Quantcast
Jump to content


Head Light Bulbs, Has any one found replacements


Recommended Posts

Got done with my rewire and only made a few mistakes, got the 2wd and 4wd wires reversed. I ran the winch all the way out and back in and it seems my FET H bridge will handle the load, probably ought to try lifting it off the ground to make sure it can handle every thing rather than find out it can't in the field when needed the most.

Also need to replace the head light bulbs but I can't find one locally.

I thought I'd ask if any one has found a replacement, then start browsing the Internet.

Link to comment
Share on other sites

  • 5 months later...
  • 3 weeks later...
  • 4 months later...

hi all maybe this has been addressed idk. What are the connectors called coming off the main headlight with 4wires, 2hi/2lo+ground. I'm looking at a HID kit which has two 2wire connectors, like the fog lights have. is that a standard size, or number ?

You'll never drown, if you're born to hang

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By diamondjfarm
      I got an old 2003 Arctic Cat 375 Auto, and just bought a 2008 AC 650 side by side. Got a new starter, solenoid, and battery for the 650. Gonna change the crankcase oil and filter while I'm at it.
      Anything I oughta watch out for from them that's done the starter/solenoid on this model?
      Don't have a manual yet for the 650. Any recommendations for oil weight/grade?
      Thanks.
    • By Alex
      Explore Kemimoto's CFMOTO accessories collection that will elevate your riding experience. From protective gear to performance upgrades, they offer everything you need to customize and optimize your CFMOTO vehicle. Kemimoto has bags, boxes, bumpers, covers, camera mounts, cup holders, doors, and more! Outfit your CFMOTO today!
      18% off with code AFZ18 in August

    • By Dale Halifax
      I'm a newbie.  While I'm testing out my new to me 2021 Massimo T-Boss 410 winch, I broke the Orange Ring that fits around the cable.  I can't see much of a purpose for this ring, other than to be in the way, and to break.  Is this ring really necessary?  I did find it on the Massimo winch parts diagram, but I'm thinking,  Meah?  Am I wrong?   (It's # 13 and 14 on the parts diagram, attached)
      Thanks.

    • By Retired Plumber
      The rear differential lock light is on and I would like to get it off. How do I do that it is a Coleman UTV700.
    • By great8redsfan
      Okay folks. I have a low power issue. Been like this for a few years. Place I work at bought 3 and all have lost most of the pulling power.  They gave them away after local shop worked on one for 3 months and it had great power for about 1 month and then crap. They replaced throttle body, fuel injector, spark plug and IAC motor. Seat belt switches have wires cut and left open so no seat belt warning light anymore. It revs to 6k rpm in neutral but when put in gear and take off in low it just doesn’t seem to want to go anymore. Running 93 octane fuel with Stabil.  Any ideas greatly appreciated. I dont have a scan tool but no codes on dash. If held to floor it pops a little and runs almost 5K rpm but if I let off pedal about an inch it smoothed out and revs up to 6k rpm. 
×
×
  • Create New...