cc engine.  The 1183cc looks like it's an 812cc engine that has been modified to accommodate the extra cylinder.  812cc ÷ 3 cylinders = 270.666cc for each cylinder.  270.666cc x 4 cylinders = 1082.666cc

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • kadams428
      2023 Tracker 600LE EPS Belt Tension/Deflection Adjustment
      By kadams428
      Recently my four wheeler has had an issue of being set in gear and it begins riding on its own (up to 3-4MPH). It also is having difficulty shifting into different gears after riding in one gear (i.e. going from reverse to high gear). It will shift perfectly fine when shut off, but consistently has both issues stated above.
      Previous research has shown me that it could be an issue with belt tension/deflection, however I have been unable to figure out how to do that with these machines. I've seen some clutches have a jam nut and all that is needed is a wrench and an Allen key to make adjustments, but I haven't seen/found that on the 600 clutches. Has anyone done this in the past or have knowledge of how to accomplish this? 
    • doncaron
      2022 Massimo t-boss 550 timing parts
      By doncaron
      Hello 
      I have a 2022 Massimo t-boss 550. I’m looking for a fix for my timing problem. It keeps getting out of timing. Now I’m trying to find the proper parts for the linhai motor. I’m looking for tensioner chain and gear. If there’s anything else I can do to fix this issue please let me know. Unfortunately I can’t afford to get something better so I got to get it fixed. Thanks in advance. 
      Don
    • tim hughes
      2021 axis 500 belt issues
      By tim hughes
      does any one else have a slipping belt on the hisun ...i put new wet clutch one way bearing new belt, cleaned primary and secondary and still get slight slippage
    • Timpiker
      American Landmaster 450E Drive Belt question
      By Timpiker
      My UTV is a few years old and gets very little use.  I just noticed the drive belt slapping the plastic guard and making some noise.  The manual tells me how to replace it but not how to tighten it.  Apparently, there is no adjustment.  Does anyone know if there is an adjustment?  Is the belt supposed to have a lot of slop in it?
    • Copperline
      Coleman 550 Loose Timing Chain
      By Copperline
      I have a Coleman 550 (hisun). Wouldnt start and was sucking instead of blowing through the spark plug hole. Got to the timing chain and it was very loose and for sure the timing was way off. Got the tensioner off and set it to TDC and got the cam gear back aligned. Put the chain back on and set the tensioner as instructed and the chain is still very loose. I extended the tensioner as far as it would go to test and the chain is still loose. 
      Any ideas what could be broken or wrong? Why would the chain be so loose?
       
       

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...