Quantcast
Jump to content


Recommended Posts

Posted

I woke up around 2:00 to the smell of gasoline, figured it was on my hands or clothes still after working on my trooper all day, but couldn't really smell it on my hands, so I went down stair to see if it was in the garage, opened the door and the smell about knocked me over. There was gas puddled all over the floor and you could see where it had been but dried up. After I got the doors all open, I started looking for the cause and first look at the fuel tank and it was easy to see, my fuel line had broke, bad part is I had filled the tank to the brim the day before, so all 8 gallon had drained out. Could have been disastrous!!!! It's fixed now and when you look at the photo, you'll notice that the hose is polyurethane tubing, ether style if I remember correctly. I have had other pieces of it go weird also, but this is the first problem it has created. I used to think this stuff was really neat stuff, not now!!!!

My recommendation is that if you're using it. Get rid of it, I have got rid of all of mine yet, but I don't have any below the top of the gas tank.

Kinarfi

post-90-0-84416300-1405312780_thumb.jpg

Posted

I will keep an eye on mine-- thanks!

I was reading my Wildcat service manual the other day. It recommends the fuel lines be replaced every 2 years. Considering the bad Chinese rubber we know is on our troopers I may be doing a fuel line replacement soon.

Posted

The rubber lines seem to be fine for many years (IMHO) and I thought the tygon tubing was going to be great because you can see through it. The line that broke is still soft and flexible, just broken now.

Guest Lenny
Posted

Polyethylene tubing is fine. Its more of a translucent milk color and you can still see thru it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Homeowner A
      I have a Coleman UTV 400 and looking for something to store it in.  Preferably something vinyl or plastic with its own base that can stand alone outside and house the UTV.  I think the dimensions of the UT400 are around 106" long 52" wide and 74" tall. 
      What should I consider that won't break the bank?    
    • By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
    • By TPlummer
      We recently purchased the Axis x550. Fueled it with 93 fuel and drove one time around the farm and the 02 fault error appeared. Any ideas? 
    • By Chas
      When traveling in the 40 mph range and throttle is released machine starts surging instead of a gradual slow down any help would be appreciated as dealer is clueless 
×
×
  • Create New...