Quantcast
Jump to content


Recommended Posts

Posted
Hi guys, I present my name is adrian and I am new to the forum and am a novice in relation to the issue of road vehicles.
I would like to help me based on your experience and knowledge.
In particular it relates to this little machine, Joyner sand viper 1100.
I personally really like their aesthetic features as mechanical and especially the (reasonable price) And just to complement my purchase I'd like to help based on your knowledge with this vehicle.
I refer to the advantages and disadvantages that exist on this machine.
But mostly I would like to know if there is a large (inventory) of parts and spares and if it is easy to find nowadays parts and spares for me that's the most important.
Another important point (these vehicles are constantly broken) most of the forums only speak negative things about these little cars and the truth I have faith that that's not true, I do not think these cars have such poor mechanical reputation.
Gentlemen I hope your answers, your experiences will be of great great help me, it will be important for me to make my purchase for your attention many thanks good day.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By fikey
      I am considering a Hisun 550 for tooling around the farm> I have a Kawasaki Teryx 4 and deeply disappointed at the difficulty of getting to the engine and belt for repairs. I would like some feedback on the Hisun's reliability and ease of access to work on. Thanks.
    • By CSM_Retired
      This is for all of you Kioti Off-Road UTV, SxS (Side by Side) owners. Discussions about Kioti Off-Road specific topics including the Kioti Mechron, K9, 2400, and 2440 models. 
    • By SayHiToRambo
      08 trooper 1100
      Bit of background. First the machine would take for ever to start. So I adjusted the valve shims into spec and made sure the timing is correct. Starts perfectly now. 
       
      now it fluctuates on idle. Bogs down, Revs up, repeat. I noticed the fuel pressure drops from 60psi to 20psi while that happens. It also bogs down at the lower end of each gear, higher rpm seems to be fine. Seems to struggle under load. In neutral it revs up perfectly. 
       
      brand new fuel pump, fuel filter, gas. I noticed on the fuel pressure regulator there’s that vacuum nipple, it’s not attached to anything and I’m not sure where it would go. Possibly the problem? 
       
      Another issue is the tip off the end of the exhaust is broken off, sensor is still attached and connected. Could that cause these issues? 
       
      my next plan was to look into the pressure regulator and voltage to fuel pump while driving. Is there anything I’m missing or any ideas you guys have? 
       
      thanks! 
    • By allinone
      Recently purchased 2nd hand not going Crossfire GT400 (Australian branded name?) 2020 model.  Has some issues what would be the best forum to pose questions.
      Thanks
    • Get More For Your Device
    • By Prepper
      Hello All...
           Just bought a 2014 Massimo 500 UTV.  It;s not running at the moment, but hopefully will soon.  I need a seat for it also (passenger side, if it makes any difference.)  It is a crank-but no start situation.  Just now starting to read the boards for solutions.  Apparently these models are well known for this issue.  If anyone has any suggestions, please feel free to chime in, it would be greatly appreciated.
      Thanks 
×
×
  • Create New...