Joyner Chery Motors of Hong Kong

[silverbullet]

Silverbullet

Hello i have some good news for UTV BOARD members we have made a deal with Chery Motors of Hong Kong.We can give you Members a 20% discount on all original Chery Motor Parts.These parts are original Chery parts.Not Joyner but Chery parts.Please make sure you let us know you are a UTV Board Member.We will carry all motor parts for the 1100cc & 800cc Motors.Also Chery motor parts for other company's including Renli, Reeper, John Deere 825I motors.Also the 650 Spider and Commando motor parts 2 cylinder motors.We can get complete Motors, Transmissions The discount is for motor parts only.Complete motors & Transmission at a great price.

Thank You

Matt

[bigdan120]

Thanks Matt!

[kandlinaz]

Good to know, thx Matt!

[silverbullet]

silverbullet

Thanks Guys

Matt

[2scoops]

Out of curiosity can you see if there are any bigger motors chery makes that would bolt up to our current transmission? Need mo powa, but I don't want to do a turbo if it can't be tuned. And yes I have the fuel controller.

[plumber]

2scoops, The cams are your best bang for you money just my 2¢.

[boarder]

Is this the same company that makes automotive?

[silverbullet]

silverbullet

I am looking in to bigger motor.I am not sure it would be cost effective.

Thanks Matt

[boarder]

Hey noting against with the company, just curious to know.

[silverbullet]

2scoops, The cams are your best bang for you money just my 2¢.

Thank You

Matt

[silverbullet]

silverbullet

Sorry I do not know what the question is.

I have checked on the 1500cc motor and will know in a few days.I do not think the transmission will work.The motor has to much torque.I have looked in to Diesels but transmission wont work same reason plus different bolt pattern.

Thanks

Matt

[plumber]

And if anybody gets the cams. They should let Silver Bullet install them on your head. So all you have to do is unbolt it and bolt it back on. Cams and the right intake made a big differance.

[2scoops]

Matt, what is the cost for the cam and install?

I never was sold on the cam mainly because it's just a regrind right? And I never saw any performance numbers, just seat of the pants reviews. Most of those were in conjunction with other upgrades also.

Plumber, if you are saying there is a big difference then I take your word for it.

I am not opposed to going to a new tranny & engine. Problem is finding a fwd tranny with a super low first gear.

The output shaft is the weak link in the drivetrain. I looked at having one built out of 300M. They wanted $1200. Little to steep for me.

[plumber]

2scoops, I like the cams I mostly always going up a hill. And they give it a little more ass. But you need to look into that other intake part it just has a better flow. Like the old corvette motor had the long intake tubes for torque. I just say it's not a hard job IF you let Silver Bullet install them on your head. I had to send mine to Rick. And he done it and send it back to me and it was done right. The first mechanic said he could do it and he bent 4-valves. You will need a fuel controller

[Moody]

Where can I get a transmission/gearbox for a 2014 xy1100uel?

[silverbullet]

silverbullet

2014 is 1100XY. Let me know what model Xy is it the same as joyner 5 speed manual.Or is it the cvt belt drive.I can get any transmission.

The 1500 cc motor will not fit the 1100 Transmission.Completely different.

 

Thanks

[Moody]

I have the Cvt belt drive

[silverbullet]

silverbullet

Moody i can check.I need type number and picture of your transmission.Please send to my email to [email protected]

Thanks Rich

[Moody]

I will pull it out of the utv and then send pictures. But I also attached a picture I found on the internet that it looks like. I will send pics to you as soon as I can thanks

[silverbullet]

silverbullet

I  emailed you and said to send pictures of gears you [email protected] Always better to call than email.To much wasted time going back and forth.

Frankie