Quantcast
Jump to content


Recommended Posts

Posted

I'm new here to this site with a Renli RL1100, I'm looking to make more power W/O going turbo or S/C. I read on here about a couple different fuel controllers and wanted to get your thoughts on them and if they are actually worth the money.

(I have used the search function and have read numerous of posts but I figure it would be best for me to just ask a couple of questions to clear up any confusion.)

1. Are the actually worth the money for a stock motor?

2. What are the differences between the Silverbullet and EJK controller?

3. After talking with Silverbullet they guarantee a 15whp gain on a stock motor, is this true?

Thank you for your help!!

Posted

the programmer silverbullets sells is made by ejk or use to be I have it and overall not a huge diffreence but i felt it in the throttle responce I need to get my af sensor to start playing with it

Posted

the programmer silverbullets sells is made by ejk or use to be I have it and overall not a huge diffreence but i felt it in the throttle responce I need to get my af sensor to start playing with it

After talking with SB they stated that a stock buggy put down 49.3whp and with ONLY the F/C the buggy put down 62.4whp, that is a substantial difference that should be felt based off their claim.

Do you think it made that much of a difference?

How much did your fuel economy suffer? I'm not that concerned with losing some eco because I am Full throttle most of the time anyway's but today I know I can make a 100mi loop of fun ridding and not having to worry about running out of gas.

Posted

Sounds good!

Well I called Dobeck today and ordered the EJK controller, I was going to order the SB unit but it seems that they are the exact same so why spend an extra 50 bucks for nothing.

Hopefully the unit will be here on Wednesday or Thursday.

Posted

Well I put my fuel controller on and the setting are not right for the Renli out of the box. I've played with the setting a little bit but still can't get it to actually run right.

I lost mid range power and top end power, I have been working with Dobeck to try and get the settings right, hopefully we can make it work.

Posted

Yea, Dedud helped me dial it in, the settings were way off compared to the Joyner.

It still needs a little bit of tweaking but it's pretty close, well it feels like it anyways.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • By Jim Kessell
      2005 American Landmaster
      EH65 Subaru Robins
      spits fuel from breather hose into the air cleaner and then down into carb.  What’s causing this ??
    • By NC4wd
      Has anyone installed the magnum tuning chip? Is it worth it? Noticeable difference? I have a 2021 Axis 500.
    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
×
×
  • Create New...