Quantcast
Jump to content


WPS Adds HiPer Technology Wheels to ATV/UTV Catalog

UTVBoard News

By UTVBoard News
in UTV News and Information

 Share

Recommended Posts

UTVBoard News

UTVBoard News

Posted
Posted

HiPer Carbon Composite beadlock wheels
HiPer Carbon Composite beadlock wheels
Boise, ID – December 19, 2014 – WPS is pleased to announce the addition of HiPer Technology wheels to its ATV/UTV catalog. HiPer Carbon Composite 14" beadlock wheels are the lightest, strongest, highest performing wheels available for side-by-sides and utility all-terrain vehicles. The wheels have been proven in the toughest race conditions around the world, including the famous Dakar Rally and Baja 1000. Utilizing HiPer’s proven carbon composite technology; the Fusion and Sidewinder are unlike any wheel on the market and are proudly made in the USA.

“We are excited to have WPS as a distributor of the HiPer brand,” said HiPer Technology’s Glenn Merchant. “It’s a great fit for our company and we look forward to building a profitable future.”

HiPer wheels are available in single beadlock or dual beadlock versions. The 14-inch diameter wheel weighs less than most available wheels, which allows owners the benefits (such as improved acceleration and braking) without the power-draining weight increases of traditional 14-inch aluminum wheels. HiPer Fusion wheels come with a precision machined 6061 billet center to give it the added strength; while the Sidewinder comes with a cast center.

HiPer Technology wheels are expected to arrive in WPS warehouses around January 2015. For information about WPS and its growing list of brands and product offerings, visit: wps-inc.com.

About WPS Distributing

Boise, Idaho based WPS (Western Power Sports, Inc.) distributes over 120,000 products; including offroad and street motorcycle, ATV and UTV, snowmobile, and watercraft parts and accessories to dealers nationwide. Currently one of the fastest growing nationwide delivery systems of powersports industry products, WPS distributes products through its regional warehouse network; with locations in Boise, Idaho; Fresno, California; Memphis, Tennessee; Elizabethtown, Pennsylvania, and Ashley, Indiana.

Follow us on Facebook at www.facebook.com/UTVGuideDMlShj0aYUI

View the full article

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • redDance
      “Fake” Beadlock Rings
      By redDance
      Does anyone know where to get beadlock rings that can be welded or mechanically fastened to stock uforce 1000 rims.  Totally for cosmetic purposes 
    • tskm
      2014 Artic cat “wildcat” 1000 rear diff
      By tskm
      in desperate need of a rear differential for my 2014 wildcat 1000. It has blown up right in the midst of the hurricane that struck us here in N/W N.C. I could really use this machine right now. No luck finding this from Artic Cat or the many numerous online vendors. Any info or resources wil be greatly appreciated !
      Tom 
    • Hutch
      2014 Bennche Bighorn 700 Won't stay running
      By Hutch
      Okay everyone, need some help here. I got my 2014 Bennche Bighorn 700 from my father inlaw. He has had it since new and as far as I know never had any problems with it until recently. It began with it being hard to start and having to give it some throttle for it to start up. Then it wouldn't stay running once it did start. If you go to start it, it will fire right off and only run for a split second and then die. If you give it some throttle it will start and stay running as long as your foot is on the pedal. While it's running its pretty rough and backfires. Here is a list of everything I've done so far. Initially I checked compression and it was low. I changed the cylinder, piston and rings. Took the head apart cleaned and laped the valves. Checked timing a few times. Adjusted the valves. New spark plug. Checked the air filter, it was fine. New battery. Changed the fuel pump because of a broken fitting. Changed the fuel filter, lines and fuel injector. Dumped the old fuel and put new in. Changed the air idle control, TPS, MAP sensor, Voltage Regulator, ECU and harness. I was getting codes 31, 107, 113 and 122 on the display. Once I changed the ECU no more codes have been displayed but still have the same issues. All fuses look good and as far as I can tell Grounds are good unless there are some I can't find. I'm at a loss here. Not really sure where to go. Compression was better after everything I did but I don't remember the numbers. I'll have to check it again if someone thinks that could be the issue. Any help would be greatly appreciated!
    • Boone
      2014 coleman 700 utv starts idles about 15 seconds then dies any thoughts would be appreciated
      By Boone
      Coleman outfitter 700 efi utv
    • Alex
      CFMOTO and Potential Motors announce industry-first ADAS technology for OHVs
      By Alex
      This is an interesting read. ADAS is main stream on cars these days. The technology looks to be headed towards UTVs and Off-Road Vehicles.
      Potential Motors and CFMOTO USA have announced a new partnership to integrate advanced driver-assist systems (ADAS) into recreational off-road vehicles for the first time.
      Sam Poirier, CEO and co-founder at Potential Motors, says the integration of its technology into CFMOTO’s vehicles will set new standards in the side-by-side segment. (Photo: Potential Motors Inc.) The partnership will first see Potential’s tech integrated into CFMOTO test vehicles. The companies will conduct extensive real-world testing at Potential’s purpose-built off-road proving ground in Fredericton, Canada, and CFMOTO facilities.
      Source: https://powersportsbusiness.com/top-stories/2023/12/19/cfmoto-and-potential-motors-announce-industry-first-adas-technology-for-ohvs/

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...