Quantcast
Jump to content


Recommended Posts

Posted

and i was wondering who is still out there playing i bought my 2008 joyner back in nov of 2013 and i seem to like it i ve looked through all of the posts and got some good ideas to start with i ll be doing a snorkel tomm and a few other things and these things dont like the cold for shit my throttle keeps reezing on me

Posted

no it was the throttle cable and back by the end of the cable on the throttle body some one did nt listen to his wife and desided it was a good idea to cross a creek hmmmmm the humility of being married i got it thawed out but i m going to be doing some serious water proofing and a bunch of stuff to it i love it being a standard but it does have its down falls do you run a fuel controler.. and i wanna go to 30" tires and power steering at least thats what i have planed for my tax returns programmer power steering a new rack and tires

Posted

i have the silver bullets programmer been on for a year now throttle responce improved and I am going to start playing with the settings on it this weekend. Tires I run 30x9x14 Zillas in the front and 30x11x14 zillas in rear little ruff on the hard pack stuff but they tear up the snow mud and get me over rocks and hills I run 8-10lbs air. No rubbbing enless at full flex but I changed my suspension too

Posted

ok thanks guys and i m having a hard time trying to find a coupler to connect the snorkel to the factory intake tube i m going to go with a larger one to hopefully cut down on and noise that it may create

Posted

and the one from super atv will it still work with the lockers ??? and i did nt really want to have to fab a bunch of stuff i like to keep it simple as i can

Posted

sounds like super atv is the way to go .... i just did my snorkel today i did it with a 3 inch exhaust pipe bent to a 90 about a foot over my head ...it also looks like some one put a bigger fuel pump in it stock gauge reads 82 lbs at idle and the after market fuel pump i bought off of ebay as a back up seems to have alot smaller fitting on it.... i think the snorkel gave it alot more bottom end or is it my head playing tricks on my .... bigger air filter ... bigger pipe .... colder intake air ...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By JimWil
      Looking for a place/website to order a  replacement bench seat and a dump bed fender from.
      Pics are the original orange when purchased and after painting with a textured bed liner type coating.
      Just looking for those two parts as mentioned above.
      JimWil
    • By joynersfuntillitbreaks
      so i just picked up a 2008 1100 trooper and iv ordered a few parts for it now and 99% of what i got fits perfect my issue now is my rear wheel hub is stripped out got a new cv and it fits great but i order 2 different hubs from 2 different places now and they are both wrong the spline opening is to small to fit the factory cv shaft and yes the shaft factory part #s are the same paid 250 for an original new replacement if anyone has anything that works to replace the original hub please point me in the right direction 
×
×
  • Create New...