Quantcast
Jump to content


Recommended Posts

Posted

The turn signal lights come on, but do not blink. I was told that it is similar to a car and that I would find a burnt out blinker under the dash. This is not the case with my Trooper. Where should I be looking next? If anyone has a picture of the area, that would sure help.

Posted

Chaco the connections at the blinkers make sure no water had gotten in there of course check the fuses behind drivers seat and under dash r/f side. I'm auto tech I always find with blinkers it's simple power ground bulb or corrosion just my thought

Posted

Chaco the connections at the blinkers make sure no water had gotten in there of course check the fuses behind drivers seat and under dash r/f side. I'm auto tech I always find with blinkers it's simple power ground bulb or corrosion just my thought

The connections at the light have been checked and found to be ok. With the turn signal turned to the left, both lights come on, but do not blink. With the turn signal turned to the right, both lights come on, but do not blink.

There is a black box behind the drivers seat, but it does not contain fuses. There is a sealed (white) box behind the passenger seat? When you refer to fuses under the dash r/f side, do you mean the passenger side? If so,

how do you get to it? There is a cover panel, however it does not have blind nuts on the inside and the nuts turn with the bolt.

Posted

My trooper is 09 behind the d/s i black metal black box the protects the ecm nxt to that there is a black plastic box which holds fuses even if the fuses are good u might wanna in bolt it and look at the back side for corrosion and burnt wires I think there are relays there to. On mine under the right side dash I have a black plastic box with fuses and relays I would check them as well. Does your hazard lights work normally

Posted

My trooper is 09 behind the d/s i black metal black box the protects the ecm nxt to that there is a black plastic box which holds fuses even if the fuses are good u might wanna in bolt it and look at the back side for corrosion and burnt wires I think there are relays there to. On mine under the right side dash I have a black plastic box with fuses and relays I would check them as well. Does your hazard lights work normally

Posted

My trooper is 09 behind the d/s i black metal black box the protects the ecm nxt to that there is a black plastic box which holds fuses even if the fuses are good u might wanna in bolt it and look at the back side for corrosion and burnt wires I think there are relays there to. On mine under the right side dash I have a black plastic box with fuses and relays I would check them as well. Does your hazard lights work normally

Looks like they made changes between the 08 and 09 models. I attached a couple of pictures for you to look at. I have to be out of town until Monday, so will have to put this on the back burner until then.

post-1654-0-92930500-1440078055_thumb.jpg

post-1654-0-29457300-1440078060_thumb.jpg

post-1654-0-02284400-1440078064_thumb.jpg

post-1654-0-09764500-1440078069_thumb.jpg

Posted

Ya that's a little different than mine have u looked at the terminal for the turn signals them self inside the light housing?

Found it. On the 2008 there is a mount on the battery box (next to the tranny tunnel) that the turn signal blinker is mounted to. When I pulled the part number, it looks like they used the same blinker as the 650 sand viper sand buggy.

Found the part on E-Bay for $10.00. Thank you for your help.

  • Like 1
Posted

Found it. On the 2008 there is a mount on the battery box (next to the tranny tunnel) that the turn signal blinker is mounted to. When I pulled the part number, it looks like they used the same blinker as the 650 sand viper sand buggy.

Found the part on E-Bay for $10.00. Thank you for your help.

Can you post a photo of the blinker and the part number? My Trooper has numerous modifications by the previous owner(s) so I always struggle to find things where they should be. Your fuse box behind the passenger seat is quite different from mine. Thanks.

Posted

Can you post a photo of the blinker and the part number? My Trooper has numerous modifications by the previous owner(s) so I always struggle to find things where they should be. Your fuse box behind the passenger seat is quite different from mine. Thanks.

I have attached a couple of pictures. The part is located down at the bottom of the battery box and hard to get a picture of, but did my best. I was able to include a picture of the part itself. There are two metal brackets welded to the side of the battery box. A rubber boot slips over the two brackets and the blinker fits securely into the rubber boot. The part came from Borossi-Joyner, part # JSG142 and the price was $9.99.

post-1654-0-27093700-1440810285_thumb.jpg

post-1654-0-09108200-1440810286_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
    • By Alien10
      I added lights to the Coleman Outfitter 550 last fall.   I bought lights on line from Nilight, a 300 W  12" light bar mounted forward and 2 square 4" floods for the rear.  Those are mounted on the roof corners facing rear and downward just beyond the tailgate.  Nilights seem to be of high quality, as I've had them on my garden tractor for 5 years and still flood the way ahead with great light. 
      Both the front and rear lights provide amazing illumination making the OEM headlamps look like parking lights.  Made a connector for the front bar that plugs into existing headlamp switch so it is just part of that circuit controlled by the headlamp switch.   Rear work lamps were wired in using a rocker switch installed in the dash.  Backed up to the garden with the work lights and was able to harvest some tomatoes well past sunset. 
      What have you used if anything for auxiliary lighting on your UTV?
       
       
×
×
  • Create New...