Quantcast
Jump to content


Recommended Posts

Posted

I have seen a few variations of the new Gear Reduction Box's Has anyone tried the new UTV Solutions Gear Reduction box's or portal box as some say. From what I am seeing the GRB provides 4” of lift by moving the axle centerline upwards by 4” at the wheel hub, allowing for greater ground clearance under the axle center. By moving the axle centerline, we’re able to maintain factory positions and angle measurements on the upper and lower control arms, Axle shafts, and tie rods.

The GRB also provides a wider stance, adding approximately 3” to each side. The wider stance allows you to go over or around the well-beaten path left by other UTVs and ATVs

DSC08491.JPG

DSC08490.JPG

DSC08492.JPG

Click here for full information on the polaris gear reduction box - portal boxes for rzr - can-am-yamaha-honda utv's!!

  • 2 weeks later...
  • 4 weeks later...
Posted

Yes that price would be for the RZR 570. If we could get our hands on a Joyner it wouldn't be that hard to make a box for them as well. We would just need to know spline count on the axle and caliper mounts for it. I would think it would be that much more for it just time and effort. I never knew there was such a demand for custom Joyners out there...

  • 6 months later...
Guest WillieOi
Posted

LEDOS- Производство светодиодных светильников lp 02 40>>>

Фирма Ledos специализируется на производстве и поставке светодиодных светильников в городе Москва. У нас Вы можете приобрести внутреннее и уличное освещение, источники света, а также комплектующие для светильников и прочее. Услуги, которые предлагает компания: подсветка фасадов зданий и сооружений, освещение офисных помещений и прочие виды услуг. Предоставляем скидки своим клиентам. Подробности на сайте Ledos.Su.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By CSM_Retired
      This is for all of you Kioti Off-Road UTV, SxS (Side by Side) owners. Discussions about Kioti Off-Road specific topics including the Kioti Mechron, K9, 2400, and 2440 models. 
    • By Homeowner A
      Is there a code reader available for the Coleman UTV 400?  I tried using the HUD ECU Hacker software and cables/adapters but no luck OBD to delphi 6 pin and KKL VAG as well as ELM327.  Will not connect.  I was able to get it to connect randomly a couple of times, but haven't been able to since.  I was able to clear and read the codes briefly.  I'm aware of the Tiny Scan 301 but it doesn't seem to be readily available.  There's a few out there but they are expensive.  
    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By Homeowner A
      Could someone please recommend a reputable shop to troubleshoot and repair a Coleman UT 400 in the DFW TX area?  
    • By carl baney
      have a 2021 tracker 800sx noticed locks on box when u fasten both sides of box are cracked anyone else have this probl
×
×
  • Create New...