Quantcast
Jump to content


Winch rope

Kinarfi

By Kinarfi
in Joyner UTV SxS Forum

 Share

Recommended Posts

Kinarfi Veteran

Kinarfi

Posted
Posted

I bought 100' of 5/16" AmSteel-Blue AS-78, 13,700lb. Breaking Strength, Blue, rope for my winch and found I could put twice as much of this stuff on my winch spool as I could the wire rope that was on it. Doing it just because you can is not always a good idea. Later I needed my winch, real bad, and I let out the necessary amount of rope and started pulling. Because the new rope does NOT hold it's shape like the steel rope, the inner windings compressed and created a side pressure on the ends of my spool and blew it off. Some of the rope got damaged by being forced into the break and I ended up cutting a little less than half off. It will be carried in the Trooper, just not in the winch spool. Also, you have to consider that this is the original winch and has got me out of a few jams, but it's not the best winch out there and this is what I think happened.

post-90-0-39357700-1426665009_thumb.jpg

post-90-0-07516800-1426665020_thumb.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • UTVLover253
      🏁 $100 Gift Card for 30-Min Zoom Chat – Share Your ATV / UTV Experience! 🏞️
      By UTVLover253
      Hey everyone – my name is Adam and I’m doing some market research to better understand the ATV / UTV community. I'm especially interested in hearing about:
      What you use your vehicle for (work, play, etc.)
      What you love about it
      What frustrates you
      What the overall experience of riding has been like
      If you're open to hopping on a casual 30-minute Zoom or phone call sometime this week or next, I’ll send you a $100 gift card as a thank-you.
      No sales, no pitches—just listening and learning. I'd also just ask that you send over a photo of you and your side-by-side in action (nothing formal—trail pics or selfies are totally fine!).
      If you're down to chat, drop a comment or DM me and we’ll find a time that works. Would really appreciate the chance to learn from you 🙏
      Thanks!
      – Adam
    • Grant
      Can’t figure out what part I’m missing
      By Grant
      I recently bought an axis 500 and it’s missing a box or something the plug is L shaped I’ve looked through the wiring diagrams and still can’t figure it out. The plug is located right near the battery housing 

    • Bloodhound
      2016 can am commander
      By Bloodhound
      Don't know the size anyone know the reliability fo theae
    • Clayton Walker
      Im New here but just got my Uforce Fitted for Hunting Season
      By Clayton Walker
    • BMurph
      Please help 2021 Axis 750 crew won't shift into gear and found milky oil on inspection
      By BMurph
      Hello everyone! I am new here and have no experience with UTVs but I am quickly getting some. I have a shifting problem where I can shift through all gears without the engine running but as soon as I start the engine I can not select a gear. Yes, foot is on the brake and yes the pin is being pulled to go into reverse if I was to try going into reverse. The shift lever does not move. I adjusted the linkage to get more accurate shifting with the engine off so I know those are now correct. I opened the shift lever housing to inspect the teeth on the gear and found this picture below. Why is this oil so milky looking? I assume with oil like this I'll need to replace the wet clutch as well but am not positive. Does anyone have any input into how to flush this system and get things shifting correctly? Thanks in advance for all the help!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...