Quantcast
Jump to content


Recommended Posts

Posted

Bought a brand new Polaris 800s in 2012 for my wife ($18500). My first service was $650 (20 hrs) my second service was $2000 and my third service was just quoted at $1100 (now has 60hrs) but my dealer said they could make it $500 and I could do the front ball joints next year.

My wife with our 5 years follow me around our lake and we take it pretty easy, i could drive my wife's Audi S5 convertible just about 95% of the trails we take.

My Suzuki Quad has cost me $200 in Maintenance in the last three years.

Dealer tells me I have a lemon and he knows guys with 3600km and spent $200 in maintenance...

Just looking at what the general consensus is out there...Maybe my dealer is a crook!

But Polaris has lost my business and I buy lots of toys.

  • 1 month later...
  • 3 years later...
Posted

$3000+ for service on a new machine with 60 hrs on it?  You're being taken for a ride for sure over very rough terrain.  Maybe the lemon law applies here - it is a motor vehicle.  I would demand a refund and explain that social media can be an excellent venue to let people know where to spend their money and where not to spend it.

  • Like 1
  • 2 months later...
Posted

You are being taken for a ride my friend, sorry to say.  Polaris makes thousands of machines every year, they are the number one selling machine in the offroad market.   They are also number one in another category, that is consumer complaints per 100 machines manufactured.   Yes the big guy Polaris has the most problems of any manufacturer out there with the exception of the cheap Chinese machines.  Three years back I wanted a new UTV and looked and searched for almost 4 months, drove hundreds of miles and weeks and weeks of reaserch.  I am retired so I had plenty of time to sit on the computer day in and day out and come to find lots of interesting information.  I choose a Kymco 450i UXV,  first reason it is a smaller machine, second the reliability of the engine. Had more features than other brands and the dealer had an actual test track with hill climbs, mud, etc.   I was told to run it thru its paces, and I did.  These machines are built in Taiwan ...not china..they have been in business for 30 years and a major supplier for major brands like Artic cat, Suzuki, Yamaha and even Honda for many years.  Here is the best part..... they have the lowest consumer complaint rating per 100 machines manufactured of any major offroad manufacturer in this country!!  Mine is 3yrs old has more than 900 miles and has O issues, one recall for a seal on the throttle cable which the dealer took care of and gave my machine a thorough inspection of everything while it was there, all at no charge.  Never been back since...no issues.   Polaris has name recognition in the market and they make lots of machines but they do require lots of expensive maintenance.  I would definetly start bombing Polaris with negative advertising and post everywhere you can and the dealer also, let others see how you have been treated.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By NC4wd
      Has anyone found a lift kit that fits an Axis 500? Mine is a 2021.
    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By rev6engines
      Black Friday is here, and we’re excited to give our offroad family 20% off on all parts and kits! Whether you're prepping for new trails or just fine-tuning your rig, we've got what you need to keep rolling. Now Is also a great time to upgrade your sled, winter's coming fast!
      If you have any questions or need help finding the right part, feel free to call, text, or email us. We’re here for you!
      Call or Text:
      801) 489-8697
      Email at:
      [email protected]
       
      Happy riding!!! 🤘

    • By Greg Kilgore
      Last year bought a small universal coolant style cab heater. Well I installed it today. Thanks to another member, RangeRider45, and his install
       
      That told in his post the size fitting he used. I got the same fittings plus a few others. And all went kinda smooth. Took a few minutes to get air purged from coolant system. Should have parked on hill with front up in the air. But would have had a hard time working on it.
      I had a variable power switch connected to an overhead cab fan. Never really used the fan that much. And I have to remove the fan to put on my cab enclosure anyway. So I repurposed the switch to supply power for the heater. The heater has 2 12-volt DC computer fans that are rated for 1.8 amps each. So it's not going to be a big drain on the weak charging system. And with the switch I've got great control over the speed of the fans.
      If anyone is interested the radiator hoses are 7/8 inch. I reworked the temperature sending unit (moved it closer to radiator) to make room for all the extra plumbing I did to get the heater to work the way I wanted. 
      Plumbing parts list.
      10-15 worm water clamps. 3/4 to 1 1/4 inch size.
      2 1" x 3/4" x 1" PEX Tee
      1 3/4" PEX ball valve
      1 1" PEX ball valve
      5/8" heater hose. I got 6' and probably have 4' left over.
      I used the radiator house I cut out to use as splices between the PEX fittings. The PEX fittings are not true to their dimensions that are stated on the package. So they fit the 5/8" and 7/8" very nicely.
      They way I have it plumbed is from radiation out side. A tee, then the 1" ball valve, then a Tee. Coming off the Tees are the hoses going to the heater core. There is a 3/4" ball valve on one of the Tees. The ball valves are used to bypass the heater core in the summer. Or direct the hot coolant through the heater core in winter. The temperature sending unit tells me how hot the coolant is. And if anything is getting too hot. The dash also has an idiot light that comes on if the head gets too hot. But doesn't do anything if the radiator gets too hot. There is a temp sensor on the radiator that controls the electrical fan. But if the coolant isn't circulating. That switch never sends a signal to turn on the fan. But enough talking/rambling. Everyone wants to see pics. The only thing I need to change is the orientation of the handle on the 1" ball valve. I have 2" or more clearance between the handle and the tire when cut hard right. But I still don't like it. And instead of taking the valve out and rotating 180°. I'm just going to take the nut off and rotate the handle 180°. Think I need to make a locking mechanism to lock the handles in place so they don't vibrate closed when the machine is moving.
      The temperature sending unit and housing. Size 22 mm. Aluminum from Amazon.

      Upper Tee the lower Tee is identical. Can also see the handle of the 3/4" ball valve on the 5/8" hose going to the heater.

      The 1" ball valve. Goes between the 2 Tees

      Wide view of the plumbing.

      The heater installed in the sxs. The 3 black hoses are just hanging there. Zip ties to the heater but not attached to any thing. Will probably just direct 2 toward the wife's feet. And 1 toward mine. Or what ever is need as the heat is needed on rides. The black hose in passenger floorboard is some 1" hose that is not needed. Don't know what I'll do with it.

       
      I think if I was going to do it again. I'd put some Indian Head gasket dressing or silicone on the 1" side of the PEX fittings. And I may still do that. But I really hate the ideal of introducing air back in the coolant system.
       
      Any questions just ask. It may take a while to answer. But I'll try.
      Ya be good and stay warm over the next few months 
       
      Kilgore.
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

×
×
  • Create New...