Quantcast
Jump to content


Gauges not working.

Newfietrucker
 Share

Recommended Posts

Newfietrucker Apprentice

Newfietrucker

Posted
Posted

Hello, wondering if I could get help with a couple gauged not working. I replaced some bad gauges. Now I noticed that my oil gauge go all the way up when I turn the key on checked for bad wires. All look good. And another thing is my speed gauge won't move when I drive. It cycles when I turn key on and that's it. I have a 2008 renegade. Any ideas on this problem?

  • 4 weeks later...
charlie Experienced

charlie

Posted
Posted

Idk about speedo but I know the Joyners have issues with the oil pressure switch wich will lead u to think u have low oil pressure or bad gauge, I actually took my switch off and put a tester in I had little but more than factory quoted my gauge is good it's the switch

Newfietrucker Apprentice

Newfietrucker

Posted
  • Author
Posted

I replaced my gauges because they were bad. And my oil pressure switch was bad too. After replacing it the gauge worked fine. Might change my speed sensor too and hope to fix my speed gauge.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • SouthernGypsy
      Help needed, Anyone recognize where this Internally Threaded Bolt belongs?
      By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • JOSEPH LAMAR
      Please help me solve this
      By JOSEPH LAMAR
      I have a 2020 axis 500 and I have replaced the TPS twice and the whole throttle body assembly once and still have code 122. I can barely drive the thing. It bucks and surges like crazy
    • rev6engines
      Black Friday Starts Now At Rev 6!
      By rev6engines
      Black Friday is here, and we’re excited to give our offroad family 20% off on all parts and kits! Whether you're prepping for new trails or just fine-tuning your rig, we've got what you need to keep rolling. Now Is also a great time to upgrade your sled, winter's coming fast!
      If you have any questions or need help finding the right part, feel free to call, text, or email us. We’re here for you!
      Call or Text:
      801) 489-8697
      Email at:
      [email protected]
       
      Happy riding!!! 🤘

    • A P
      2022 Hisun Sector 550 eps. Power steering not working
      By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • Will Sutton
      Coleman UT400 won't rev. Idles fine
      By Will Sutton
      I've got a 2023 UT400 (bought from tractor supply) and I've been beating my head against a wall with it.
      It will start and idle perfectly. The second I touch the throttle it sputters and dies.
      I've checked that the fuel pump is working  (it is).
      I've replaced the injector, throttle position sensor, O2 sensor, and intake air sensor. All with no change.
       
      I've just taken a look a the schematic, and there is a crank position sensor as well.

      Could this be the source of my troubles? If so, where is this thing located? I can't seem to find it on any drawings from the parts suppliers.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...